Quality brass shackle, normal short design, made in France.Each shackle is marked with the working load limit (WLL) and size. The working load is 1/5 of the breaking load.Bail material: CuZb37.Nuts material: CuZn4Pb3.
A4 stainless steel chain swivel (AISI 316).Design: shackle/shackle with hexagon sockets (a model shackle/eye provides the article no. 1758-105).This swivel is particularly well suited for anchors, because it has no pins to worry about.
Forged stainless steel shackle with hexagon socket pin. Straight design. Particlarly well suited for connecting anchor and chain.European brand-name product, made from stainless steel 1.4404 (AISI316L). Forged shackles follow the molecular structure lines of force, differing from, for example, cast shackles, so that it is possible to set the same strength for every forged part! For application in areas where safety is critical, the use of forged articles is highly recommended.As is true of all forged stainless steel pieces, they will not break suddenly, but will deform first. This is an important safety feature because it allows easy detection of overloading.To be on the safe side, only use stainless steel shackles at 1/4 of the given breaking load (BRL).Only use shackles with a given safe working load (SWL) for lifting heavy loads.
Galvanized swivel for general use, imported from the Far East. The nominal size D corresponds to the recommended chain diameter. Design: eye/eye. Working load limit = 1/5 breaking load (BRL)
Quality shackle, long design with a large opening. Made in France by MAILLON RAPID. Every shackle is marked with its working load and size. The breaking load is 5 times the working load. Material: A4 stainless steel, 1.4404 (AISI 316L).
High-strength swivel shackle (anchor-chain connector), made from A4 stainless steel (AISI 316L) by the manufacturer WASI.The ball link absorbs even sideways pulls on the anchor shaft without jamming. The breaking strength is up to 300% that of the matching chain.Tested and certified by Germanisher Lloyd (GL).
The chain coupler typ BL is recommended as a large end link for the AQUA7 high strength anchor chain and other high strength couplings. Made of high strength special steel (grade 8), painted yellow. WLL=0.25 BRL. Replacement bolts and locking pins are available.
High-strength grade 7 shackle, well suited as an end link for AQUA7 hardened and tempered anchor chain. The slim shape prevents snagging in the anchor roller. The bolt is secured with threadlocking adhesive. High-quality corrosion protection due to COROLIM hot-dip galvanizing. WLL = 1/4 of BRL.
The chain connector was developed by the stainless steel chain specialist KETTEN WÄLDER and has the corresponding breaking load of the matching DUPLEX anchor chain.Manufactured in Germany from high-strength and corrosion-resistant DUPLEX stainless steel 1.4462 (AISI318LN).The special design aligns the anchor during hoisting and ensures good adaptation to the anchor roller. Smooth-running ball head swivel. The chain and anchor are each attached with a screwed bolt (hexagon socket).Further sizes in preparation.
Quality chain connectors, to be inserted between the anchor shaft and the chain. Made by KONG / ITALY, certified by RINA. Made of stainless steel (AISI316).With swivel. Comes with fitting hex-wrench.
Quality brass shackle, oval design with large opening, made in France.Every shackle is marked with its working load and size. The breaking load is 5 times the working load.Bail material: CuZb37Nuts: CuZn4Pb3.
Quality chain connector that can be installed between the anchor shaft and the chain.Made by KONG in Italy. Certified by RINA.Carbon steel, forged and hot-dip galvanized.Design without swivel. Comes with fitting hex-wrench.
Welded from high-tensile stainless steel HR 1.4542 (AISI 630) by the French quality manufacturer WICHARD. These swivels exhibit extraordinair breaking loads (BRL) and guarantied working loads (WL).Model with large eye & small eye and in the size 7 mm also with ball bearing available. The large swivel eye is practical for 2 lines or for an especially large shackle in order to connect an anchor with a swivel respectively.
Welded from high-tensile stainless steel HR 1.4542 (AISI 630) by the French quality manufacturer WICHARD. These swivel shackles exhibit extraordinair breaking loads (BRL) and guarantied working loads (WL).Model yaw & yaw with hexagon socket (In6K).
Welded from high-tensile stainless steel HR 1.4542 (AISI 630) by the French quality manufacturer WICHARD. These swivel shackles exhibit extraordinair breaking loads (BRL) and guarantied working loads (WL). Model yaw & eye with hexagon socket (In6K) pin or alternatively available with splint.
Forged emergency chain link made of galvanized steel.The chain link is inserted between two pieces of chain and riveted. It is really only used as an emergency link and is not suitable for a permanent chain connection, as the breaking load is only about 50% of the chain strength.
