Rotary ventilator ASPIROMATIC stainless steel | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Art. No.	model	version	tube size D (mm)	D1 (mm)	D2 (mm)	H (mm)	output	Price (unit)	Delivery time	Note list	Buy

Downloads

Rotating stainless steel vent that can also be used as a gas vent for all opening types, protected against backdrafts and supports the correct draft of the chimney.
The (folding) extraction fan runs on ball bearings and is propelled by the wind.
The flange is made of a light DURAL-INOX alloy.
Available is also a version 240 C with a square ground plate (330 x 330mm) for profiles of 200 x 200mm up to 250 x 250mm.

The enclosed attachment bolts allow mounting on pipes of varying diameters.

Output data based on 3 beaufort wind velocity (10 kn).

Questions about the product?

Accessories

REFLEKS-adapter for ASPIROMATIC ventilator

REFLEKS-adapter for ASPIROMATIC ventilator

Fits the REFLEKS 90 mm flue pipe system, in order to attach the small ASPIROMATIC ventilator (Art-Nr. 1836-160). Stainless steel, 1 mm wall thickness. Diameter 95 / 150 mm, height 95 mm.

€107.00 *

Similar products

Rotary ventilator ASPIROMATIC 100 aluminium

Rotary ventilator ASPIROMATIC 100 aluminium

Aluminium rotating vent, enamelled in dark grey or copper brown.Good throughput despite small dimensions makes it ideal for permanent ventilation onboard or at home.Smooth running, thanks to a vibration-free oil-bath housing,Not intended for combustion gases.Available in two colours: dark grey or copper brown.

From €168.00 *

Rotary ventilator VENTALU

Rotary ventilator VENTALU

This maintenance-free suction fan, which is powered by the wind according to the Flettner principle, achieves a very high air flow rate. It is rainproof and smooth running. Proven for over 35 years!Construction of aluminum sheet (1 mm thick) with stainless steel axle and two dust-proof, smooth-running ball bearings.The ventilation capacity is specified for a wind speed of 4.5 m/sec.An stick-on flange for flat roofs must be ordered separately.On request, this ventilator is also available with pipe sockets 125 mm or 200 mm.

From €36.90 *

Rotary ventilator

Rotary ventilator

Effective ventilator, made entirely of stainless steel, runs on double ball bearings.Rain-tight through its closed construction.

€439.00 *

Last seen products

More articles from this category

Cap for through-hull REFLEX

Cap for through-hull REFLEX

Closing cap, stainless steel. Suitable for all REFLEKS flue pipes.

From €48.00 *

Deck through hull REFLEKS components

Deck through hull REFLEKS components

Components for mounting a through-deck fitting that matches your deck inclination perfectly.Pipe, a round deck plate and flange to weld locally.Made of stainless steel.Fits the REFLEKS flue pipes.

From €98.00 *

Rotary ventilator ASPIROMATIC stainless steel

Rotary ventilator ASPIROMATIC stainless steel

Rotating stainless steel vent that can also be used as a gas vent for all opening types, protected against backdrafts and supports the correct draft of the chimney.The (folding) extraction fan runs on ball bearings and is propelled by the wind.The flange is made of a light DURAL-INOX alloy. Available is also a version 240 C with a square ground plate (330 x 330mm) for profiles of 200 x 200mm up to 250 x 250mm. The enclosed attachment bolts allow mounting on pipes of varying diameters.Output data based on 3 beaufort wind velocity (10 kn).

From €298.00 *

REFLEKS-adapter for ASPIROMATIC ventilator

REFLEKS-adapter for ASPIROMATIC ventilator

Fits the REFLEKS 90 mm flue pipe system, in order to attach the small ASPIROMATIC ventilator (Art-Nr. 1836-160). Stainless steel, 1 mm wall thickness. Diameter 95 / 150 mm, height 95 mm.

€107.00 *

Flue pipes REFLEKS

Flue pipes REFLEKS

This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €29.90 *

Flue pipe elbow 45° REFLEKS

Flue pipe elbow 45° REFLEKS

This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €56.90 *

Flue pipe elbow 90° REFLEKS

Flue pipe elbow 90° REFLEKS

This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €61.00 *

Flue pipe elbow 90° REFLEKS with cleanout door

Flue pipe elbow 90° REFLEKS with cleanout door

This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €69.90 *

Flue gas damper REFLEKS

Flue gas damper REFLEKS

Pipe socket with draft flap for draw regulation and performance improvement of REFLEKS stoves.The exhaust ventilation is installed directly over the stove and when used automatically guides air into the exhaust guide pipe.Recommended for long or problematic exhaust leads.Length 330 mm.

From €133.00 *

Flue guard REFLEKS

Flue guard REFLEKS

Guard for flue pipes that are installed in close quaters.Avaiable in stainless steel, brass or copper plate.The risk of contact burns is minimized, but the warmth of the pipe can still be enjoyed.Matches REFLEKS flue pipes of 70 mm or 90 mm.The flue guard is attached to the flue pipe and fixed with two stainless steel brackets, which are included in the package.Distance from flue pipe, 15 mm.

From €109.00 *

Wall shade inox

Wall shade inox

Small reflector plate for heat protection behind flue pipes.Plate stainless steel.Measurements:50cm high, 15cm wide.Available as flat or recessed version.The flat plate must be mounted with spacers or insulation behind, the recessed plate can be mounted directly on the wall.

From €35.90 *

Wall mount for REFLEKS oil heaters 66 M/M-C

Wall mount for REFLEKS oil heaters 66 M/M-C

Wall bracket for REFLEKS ovens in the 66M series without hot water coil.This sturdy wall bracket is used to securely mount REFLEKS ovens from the 66M series on board. It enables self-supporting installation on a bulkhead and provides the necessary clearance to adjacent components. Wall mounting leaves the floor area free and easier to clean. The bracket is particularly suitable for installation in cramped ship interiors where floor mounting is not possible or not desired.The bracket is riveted to the stove body.

€69.80 *

Spare burner pot REFLEKS

Spare burner pot REFLEKS

It is possible, that a replacement becomes necessary after years of usage, since the burner chambers in all REFLEKS oil heater are made from steel plate.The chambers are shipped complete with welded infeed tube, with a stainless steel ring to direct the flame and in case of the small burners 66M, 71M and 62M also with the heater coil (catalyst) made from innox.With the larger burners the heater coil has to be ordered separately.Additional spare parts for the REFLEKS oil heaters not mentioned here, like burner base, new burner or heating coil are available on request.

From €217.00 *

Exhaust hood REFLEKS

Exhaust hood REFLEKS

Standard exhaust hoods REFLEKS.

From €131.00 *

Exhaust hood Yacht REFLEKS

Exhaust hood Yacht REFLEKS

Thin flue cap, type YACHT.The design of this cap ensures a very secure fit and a good draft.Rain-proof and very compact.The rounded edges keep lines from hooking on it.

From €165.00 *

H-exhaust hood REFLEKS

H-exhaust hood REFLEKS

The flue cap of the Danish fishermen.The cap offers the most safe adjustment and is exceptionally secure against down drafts.Fits the double-walled flue pipes.

From €209.00 *

Insulating plate REFLEKS

Insulating plate REFLEKS

Thermal insulation of the deck from below.Large, round plate of polished stainless steel with insulating material.

From €46.00 *

Dress ring REFLEKS

Dress ring REFLEKS

Decorative screen to cover deck through hulls from below.Small, round plate of polished stainless steel.

From €26.90 *

Deck ducts square REFLEKS

Deck ducts square REFLEKS

Deck through hull of stainless steel.With square deck plate.

From €115.50 *

Deck through hull REFLEKS

Deck through hull REFLEKS

Deck through hull with round deck plate, stainless steel. Suitable for our REFLEKS flue pipes.

From €128.00 *

Request sent successfully

Request wasn't send - a error occured. Please try again.