Skip to main content


Downloads

Small wall-mounted stove with bowl burner principle:
The diesel oil (heating oil) flows from the vat tank through a copper pipe to the stove.
The heat output is set manually at the so-called "drip regulator"; the fuel supply must be readjusted during operation.
The exhaust gases, and thus also the moisture in the cabin, are led outside through the exhaust pipe (diameter 56 mm).

Supplied ready for installation with
3 pieces of 460 mm exhaust pipe,
deck duct,
exhaust hood,
7-liter stainless steel gravity tank with level indicator (or 12V electric pump, a 24 V DC conversion resistor is included)
Automatic ignition fuse and
copper piping.

Available versions: Completely made of stainless steel or stainless steel with brass front.
Both versions are also available in a version without a retractable tank, but with a 12 V electric pump (a 24 V DC conversion resistor is included in the scope of delivery) and a connection pipe to the diesel tank.

Dimensions of the reeled tank: 180 x 340 x 290 mm (DxLxH).

Heating capacity 2.0 kW, fuel consumption max. approx. 0.25 l/h.

Similar products

Exhaust Hood HTD5166 for TAYLOR'S 079D
Exhaust hood for TAYLORS'S diesel stove 079D. The exhaust hood prevents wind and water from entering the exhaust pipe.In addition to the accessories and spare parts listed here, we can supply other important parts from stock or order them for you at the factory.

€229.00 *
Exhaust Hood HTD5405 for TAYLOR'S 079D
Exhaust hood for TAYLORS'S Diesel stove 079D. The H-shaped exhaust hood prevents wind and water from entering the exhaust pipe and ensures a particularly good exhaust due to the large openings.In addition to the accessories and spare parts listed here, we can supply other important parts from stock or order them for you at the factory.

Price on request
Deck Flange HTD5245 for TAYLOR'S 075D
Deck flange for passing the exhaust duct through the deck. The flange fits the TAYLOR'S petroleum heater 079D. In addition to the accessories and spare parts listed here, we can supply other important parts from stock or order them for you at the factory.

€179.00 *
Magnetic valve TAYLOR'S HTD5260
The TAYLOR oil-heater is equipped with this safety feature.The temperature sensor shuts the fuel supply off, if the flame dies.Also intended for retrofitting older stoves.

€76.00 *
Contact protection TAYLOR'S HTD5385
Accessories for TAYLOR'S oil heater.Additional to the parts mentioned here, all important spare parts are available from stock.We can order other parts directly from the manufacturer.Please be so free and order the detailed explosion chart or the manual as a copy.

From €156.00 *
Flue pipe TAYLOR'S HTD5232
3/16" copper line, connects drip unit to burner pot.Supplied with crimp sleeves (Ms olive for connection to the drip unit and Cu sleeve for burner pot connection).Over the years, the position of the solenoid valve and the drip unit has changed. On the older TAYLOR'S 079D stoves, the combination solenoid valve/drip unit was mounted about halfway up the casing; on the newer stoves, the parts are mounted at the very top of the casing, so that the pipe now has a length of about 30 cm. On the older models the pipe had a length of about 14 cm.Spare part for TAYLOR'S 079D diesel heaters.TAYLOR'S code HDT5232Handbook Code 16bAccessories for TAYLOR'S oil heater:Additional to the parts mentioned here, all important spare parts are available from stock.We can order other parts directly from the manufacturer.Please be so free and order the detailed explosion chart or the manual as a copy.

€34.90 *

Last seen products

More articles from this category

Oil Heater TAYLOR'S 079D with Drop Tank
Small wall-mounted stove with bowl burner principle: The diesel oil (heating oil) flows from the vat tank through a copper pipe to the stove.The heat output is set manually at the so-called "drip regulator"; the fuel supply must be readjusted during operation. The exhaust gases, and thus also the moisture in the cabin, are led outside through the exhaust pipe (diameter 56 mm). Supplied ready for installation with 3 pieces of 460 mm exhaust pipe, deck duct, exhaust hood, 7-liter stainless steel gravity tank with level indicator (or 12V electric pump, a 24 V DC conversion resistor is included)Automatic ignition fuse and copper piping. Available versions: Completely made of stainless steel or stainless steel with brass front.Both versions are also available in a version without a retractable tank, but with a 12 V electric pump (a 24 V DC conversion resistor is included in the scope of delivery) and a connection pipe to the diesel tank. Dimensions of the reeled tank: 180 x 340 x 290 mm (DxLxH).Heating capacity 2.0 kW, fuel consumption max. approx. 0.25 l/h.

From €2,998.00 *