Temperature safety valve
4319*02 Übertemperatur-Sicherheitsventil
4319*02 Übertemperatur-Sicherheitsventil
4319*02 Übertemperatur-Sicherheitsventil
4319*02 Übertemperatur-Sicherheitsventil
4319*02 Übertemperatur-Sicherheitsventil
Temperature safety valve
from €99.80*
€99.80*
Prices incl. VAT plus shipping costs
Available, delivery time: 1 Tag
In stock
All REFLEKS heating systems with a water circuit should be equipped with this shut-off valve.
The KBB fire protection valve is a compact valve in a corrosion-resistant, non-flammable design that operates purely mechanically and does not require a power supply.
The temperature sensor is connected to the valve via a permanently soldered capillary line.
As soon as the temperature at the sensor exceeds the set value (90°), the oil supply to the stove is immediately interrupted by the valve.
The valve remains closed until the reset button is pressed.
The valve can also be triggered manually by pulling the reset button.
The valve (supplied with connection material for 8 mm pipes, SR 8 mm cutting ring fitting on both sides) is installed in the oil supply line directly upstream of the regulator.
The temperature sensor measures the flow hot water temperature near the heater. If the set temperature (90°C) is exceeded, the oil supply is shut off immediately.
To connect the sensor to the heating pipework, use a copper T-piece with two G ½" male threaded pipe fittings (please order item no. 4292-100 separately). The vertical branch of the T-piece does not have direct access to the water circuit of the heating system, but is soldered onto the water-carrying pipe and serves to accommodate the temperature sensor.
Care must be taken during installation to ensure that the capillary line is not kinked under any circumstances. Length of the sensor line 200 cm.
All REFLEKS heating systems with a water circuit should be equipped with this shut-off valve.
The KBB fire protection valve is a compact valve in a corrosion-resistant, non-flammable design that operates purely mechanically and does not require a power supply.
The temperature sensor is connected to the valve via a permanently soldered capillary line.
As soon as the temperature at the sensor exceeds the set value (90°), the oil supply to the stove is immediately interrupted by the valve.
The valve remains closed until the reset button is pressed.
The valve can also be triggered manually by pulling the reset button.
The valve (supplied with connection material for 8 mm pipes, SR 8 mm cutting ring fitting on both sides) is installed in the oil supply line directly upstream of the regulator.
The temperature sensor measures the flow hot water temperature near the heater. If the set temperature (90°C) is exceeded, the oil supply is shut off immediately.
To connect the sensor to the heating pipework, use a copper T-piece with two G ½" male threaded pipe fittings (please order item no. 4292-100 separately). The vertical branch of the T-piece does not have direct access to the water circuit of the heating system, but is soldered onto the water-carrying pipe and serves to accommodate the temperature sensor.
Care must be taken during installation to ensure that the capillary line is not kinked under any circumstances. Length of the sensor line 200 cm.
Similar products
More articles from this category
