To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

ULTRA MARINE Anchor stainless steel

Art. No.	nominal weight (kg)	A (mm)	B (mm)	F (mm)	G (mm)	H (mm)	I (mm)	L (mm)	width (mm)	Price (unit)	Delivery time	Note list	Buy

Downloads

The ULTRA-anchor, made from DUPLEX High-strength stainless steel (AISI 316L) stands out through high strength and optimal holding power on every seabed.

The special design, the hollow shank and a lead filled tip amount to perfect weight distribution, and ensure fast and easy penetration into the ground. The hand polished surface protects from corrosion and prevents sand and mud from sticking to the anchor.

Every anchor is handmade in europe.

Classified as a SHHP-anchor (Super High Holding Power).

Questions about the product?

Similar products

Anchor weight stainless steel

Anchor weight stainless steel

Asymmetrical ring made of polished stainless steel, for safe mooring.The ULTRA MARINE increases the overall weight of the anchor system and changes the angle of pull of the chain, making it less likely that the anchor will break out of the anchor shank. The shape makes the ring easy to thread onto the chain.For recovery, the ring can be deflected down to the anchor shank so that the anchor can be broken out directly over the shank.

From €694.00 *

ULTRA MARINE chain connector FLIP in A4 stainless steel

ULTRA MARINE chain connector FLIP in A4 stainless steel

The ULTRA FLIP SWIVEL by ULTRA MARINE is a high strength chain connector crafted from A4 stainless steel (ISI 316L). The unique design allows the anchor and chain to be connected without further accessories. Due to the optimised swivel joint, the anchor will orientate itself the right way up, without any human interferance, therefore reducing the risk of getting harmed. Hexagonal lock screws eliminate the need for additional nuts to secure the swivel.This chain connector also works for different anchors.

From €397.00 *

Last seen products

More articles from this category

ROCNA anchor

An invention from New Zealand: The ROCNA anchor stands out for its exceptional holding strength in all bottom types. This "super high holding power" (SHHP) anchor is hand-made from high-strength steel and hot-dip galvanized. The strong bail brings the anchor to the optimal angle for setting every time, the chisel-shaped concave blade with integrated kink combines high holding power with optimal grabbing charateristics that are supported by exceptional weight and holding-surface distribution. The anchor is compact and fits in most common anchor lockers and bow rollers. Other sizes on request.

From €199.00 *

WING anchor stainless steel

WING anchor stainless steel

Robust welded stainless steel construction, industrial polish.The WING anchor is a combination plow and danforth anchor. It unites good setting ability with light handling.Because of its low center of gravity and self-righting design, the WING anchor sets quickly and holds well.

€169.00 *

WING anchor

The WING anchor is a combination between plough- and Danforth anchor. It combines good holding with ease of use. It's low center of gravity and self-righting geometry means that the WING anchor grabs quickly and holds well. Welded, galvanized steel.

From €110.00 *

HERRESHOFF dinghy anchor

HERRESHOFF dinghy anchor

Small HERRESHOFF anchor made of forged bronze.The anchor can be taken apart in a few simple steps and is then extremely easy to stow.The flukes become wide and sharp at their ends for good holding.Comes in a handmade sailcloth bag.

€105.00 *

M-anchor galvanized

M-anchor galvanized

The M-anchor is a replica of the well-known BRUCE anchor, combined with the advantages of plow and danforth anchors.The basic design is based on the anchors employed to secure the oil platforms in the North Sea.This anchor sets quickly and deeply and holds well, even in swells.M-anchors work well in bow rollers.Cast as a single piece, hot-dip galvanized cast steel.

From €39.90 *

M-anchor stainless steel

M-anchor stainless steel

The M-anchor is a replica of the well-known BRUCE anchor, combined with the advantages of plow and danforth anchors.The basic design is based on the anchors employed to secure the oil platforms in the North Sea.This anchor sets quickly and deeply and holds well, even in swells.M-anchors work well in bow rollers.Cast as a single piece, industrial polished stainless steel (AISI 316).

From €156.00 *

VULCAN anchor by ROCNA

VULCAN anchor by ROCNA

The galvanized VULCAN anchor is an evolution of the ROCNA anchor.It has the same quality characteristics (high holding power as well as fast and reliable digging in), but it is more compact and the special profile of the anchor shaft, as well as the omission of a roll-bar (since not necessary with this construction), make an advantageous design for anchor holders on the stem head or the bathing platform. In addition to the use of high tensile steel, shank strength is optimised by a unique "I + V profile" shank design, granting improved resistance to bending courtesy of a computer optimised I-beam geometry. This visually elegant innovation also improves setting performance, with the lower "V" edge cutting into the seabed and minimizing resistance to a deep and secure digging in. Breaking from the ROCNA design, the VULCAN features an unique combination of shank and fluke geometry - including an innovative "roll-palm" which self-rights the anchor on the seabed without the use of a roll-bar. This is assisted by the "V-bulb" which extends fluke ballast downward to gain maximum leverage and efficiency. The concave fluke is similar in design to the ROCNA anchor, directly equating to more holding power and security. There are fixing eyes for safety and rescue lines, as well as for a tandem anchor.

From €399.00 *

HALL anchor, hot dipped steel

HALL anchor, hot dipped steel

Traditional weight anchor which nicely fits in the hawsehole.Beautiful shape, massive shaft.Made from cast steel.Up to 75kg, hot-dip galvanized; 100kg and up, only available in black.Dimensions and weight may vary based on manufacturing conditions.Other sizes available on request.

From €169.00 *

Hot-dip galvanised patent anchor

Hot-dip galvanised patent anchor

A classic and also handy sized patent anchor for open motor launches and dinghies made from malleable iron.The anchor can easily be split into two parts by sliding out the shaft and fits into any locker seat.Alternatively it can be carried in the hawse pipe.

From €54.50 *

Bow Anchor

Proven universal anchor without moving parts, approved as HHP anchor (high holding force anchor) according to GL. Welded construction made of St37 steel hot-dip galvanized. Suitable as main anchor for all anchor grounds, fast and safe tie-in of the anchor due to the roll bar.Developed by the inventor Rolf Kaczirek and optimized together with the DGzRS (a german rescue society). After patent expiration only a replica from China is available. The dimensions may vary.

From €87.00 *

BRIC anchor

An inexpensive replica of the well-known BRITANY anchors.Unites all of the benefits of danforth anchors in its complex construction:Best holding on all bottoms for its light weight.Welded construction, hot-dip galvanized.

From €22.00 *

FAST anchor

Preiswerter Leichtgewichtsanker mit guter Haltekraft.Der breite Stock mit Endkugeln verhindert das Verkanten und sorgt für sicheres Eingraben der Flunken.Feuerverzinkte Schweißkonstruktion.

From €59.80 *

ULTRA MARINE Anchor stainless steel

ULTRA MARINE Anchor stainless steel

The ULTRA-anchor, made from DUPLEX High-strength stainless steel (AISI 316L) stands out through high strength and optimal holding power on every seabed. The special design, the hollow shank and a lead filled tip amount to perfect weight distribution, and ensure fast and easy penetration into the ground. The hand polished surface protects from corrosion and prevents sand and mud from sticking to the anchor. Every anchor is handmade in europe. Classified as a SHHP-anchor (Super High Holding Power).

From €794.00 *

Fisherman anchor foldable

Fisherman anchor foldable

Made from hot-dip galvanized cast iron, with foldable flukes and stock.Import quality.Comes with galvanized shackle.The weight may vary by as much as 10 percent.

From €58.00 *

Fisherman anchor hot dip galvanised

Fisherman anchor hot dip galvanised

The father of all anchors.All-round anchor with fixed flukes and collapsible pole.Neatly welded design, hot-dip galvanised.Dimensions, weight and colour may vary depending on the manufacturer and production process.The 100 kg anchor is painted black.

From €287.00 *

LEWMAR C-Q-R NEW STYLE plough anchor hot-dip galvanised

LEWMAR C-Q-R NEW STYLE plough anchor hot-dip galvanised

The trusted C-Q-R anchor has been completely reworked and optimised by LEWMAR.With reinforced stock and a stronger hinge the anchor now is weight optimised with a larger sized fluke made as a pure welded construction from steel (material number 1.0143).The new C-Q-R anchor NEW STYLE is certified by Lloyds as an anchor with high holding power (HHP) also.The very good corrosion protection is achieved through the use of a sound hot galvanisation.The anchor has a shackle with large eye for a tripping line (weighting line) welded-on.

From €283.00 *

Plough anchor

Cast-iron shaft and middle of the plow. Welded leaves. All hot-dip galvanized.Slight dimension deviations are possible.

From €69.00 *

Anchor

Robust welded construction in hot-dip galvanized design, similar in form and dimensions to D'Hone anchors.Well suited for hawse holes.

From €114.00 *

Grapnel folding anchor

Grapnel folding anchor

A well-known universal anchor that can be quickly cleared and when folded requires little space.Ideal for dinghies, daysailers and other light boats.These anchors have exceptionally wide flukes and a thickened shaft for better holding.An inexpensive anchor! Hot-dip galvanized.Used primarily with chain leaders.

From €18.90 *

Grapnel folding anchor

Grapnel folding anchor

The classic folding anchor, well-known universal anchor that can be quickly cleared and when folded requires little space.Ideal for dinghies, daysailers and other light boats.An inexpensive anchor! Hot-dip galvanized.Comes with galvanized shackle.Used primarily with chain leaders.

From €75.00 *

Request sent successfully

Request wasn't send - a error occured. Please try again.