To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Oil cooker REFLEKS 71M

Oil cooker REFLEKS 71M

€1,145.00*

€1,145.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

output (kW)

1,6

B (mm)

250

H (mm)

230

T (mm)

250

weight (kg)

8,50

Stk

A small stove of rust-free stainless steel with a ground cast iron cooking pate (D=188 mm).
The stove has two pin brackets that hold pots when at sea.

Modell 71 M.

Total heat output: 1.6 kW (1400 kcal/h)
Fuel consumption: min. 0.12 l/h
Fuel consumption: max. 0.36 l/h
Weight: approx. 8.5 kg
For room sizes of approx. 14 - 23 m.sq.

REFLEKS ships' ovens and stoves have been developed specially for shipping. They and their accessories are made of rust-free stainless steel; in exhaust areas, acid-proof stainless steel.
The burner shells are made of precision steel.

All stoves are equipped with a proven ship's fuel regulator, that ensures the trouble-free function of the stove at heeling angles of up to 15°C and a high level of reliability.
More than 100,000 REFLEKS stoves have proven themselves worldwide for decades aboard fishing and other vessels in Scandinavia. They require no electrical connection, are easy to install, work totally odor-free and give off a cozy warmth.

Extensive installation and use instructions are included.

more information

📖 View article in the TOPLICHT catalogue

Art. No.	output (kW)	B (mm)	H (mm)	T (mm)	weight (kg)	Price (unit)	Delivery time	Note list	Buy

Downloads

A small stove of rust-free stainless steel with a ground cast iron cooking pate (D=188 mm).
The stove has two pin brackets that hold pots when at sea.

Modell 71 M.

Total heat output: 1.6 kW (1400 kcal/h)
Fuel consumption: min. 0.12 l/h
Fuel consumption: max. 0.36 l/h
Weight: approx. 8.5 kg
For room sizes of approx. 14 - 23 m.sq.

REFLEKS ships' ovens and stoves have been developed specially for shipping. They and their accessories are made of rust-free stainless steel; in exhaust areas, acid-proof stainless steel.
The burner shells are made of precision steel.

All stoves are equipped with a proven ship's fuel regulator, that ensures the trouble-free function of the stove at heeling angles of up to 15°C and a high level of reliability.
More than 100,000 REFLEKS stoves have proven themselves worldwide for decades aboard fishing and other vessels in Scandinavia. They require no electrical connection, are easy to install, work totally odor-free and give off a cozy warmth.

Extensive installation and use instructions are included.

Questions about the product?

Accessories

DICKINSON flue tube cover

DICKINSON flue tube cover

Exhaust hood for DICKINSON stove pipes.Rain-proof standard hood, made of stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €227.00 *

DICKINSON exhaust hood

DICKINSON exhaust hood

Exhaust hood for DICKINSON stove pipes.H - shaped, for difficult ventilation situations.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €227.00 *

Flue pipes REFLEKS

Flue pipes REFLEKS

This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €29.90 *

Flue pipe elbow 45° REFLEKS

Flue pipe elbow 45° REFLEKS

This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €56.90 *

Flue pipe elbow 90° REFLEKS

Flue pipe elbow 90° REFLEKS

This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €61.00 *

Flue pipe elbow 90° REFLEKS with cleanout door

Flue pipe elbow 90° REFLEKS with cleanout door

This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €69.90 *

Flue gas damper REFLEKS

Flue gas damper REFLEKS

Pipe socket with draft flap for draw regulation and performance improvement of REFLEKS stoves.The exhaust ventilation is installed directly over the stove and when used automatically guides air into the exhaust guide pipe.Recommended for long or problematic exhaust leads.Length 330 mm.

From €133.00 *

Flue guard REFLEKS

Flue guard REFLEKS

Guard for flue pipes that are installed in close quaters.Avaiable in stainless steel, brass or copper plate.The risk of contact burns is minimized, but the warmth of the pipe can still be enjoyed.Matches REFLEKS flue pipes of 70 mm or 90 mm.The flue guard is attached to the flue pipe and fixed with two stainless steel brackets, which are included in the package.Distance from flue pipe, 15 mm.

From €109.00 *

Wall shade inox

Wall shade inox

Small reflector plate for heat protection behind flue pipes.Plate stainless steel.Measurements:50cm high, 15cm wide.Available as flat or recessed version.The flat plate must be mounted with spacers or insulation behind, the recessed plate can be mounted directly on the wall.

From €35.90 *

Wall mount for REFLEKS oil heaters 66 M/M-C

Wall mount for REFLEKS oil heaters 66 M/M-C

Wall bracket for REFLEKS ovens in the 66M series without hot water coil.This sturdy wall bracket is used to securely mount REFLEKS ovens from the 66M series on board. It enables self-supporting installation on a bulkhead and provides the necessary clearance to adjacent components. Wall mounting leaves the floor area free and easier to clean. The bracket is particularly suitable for installation in cramped ship interiors where floor mounting is not possible or not desired.The bracket is riveted to the stove body.

€69.80 *

Spare burner pot REFLEKS

Spare burner pot REFLEKS

It is possible, that a replacement becomes necessary after years of usage, since the burner chambers in all REFLEKS oil heater are made from steel plate.The chambers are shipped complete with welded infeed tube, with a stainless steel ring to direct the flame and in case of the small burners 66M, 71M and 62M also with the heater coil (catalyst) made from innox.With the larger burners the heater coil has to be ordered separately.Additional spare parts for the REFLEKS oil heaters not mentioned here, like burner base, new burner or heating coil are available on request.

From €217.00 *

Exhaust hood REFLEKS

Exhaust hood REFLEKS

Standard exhaust hoods REFLEKS.

From €131.00 *

Exhaust hood Yacht REFLEKS

Exhaust hood Yacht REFLEKS

Thin flue cap, type YACHT.The design of this cap ensures a very secure fit and a good draft.Rain-proof and very compact.The rounded edges keep lines from hooking on it.

From €165.00 *

H-exhaust hood REFLEKS

H-exhaust hood REFLEKS

The flue cap of the Danish fishermen.The cap offers the most safe adjustment and is exceptionally secure against down drafts.Fits the double-walled flue pipes.

From €209.00 *

Insulating plate REFLEKS

Insulating plate REFLEKS

Thermal insulation of the deck from below.Large, round plate of polished stainless steel with insulating material.

From €46.00 *

Dress ring REFLEKS

Dress ring REFLEKS

Decorative screen to cover deck through hulls from below.Small, round plate of polished stainless steel.

From €26.90 *

Cap for through-hull REFLEX

Cap for through-hull REFLEX

Closing cap, stainless steel. Suitable for all REFLEKS flue pipes.

From €48.00 *

Deck ducts square REFLEKS

Deck ducts square REFLEKS

Deck through hull of stainless steel.With square deck plate.

From €115.50 *

Deck through hull REFLEKS

Deck through hull REFLEKS

Deck through hull with round deck plate, stainless steel. Suitable for our REFLEKS flue pipes.

From €128.00 *

Through hull inclined REFLEKS

Through hull inclined REFLEKS

Through-deck fitting with round, inclined deck plate.Made of stainless steel.Avaialable in various angles for adapting to the deck inclination.Fits the REFLEKS flue pipes.

From €149.00 *

Deck through hull REFLEKS components

Deck through hull REFLEKS components

Components for mounting a through-deck fitting that matches your deck inclination perfectly.Pipe, a round deck plate and flange to weld locally.Made of stainless steel.Fits the REFLEKS flue pipes.

From €98.00 *

Insulated flue pipe REFLEKS

Insulated flue pipe REFLEKS

Thickness 0.6 mm, insulated with 10 mm of rock wool.Above all, at the lowest temperatures, double flue pipes are necessary outside, so that the draft through very cold pipes can be restricted.

From €156.00 *

Insulated flue pipe elbow 45° REFLEKS

Insulated flue pipe elbow 45° REFLEKS

Thickness 0.6 mm, insulated with 10 mm of rock wool.Above all, at the lowest temperatures, double flue pipes are necessary outside, so that the draft through very cold pipes can be restricted.

From €168.00 *

Insulated flue pipe elbow 90° REFLEKS

Insulated flue pipe elbow 90° REFLEKS

Thickness 0.6 mm, insulated with 10 mm of rock wool.Above all, at the lowest temperatures, double flue pipes are necessary outside, so that the draft through very cold pipes can be restricted.

From €168.00 *

Insulated flue pipe adapter REFLEKS

Insulated flue pipe adapter REFLEKS

Required for double-walled flue pipes, in order to mount an exhaust hood that fits the inner diameter.

From €59.90 *

Burner coil for REFLEKS oilheater 66/71

Burner coil for REFLEKS oilheater 66/71

Combustion chamber application with catalysing function; for improving the combustion process, especially at low regulation.All new REFLEKS stoves come equipped with these coils.

€76.00 *

Oil drip tray REFLEKS

Oil drip tray REFLEKS

Base plate for all REFLEKS stoves.Very highly recommended for safe installation. Because of its high edge, it will collect leaked fuel.

From €110.00 *

Oil metering regulator REFLEKS

Oil metering regulator REFLEKS

By REFLEKS especially for their different stoves pre aligned oil metering valves by the swiss manufacturer TOBY.The oil metering valves are equipped with an attached safety valve with a fusible cut-out for the automatic cut-off when the stove is overheating above 100°C. Fitting tubing: copper tube with D = 8 mm;Inlet and overflow pipe: compression type fitting,Outlet: flare type fitting.The TOBY oil metering valve DVR 5 is a time-tested single compartment controller for oil stoves, that operates with the gasification technique. The controller serves to regulate the amount of oil flowing and thereby the heating output. At the same time it acts as the safety valve for the stove.Since the CC oil metering valves used by REFLEKS before 2012 are not produced any more, a change to the TOBY oil metering valve became necessary.

From €398.00 *

Fuel pipe connection for TOBY controller

Fuel pipe connection for TOBY controller

Fuel pipe connection for 8 mm pipe diameter.Melting cap for TOBY oil metering valves for automatic closing in the event of a fire.

€62.90 *

Temperature safety valve

Temperature safety valve

All REFLEKS heating systems with a water circuit should be equipped with this shut-off valve.The KBB fire protection valve is a compact valve in a corrosion-resistant, non-flammable design that operates purely mechanically and does not require a power supply.The temperature sensor is connected to the valve via a permanently soldered capillary line.As soon as the temperature at the sensor exceeds the set value (90°), the oil supply to the stove is immediately interrupted by the valve.The valve remains closed until the reset button is pressed.The valve can also be triggered manually by pulling the reset button.The valve (supplied with connection material for 8 mm pipes, SR 8 mm cutting ring fitting on both sides) is installed in the oil supply line directly upstream of the regulator.The temperature sensor measures the flow hot water temperature near the heater. If the set temperature (90°C) is exceeded, the oil supply is shut off immediately.To connect the sensor to the heating pipework, use a copper T-piece with two G ½" male threaded pipe fittings (please order item no. 4292-100 separately). The vertical branch of the T-piece does not have direct access to the water circuit of the heating system, but is soldered onto the water-carrying pipe and serves to accommodate the temperature sensor.Care must be taken during installation to ensure that the capillary line is not kinked under any circumstances. Length of the sensor line 200 cm.

From €99.80 *

Rotary ventilator ASPIROMATIC stainless steel

Rotary ventilator ASPIROMATIC stainless steel

Rotating stainless steel vent that can also be used as a gas vent for all opening types, protected against backdrafts and supports the correct draft of the chimney.The (folding) extraction fan runs on ball bearings and is propelled by the wind.The flange is made of a light DURAL-INOX alloy. Available is also a version 240 C with a square ground plate (330 x 330mm) for profiles of 200 x 200mm up to 250 x 250mm. The enclosed attachment bolts allow mounting on pipes of varying diameters.Output data based on 3 beaufort wind velocity (10 kn).

From €298.00 *

REFLEKS-adapter for ASPIROMATIC ventilator

REFLEKS-adapter for ASPIROMATIC ventilator

Fits the REFLEKS 90 mm flue pipe system, in order to attach the small ASPIROMATIC ventilator (Art-Nr. 1836-160). Stainless steel, 1 mm wall thickness. Diameter 95 / 150 mm, height 95 mm.

€107.00 *

Last seen products

More articles from this category

DICKINSON BRISTOL oill stove

DICKINSON BRISTOL oill stove

Solid and proven diesel stove for cooking, baking and heating.Required exhaust accessories: 4" / 100 mm (see accessories).Complete equipment:Fuel regulator,Ceramic-lined combustion chamber,Cast-iron cooking plates with rim and pot holders,Baking grid and plate lifter,Window into the combustion chamber,Opening oven door with integrated thermometer,12 volt support ventilator - also available for 24 volt systems.Optional built-in stainless steel spiral (d = 16 mm) to produce hot water (Boiler).Output: min. 1,9 kW, max. 4,8 kW.Consumption: min. 0,2 l/h, max. 0,6 l/h.DICKINSON ship's stoves of Canada, made since 1932. Originally conceptualized for fishermen and professional mariners, these stoves stand out for their simple, but well-thought-out, design and solid construction. All stoves are, as far as is possible, made of stainless steel. The stove plates are made of ground cast iron.Functionality: All stoves work on the simple shell-burner principle. They can be used with either diesel or heating oil. The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with natural filling serving as regulator. If no tank can be integrated, the use of an electric fuel pump is also possible. The installable regulator - developed and made by DICKINSON - keeps the correct fuel feed to the burner shell and, using a float switch, ensures the feed, in case the flame goes out unnoticed.Reliable functionality, because it runs without failure-prone electronics and electrical systems. The regulator has a safety shutdown integrated in the adjustment knob that breaks the fuel flow if the temperature remains over 75°C. The stoves work very quietly and give off a comfortable, dry warmth!To support the burning - exceptionally when lighting the stove or in difficult circumstances - the adjustable ventilator under that burner shell can be set.For optimal burning, all stoves come equipped with a removable superheater.

From €2,389.00 *

DICHINSON PACIFIC oill stove

DICHINSON PACIFIC oill stove

Solid, proven diesel stove for cooking, baking and heating.Required exhaust accessories: 5" / 127 mm (see accessories).Completely equipped:Fuel regulator,Ceramic-lined combustion chamber,Cast-iron cooking plates with rim and pot holders,Baking grid and plate lifter,Window into the combustion chamber,Opening oven door with integrated thermometer,Support ventilator (variable speed) - available for 12 volt or 24 volt systems.Optional built-in stainless steel coil (D = 16 mm) to produce hot water (in a separate boiler which is not included). Output: min. 1,9 kW, max. 4,8 kW.Consumption: min. 0,2 l/h, max. 0,6 l/h.Please request the complete DICKINSON brochure (INFO Nr. 47).Shipment without cookware.DICKINSON ship's stoves of Canada, made since 1932. Originally conceptualized for fishermen and professional mariners, these stoves stand out for their simple, but well-thought-out, design and solid construction. All stoves are, as far as is possible, made of stainless steel. The stove plates are made of ground cast iron.Functionality: All stoves work on the simple shell-burner principle. They can be used with either diesel or heating oil. The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with natural filling serving as regulator. If no tank can be integrated, the use of an electric fuel pump is also possible. The installable regulator - developed and made by DICKINSON - keeps the correct fuel feed to the burner shell and, using a float switch, ensures the feed, in case the flame goes out unnoticed.Reliable functionality, because it runs without failure-prone electronics and electrical systems. The regulator has a safety shutdown integrated in the adjustment knob that breaks the fuel flow when the temperature remains over 75°C. The stoves work very quietly and give off a comfortable, dry warmth!To support the burning - exceptionally when lighting the stove or in difficult circumstances - the adjustable ventilator under that burner shell can be set.For optimal burning, all stoves come equipped with a removable superheater.

From €2,650.00 *

DICKINSON LOFOTEN oil stove

DICKINSON LOFOTEN oil stove

Combination model suitable for heating and cooking. The rectangular cabin oven has a height of just 455 mm and, with its compact dimensions of 275 x 435 mm (width x depth), also fits into a small niche.As is usual with DICKINSON, the stove is made entirely of stainless steel, with a black burnished perforated plate fitted around the perimeter to protect against contact and scuffing.Required exhaust accessories: 4" / 102 mm (see accessories & spare parts).The diesel oil regulator is easily accessible at the front of the stove.A viewing window allows the flame to be checked from the outside.The stove quickly reaches operating temperature thanks to the built-in support fan; the switch and speed regulator are located in a box that can be mounted separately.The stove is equipped with the tried and tested 6" airflow burner.Heat output and oil consumption (min/max): 1.9/4.75 kW - 0.24/0.6 l/h.Weight of the stove: 11 kg.The exhaust outlet leaves enough space for a kettle or a pot on the removable cast iron hotplate.DICKINSON marine oil stoves and ovens from Canada, built since 1932. Originally designed for fishing and commercial shipping, all stoves are characterized by a simple but well thought-out design and solid construction. All stoves are, as far as possible, made of stainless steel. The hotplates are made of surface-ground cast iron.How they work: All ovens work according to the simple principle of the bowl burner. Either diesel oil or heating oil can be used. The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with a natural gradient to the stove regulator. If no tank can be installed, it is also possible to use an electric oil feed pump. The adjustable oil regulator - developed and manufactured by DICKINSON - regulates the correct oil supply to the burner bowl and ensures a safety shutdown via a float if the flame should go out unintentionally.Reliable operation, as there are no electrical or electronic components that are susceptible to faults. The regulator has a safety cut-out integrated into the control knob, which permanently interrupts the oil supply at temperatures above 75°C. The stoves work very quietly and give off a pleasant, dry heat!To support combustion - especially when lighting the stove or in difficult draught conditions - the adjustable fan under the burner bowl can be switched on. For optimum combustion, all stoves are equipped with a removable flame catalyst ("superheater").

From €1,559.00 *

Oil cooker REFLEKS 70M

Oil cooker REFLEKS 70M

Two-plate stove of stainless steel, comes with or without surrounding rim.One cooking plate is heated by an underlying burner pot; the other is heated by the exceptional internal flame guide.The stove is isolated, so that the heat is only given off over the heating plates.Model 70 M. Total heat output: 1.6 KW (1400 kcal/h) Fuel consumption: min. 0.12 l/h Fuel consumption: max. 0.36 l/hREFLEKS ships' ovens and stoves have been developed specially for shipping. They and their accessories are made of rust-free stainless steel; in exhaust areas, acid-proof stainless steel.The burner shells are made of precision steel.All stoves are equipped with a proven ship's fuel regulator, that ensures the trouble-free function of the stove at heeling angles of up to 15°C and a high level of reliability.More than 100,000 REFLEKS stoves have proven themselves worldwide for decades aboard fishing and other vessels in Scandinavia. They require no electrical connection, are easy to install, work totally odor-free and give off a cozy warmth. Extensive installation and instruction manuals are included.

€2,409.00 *

Oil cooker REFLEKS 71M

Oil cooker REFLEKS 71M

A small stove of rust-free stainless steel with a ground cast iron cooking pate (D=188 mm).The stove has two pin brackets that hold pots when at sea.Modell 71 M. Total heat output: 1.6 kW (1400 kcal/h) Fuel consumption: min. 0.12 l/h Fuel consumption: max. 0.36 l/h Weight: approx. 8.5 kg For room sizes of approx. 14 - 23 m.sq.REFLEKS ships' ovens and stoves have been developed specially for shipping. They and their accessories are made of rust-free stainless steel; in exhaust areas, acid-proof stainless steel.The burner shells are made of precision steel.All stoves are equipped with a proven ship's fuel regulator, that ensures the trouble-free function of the stove at heeling angles of up to 15°C and a high level of reliability.More than 100,000 REFLEKS stoves have proven themselves worldwide for decades aboard fishing and other vessels in Scandinavia. They require no electrical connection, are easy to install, work totally odor-free and give off a cozy warmth. Extensive installation and use instructions are included.

€1,145.00 *

Request sent successfully

Request wasn't send - a error occured. Please try again.