Current transformer for LED lamps

Rope cable

3-wire cable (3 x 0.75 sq.mm), round braided with hemp-colored synthetic rope, well suited for hanging lamps.

€6.90 *

Details

Bulb BaY15d tube form 230 v

Sphere bulb. BaY15d socket, 230 V, 25 W, (40 cd).

€14.50 *

Details

Bulb for navigation light P28s-socket 24 v

Bulb for navigation light / postion lantern with P28s socket for 24 volts.Please note: The bulb is part of the approval of navigation light. If an incandescent lamp without approval is used as replacement, the approval of the complete lantern expires. Therefore, it only makes sense to have approved bulbs on board as a reserve.Our marine light bulbs come from Danlamp, Peters & Bey or the RADIUM brand. They have the required approval (type examination by the BSH - Federal Maritime and Hydrographic Agency).

€17.30 *

Details

Bulb for navigation light BaY15d 12 v / 24 v

Bulb for navigation light / postion lantern with bayonet socket BaY15d. Optionally for 12 or 24 volts.For vessels under 20 m: stern and anchor light require 10 W, all other lanterns 25 W.Please note: The bulb is part of the approval of navigation light. If an incandescent lamp without approval is used as replacement, the approval of the complete lantern expires. Therefore, it only makes sense to have approved bulbs on board as a reserve.Our marine light bulbs come from Danlamp, Peters & Bey or the RADIUM brand. They have the required approval (type examination by the BSH - Bundesamt für Seeschifffahrt und Hydrographie).

From €12.00 *

Details

Bulb for navigation light P28s-socket 230 v

Tubular bulb, Diameter = 38 mm, Length = 108 mm. Socket P28s, 65 W, 230 V.

€16.30 *

Details

Bulb B22d 24 volt or 230 v

Tubular navigation bulb. B22 socket. Two types (for 24V or 230V)

From €15.50 *

Details

LED BaY15d 10-30 v

This LED modul is equipped with 30 bright LEDs.It fits in the BaY15d socket of navigation lights. It can replace the classic navigation bulbs.Consumption is only 3 W, 350 lm, 3000K. This LED lamp is not approved for the use in navigation lights!Bulb socket BaY15d.For 10 - 30 volt.

€20.90 *

Details

Bulbs for SEALED-BEAM searchlights DHR

Spare bulb SEALED-BEAM for spreader lights from GENERAL ELECTRIC.Specially suitable for DHR searchlights.

From €131.00 *

Details

LED Bulbs for searchlights DHR

The DHR150-series searchlight is a Classic. Introduced in the 60's it has been a popular fixture in the recreational boating ever since. Thanks to the evolvement of LED technology, DHR decided to develop a drop-in PAR46 LED replacement for the 150-series. No special modifications are needed for installation. The existing wiring can be connected to the LED-insert - without the need for extra tooling. Compared to the 100-250 Watt incandescent equivalent, it boosts a luminous intensity of 200.000 Candela (measured) using only 10 W of energy. A performance guaranteed over a voltage range of 10 - 32 VDC. Additionally, DHR selected a unique optical design to realize a clear focused spot, while keeping stray light to a minimum. An extreme narrow bundle makes the 150 LED-replacement the best performing compact marine searchlights of its class. Direct replacement the following GE Sealed beam lamps: PAR46 Sealed beam GE4537-2 PAR46 Sealed beam GE4553

From €379.00 *

Details

Glass chimneys for SÖRENSEN lamps

Spare glass chimney for SHIP's-Lamp (chromed) and PASSENGER-Lamp from SÖRENSEN.

From €35.00 *

Details

Transformer 230/240V to 12V / 35-105W

With this quality transformer, 12 V DC electric lights can be attached to 230/240 V AC systems.Safety transformer for the EU: - Input voltage 230/240 V, 50/60 Hz -Output voltage 11.6 V, 35 - 105 Watt.-- two outputs, two lamps can be connected Dimmable (for phase and reverse phase control dimmer).Protected against short circuits.Comes without plug.

€24.50 *

Details

Glass chimney for SÖRENSEN-SHIP-Lamp II

Spare chimney for SHIP's-Lamp II made by SÖRENSEN.

€35.00 *

Details

Current transformer for LED lamps

Electronic power transformer for LED lamps.In: 250V, Out: direct current (DC) 12V.

€39.90 *

Details

Accessories for DINNER candle lamp

We offer the following accessories for our dinner lamps:

From €34.00 *

Details

Cover ring for PREBIT lights

Cover ring as spare part for PREBIT lights with a ground plate of D= 55 mm.Gold plated or chromed version available to cover old screw holes, D= 92 mm.

From €33.00 *

Details

PREBIT dimmer switch module LD-200

The control module LD-200 to separately dim the PREBIT LED-lights (main and secondary) of the EB 12-3 and D1-3 series.A separate push button switch is required.

€72.50 *

Details

VESTA glass globe

Classic matte-glass shade for perfect light output. The real diameter (D1) is always a little bit smaller as the stated. Available colours: Opal white or green (interior white).

From €41.00 *

Details

Electric "burner" for paraffin lamps

Allows the conversion of paraffin lamps to work on electrical systems of 12, 24 or 230 volts.Fits a VESTA glass shade or a cardboard shade.Cord entrance on the side of the burner. Connection cable length approx. 180 cm, with rocker switch and plug.E14 socket. Comes without bulb.

From €80.00 *

Details

Spare lamp glass for ELLIPSE light DELITE

Spare lamp glass for the light ELLIPSE by DELITE. Here we offer only the spare lamp glass. The entire lamp shown in the photo is not included.We regret the ELLIPSE lamp is no longer available.

From €39.00 *

Details

Spare parts for CABIN lamps

The manufacturer CABIN offers a good range of spare parts for its quality lights:Switch for retrofitting, the set includes one brass-colored and one chrome-colored switch cover each.brass knurled screw for the original CABIN wall light.G4 socket for CABIN wall lights.G4 socket for CABIN chart table lamps.

From €14.50 *

Details

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm