Go to homepage
€0.00*
Jobs
Catalogue
Quick order
Filter products now
from 0 € to 5998 €
from 0 L to 50 L
from 45 mm to 703 mm
from 50 cm to 50 cm
from 150 mm to 1000 mm
from 1 Zoll to 8 Zoll
from 83 g to 1430 g
from 0 kg to 88 kg
from 15 mm to 58 mm
Filter products now

Stoves & heaters

The boating season can be extended with a suitable boat heating system, and many watercraft or houseboat can be used and inhabited all year round. Various types of traditional ship stoves and ship heaters have proven themselves in operation at sea and in port. A diesel or oil-fired stove with a shell burner should have a fuel tank placed at least 30 cm higher than the stove. Due to gravity, the fuel is transported to the burner without using a circulating pump. These type of stove is equipped with a proven ship's fuel regulator, ensuring the trouble-free …

Read more

178 products
Pipe clip nylon
Pipe clip nylon
Pipe clip nylon, suitable for copper fuel pipes.

€0.65 *
Details
BLUE paraffin
BLUE paraffin
BLUE is a clear, odorless naphthene paraffin, without any additional perfumes.Ideally suited for stoves, lamps and heaters.Advantages: In paraffin cookers or heaters no clogging of the nozzle, in lamps it provides carbon-free burning.Naphten paraffin may also be used to remove rust and for cleaning purposes.

From €9.95 *
Details
BLUE paraffin
BLUE paraffin
BLUE paraffin
Box of storm matches
Box of storm matches
Box of storm matches with approx. 20 pieces.

€2.80 *
Details
Box of storm matches
Box of storm matches
Fuel pipe connectors
Fuel pipe connectors
Brass compression fitting for 8mm tube.

From €1.20 *
Details
Fuel pipe connectors
Fuel pipe connectors
Fuel pipe connectors
Fuel pipe connectors
Fuel pipe connectors
Fuel pipe connectors
Fuel pipe connectors
Fuel pipe connectors
Fuel pipe connectors
Fuel pipe connectors
Fuel pipe connectors
Fuel pipe connectors
Copper fuel pipe / gas pipe
Copper fuel pipe / gas pipe
Relaxed, bendable copper pipe for simple installation.Outer diameter 8 mm.

€13.95 *
Details
Pipe clip stainless steel
Pipe clip stainless steel
Pipe clip niro, suitable for copper fuel pipes.

€2.10 *
Details
White spirit or oil can
White spirit or oil can
Transparent plastic bottle with screw-on cover and securable brass spout. This bottle can be used in various areas onboard: - As an alcohol container, it is indispensable for lighting paraffin stoves and diesel or paraffin heaters. - Excellent also as an oil can, in order to target difficult to reach places for lubrication.

€11.50 *
Details
Oil heater decoker RUSSFREI
Oil heater decoker RUSSFREI
Soot pads for the periodic cleaning of the burner pot.Content 5 pieces.

€4.35 *
Details
Circulation pump LAING ECOCIRK D5 VARIO 8-24V
Circulation pump LAING ECOCIRK D5 VARIO 8-24V
Quality circulation pump, with shaftless DC ball motor and minimal energy draw through permanent magnet technology.This pump stands out for its compact dimensions, high efficiency, very low power draw and long life.Because it doesn't use conventional bearings, the pump is quiet and maintenance-free.Brass body with 1/2" inner threads, for water temperature < 95°C.The speed is adjustable to control feed.0,25 - 1,9A.For systems of 8 to 24 volt.Continuous running is possible.A plastic mount bracket must be ordered separately.

From €295.95 *
Details
Circulation pump LAING ECOCIRK D5 VARIO 8-24V
Circulation pump LAING ECOCIRK D5 VARIO 8-24V
Flue pipes REFLEKS
Flue pipes REFLEKS
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €29.90 *
Details
Oil heater starter FLAMMAUF
Oil heater starter FLAMMAUF
Oil heater starter - spill. Waxed paper fuse.Packages of 100.

€2.65 *
Details
Carbon monoxide alarm KIDDE X10-D.2
Carbon monoxide alarm KIDDE X10-D.2
Carbon monoxide detectors from KIDDE, the world's leading manufacturer of smoke and CO detectors for the home.  With state-of-the-art, certified sensor technology in accordance with EN 50291:2010, an integrated 10-year power supply and a 10-year manufacturer's guarantee, KIDDE offers maximum safety in the event of carbon monoxide leaks.In the case of heating appliances that run on wood, coal, heating oil or gas, CO can escape into the room air if they are insufficiently maintained, improperly installed or if the flue is blocked. The life-threatening gas cannot be seen, smelled or tasted!The CO detector from KIDDE warns you with a loud alarm signal if carbon monoxide escapes. The alarm is triggered in relation to the measured CO concentration in the room air (in accordance with EN50291). This means: timely warning of CO concentrations that can lead to unconsciousness and death within a short time. Additional safety is provided by the X10-D model, which shows a CO concentration in the room air from 30 ppm on a digital display. A peak value memory ensures that a CO leak is reliably displayed even after a long period of absence

€55.90 *
Details
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
The small SALAMANDER SE cast iron stove has been specially developed for small rooms. It can be used to burn logs, coal or eco-briquettes. Its heat output is 4 kW.The SALAMANDER SE solid fuel stove is available in two versions: a standard version and a version with a separate fresh air supply.The models with fresh air supply have an integrated air box at the rear of the stove, to which a flexible stainless steel air supply hose (diameter: 80 mm) is connected. This hose has a variable length of 300 mm to 1250 mm (extended).In addition to the supply air hose, the scope of delivery also includes all the necessary installation materials such as hose clips and an external cover.The efficiency of the stoves is a very good 81.4 percent. The low particulate and gas emissions comply with the European ECO DESIGN regulations and even fall below the new, stricter limit values of the HETAS Cleaner Choice Scheme. This means that the SALAMANDER SE can be operated in the so-called "smoke-free zones" in the UK. The HETAS Cleaner Choice Scheme is designed to help improve air quality in the UK through strict limits on smoke emissions and particulate matter.The user-friendly air regulator on the front of the stove allows the secondary and tertiary air supply to be precisely adjusted. The firing rate and flame pattern can therefore be controlled very precisely. The preheated tertiary air inlet also ensures efficient, clean combustion. The secondary combustion technology keeps the large viewing window clean.Installation is possible not only on board ships, but also in construction trailers or mobile tiny houses.The exhaust pipe connection has an internal diameter of 4" (100 mm) and a slightly conical external diameter of 115 mm. This means that pipes with an outer diameter of 100 mm can be inserted into the flange or pipes with an inner diameter of 115 mm can be attached.We offer an adapter for our REFLEKS stainless steel pipes of size 114 mm so that the entire REFLEKS exhaust pipe system can be used.Accessories:4356-100: Stove substructure to raise the stove by 158 mm, which also creates space for firewood.4356-101: Flue flange 90° allows the flue system to be installed at the back of the stove instead of the top.4356-103: Vermiculite plates can be replaced with the side cast-iron heat storage plates in the SALAMANDER SE.The SALAMANDER SE is supplied with cast iron heat storage plates as standard. Compared to cast iron plates, the firebox with vermiculite plates heats up much faster due to its insulating properties, which increases the efficiency of the stove.4356-108: Removable hotplate, increases the thermal mass of the SALAMANDER stove by 7 kg . The plate considerably increases the cooking surface.It can only be used if the flue gas pipe system is fitted to the rear of the stove.4356-109 4356-110: Heat protection, sturdy steel construction to shield the hot stove from surrounding walls and furniture. When using the SALAMANDER stove with base frame, the high heat protection must be used.The heat protection is supplied in four parts and is quick and easy to install.4282-115: Flue pipe adapter, for REFLEKS stainless steel pipes size 114 mm.4356-210 4356-211 Brass fittings conversion kitSpare parts:These items are supplied with every stove, but are also available as replacements.4356-104: Glass pane as a spare part if the pane in the stove is damaged and needs to be replaced.4356-105: Multitool, tool for operating the hot stove. The shaking grate, air control, ash drawer and doors can be operated without burning your fingers.4356-106 Sweeper and shovel for cleaning the oven.4356-107 Door lock

From €1,015.00 *
Details
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
4356-003 Feststoffofen SALAMANDER SE mit Frischluftzuführung
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Feststoffofen SALAMANDER SE liegend, Hebel zur Luftregulierung
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Solid fuel stove SALAMANDER SE
Burner coil for REFLEKS oilheater 66/71
Burner coil for REFLEKS oilheater 66/71
Combustion chamber application with catalysing function; for improving the combustion process, especially at low regulation.All new REFLEKS stoves come equipped with these coils.

€76.00 *
Details
Flue pipe elbow 90° REFLEKS
Flue pipe elbow 90° REFLEKS
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €61.00 *
Details
Flue pipe elbow 90° REFLEKS
Flue pipe elbow 90° REFLEKS
Wall shade inox
Wall shade inox
Small reflector plate for heat protection behind flue pipes.Plate stainless steel.Measurements:50cm high, 15cm wide.Available as flat or recessed version.The flat plate must be mounted with spacers or insulation behind, the recessed plate can be mounted directly on the wall.

From €35.90 *
Details
Wall shade inox
Wall shade inox
Wall shade inox
Insulated flue pipe REFLEKS
Insulated flue pipe REFLEKS
Thickness 0.6 mm, insulated with 10 mm of rock wool.Above all, at the lowest temperatures, double flue pipes are necessary outside, so that the draft through very cold pipes can be restricted.

From €156.00 *
Details
Insulated flue pipe REFLEKS
Insulated flue pipe REFLEKS
Insulated flue pipe REFLEKS
Insulation hose
Insulation hose
To insulate the exhaust pipes we offer tubes made from a highly heat resistant aramid aluminium fabric.Material thickness approx. 1,4 mm, approx. 500 g/m², enduring up to 1000°C radiant heat.

From €62.70 *
Details
Cap for through-hull REFLEX
Cap for through-hull REFLEX
Closing cap, stainless steel. Suitable for all REFLEKS flue pipes.

From €48.00 *
Details
Rotary ventilator ASPIROMATIC stainless steel
Rotary ventilator ASPIROMATIC stainless steel
Rotating stainless steel vent that can also be used as a gas vent for all opening types, protected against backdrafts and supports the correct draft of the chimney.The (folding) extraction fan runs on ball bearings and is propelled by the wind.The flange is made of a light DURAL-INOX alloy. Available is also a version 240 C with a square ground plate (330 x 330mm) for profiles of 200 x 200mm up to 250 x 250mm. The enclosed attachment bolts allow mounting on pipes of varying diameters.Output data based on 3 beaufort wind velocity (10 kn).

From €298.00 *
Details
Rotary ventilator ASPIROMATIC stainless steel
Rotary ventilator ASPIROMATIC stainless steel
Rotary ventilator ASPIROMATIC stainless steel
Rotary ventilator ASPIROMATIC stainless steel
Rotary ventilator ASPIROMATIC stainless steel
Rotary ventilator ASPIROMATIC stainless steel
Rotary ventilator ASPIROMATIC stainless steel
Rotary ventilator ASPIROMATIC stainless steel
Burner coil for REFLEKS oil heater 62
Burner coil for REFLEKS oil heater 62
Combustion chamber application with catalysing function; for improving the combustion process, especially at low regulation.All new REFLEKS stoves of the series 62 come equipped with this burner coil.

€99.00 *
Details
Burner coil for REFLEKS oil heater 60/61
Burner coil for REFLEKS oil heater 60/61
Combustion chamber application with catalysing function; for improving the combustion process, especially at low regulation.All new REFLEKS stoves, exept stoves 60/61, are equipped with these coils.

€99.00 *
Details
Flue pipe adapter
Flue pipe adapter
The flue accessory from the REFLEKS range may be used on DICKINSON stoves.To use the REFLEKS flue pipe, we offer an adapter that must be replaced on DICKINSON stoves.

From €61.90 *
Details
Flue pipe elbow 45° REFLEKS
Flue pipe elbow 45° REFLEKS
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €56.90 *
Details
Flue pipe elbow 45° REFLEKS
Flue pipe elbow 45° REFLEKS
… function of the stove at heeling angles of up to 15° and a high level of reliability. A circulation pump and additional copper heating coils make it possible to heat radiators and water heaters similar to a ship's central heating system. Also common on yachts are diesel-powered air heaters, with warm air being circulated by an electric blower. Other options for heating a sailing or motor vessel are petroleum stoves, wood stoves and coal stoves. A solid fuel stove for boats is usually made of steel or cast iron. Similar to a wood-burning stove, it has a door with an observation window for watching the oven fire. There is a wide range of products - contact us for advice on which on-board heating system is suitable for your ship.