Flexible ribbed hose, D=60mm or D=75mm, for the warm air system of WALLAS heaters.The hose is connected to the intake connection of the heater for the fresh air intake and another hose is attached to the outlet connection of the heater for the transfer of the heated air.To put together the installation material for your heating system, you can also use the online support atwww.wallas.fi/accessories/

Further development of the proven WALLAS DT diesel hot-air heater, produced in Finland.Laminar flow burner technology and brushless radial fan ensure high warm air output with minimal noise emission, even without a silencer. Pleasant operation for the crew and freedom from disturbance for adjacent berths in the port.The future-oriented Greenboost burners are suitable for automotive diesel (EN 590) and fuels with a higher proportion of renewable fuels and guarantee low diesel consumption with low-emission combustion.Very low power consumption. Effective fresh air circulation for ventilation without heating is possible.Uncomplicated installation of the heaters in the engine room.Long service life, in corrosion-resistant metal housing, 3-year guarantee, worldwide service network. All devices are designed for 12 V on-board voltage.The heater is controlled via an external wired control panel with integrated room thermostat. Functions: stepless manual control, intelligent processor-controlled thermostat control, two-stage boost function, sun switch (switches off automatically on warm days), child lock, LED backlighting.With built-in fuel pump.For 12 V on-board voltage, 0.55-1.0 A .Two air inlets, two hot air outlets - each 75 mm in diameter.See table for dimensions. As the dimensions and connections correspond to the proven heaters of the WALLAS DT series, the replacement of old systems is extremely simple.Scope of delivery: heater, wall bracket with fixing screws, control panel (with 6.0 m connection cable), 4.0 m fuel line with filter, 4.0 m connection cable with 15 A fuse. Material for exhaust, supply and hot air installation is not included.Heating and on-board voltage can be controlled and monitored with the optional remote control type 4430 via SIM card using an app on a smartphone, tablet or PC.To put together the installation material for your heating system, you can also use the online support on the manufacturer's website:https://www.wallas.fi/accessories/units/22gb/index.php

Further development of the proven WALLAS DT diesel hot air heater, produced in Finland.Laminar flow burner technology and brushless radial fan ensure high warm air output with minimal noise emission, even without a silencer. Pleasant operation for the crew and freedom from disturbance for adjacent berths in the harbor.The future-oriented Greenboost burners are suitable for automotive diesel (EN 590) and fuels with a higher proportion of renewable fuels and guarantee low diesel consumption with low-emission combustion.Very low power consumption. Can also be started with very low on-board voltage (from 9.6 V). Effective fresh air circulation for ventilation without heating is possible.Uncomplicated installation of the heaters in the engine room.Long service life, in corrosion-resistant metal housing, 3-year warranty, worldwide service network. The heating is controlled via the wired Advanced control panel, which has Bluetooth and WLAN connectivity (wireless system update and control via smartphone app also possible). The separate wireless Bluetooth room thermostat (extremely simple and flexible installation, multiple thermostats possible) can be placed where the temperature is actually to be measured.Functions: stepless manual control, intelligent processor-controlled thermostat control, two-stage boost function, sun switch (switches off automatically on warm days), child lock, LED backlight.With built-in fuel pump.For 12 V on-board voltage, 0.5-2.2 A .Two air inlets, two hot air outlets D=75mm.See table for dimensions. As the dimensions and connections correspond to the proven heaters of the WALLAS DT series, the replacement of old systems is extremely simple.Scope of delivery: heater, wall bracket with fixing screws, control panel (with 6.0 m connection cable), 4.0 m fuel line with filter, 4.0 m connection cable with 15 A fuse. Material for flue gas, supply and hot air installation is not included.To assemble the installation material for your heating system, please also use the online support on the manufacturer's website: WALLASVIKING AIR installation accessories

New development from the Finnish heating specialist WALLAS: The combined air/water heater VIKING COMBI makes it possible to use 10% to 40% of the heating output to heat domestic hot water (with an optional external boiler), to operate external radiators or underfloor heating. Up to 90% of the heating output can be used to heat air.Laminar flow burner technology and brushless radial fan ensure high warm air output with minimal noise, even without a silencer. Pleasant operation for the crew and freedom from disturbance for adjacent berths in the port.The future-oriented Greenboost burners are suitable for automotive diesel (EN 590) and fuels with a higher proportion of renewable fuels and guarantee low diesel consumption with low-emission combustion.Very low power consumption. Can also be started with very low on-board voltage (from 9.6 V). Effective fresh air circulation for ventilation without heating is possible.Uncomplicated installation of the heaters in the engine room.Long service life, in corrosion-resistant metal housing, 3-year warranty, worldwide service network. The heating is controlled via the wired Advanced control panel, which has Bluetooth and WLAN connectivity (wireless system update and control via smartphone app also possible). The separate wireless Bluetooth room thermostat (extremely simple and flexible installation, multiple thermostats possible) can be placed where the temperature is actually to be measured.Functions: stepless manual control, intelligent processor-controlled thermostat control, two-stage boost function, sun switch (switches off automatically on warm days), child lock, LED backlight.With built-in fuel pump.For 12 V on-board voltage, 0.55-1.0 A .Two air inlets, one hot air outlet D=75mm, connections for water circuit D 19mm.See table for dimensions. As the dimensions and connections correspond to the proven heaters of the WALLAS DT series, replacing old systems is extremely easy.Scope of delivery: heater, wall bracket with fixing screws, control panel (with 6.0 m connection cable), 4.0 m fuel line with filter, 4.0 m connection cable with 15 A fuse.Material for flue gas, supply and hot air installation as well as circulation pump for the hot water circuit are not included.

Further development of the proven WALLAS DT diesel hot-air heater, produced in Finland.Heating output 1.4 - 4.5 kW. Three hot air outlets.Laminar flow burner technology and brushless radial fan ensure high warm air output with minimal noise, even without a silencer. Pleasant operation for the crew and freedom from disturbance for adjacent berths in the port.The future-oriented Greenboost burners are suitable for automotive diesel (EN 590) and fuels with a higher proportion of renewable fuels and guarantee low diesel consumption with low-emission combustion.Very low power consumption. Can also be started with very low on-board voltage (from 9.6 V). Effective fresh air circulation for ventilation without heating is possible.Uncomplicated installation of the heaters in the engine room.Long service life, in corrosion-resistant metal housing, 3-year warranty, worldwide service network. The heating is controlled via the wired Advanced control panel, which has Bluetooth and WLAN connectivity (wireless system update and control via smartphone app also possible). The separate wireless Bluetooth room thermostat (extremely simple and flexible installation, multiple thermostats possible) can be placed where the temperature is actually to be measured.Functions: stepless manual control, intelligent processor-controlled thermostat control, two-stage boost function, sun switch (switches off automatically on warm days), child lock, LED backlighting.With built-in fuel pump.For 12 V on-board voltage, 0.7-4.5 A .Three hot air outlets D=75mm.See table for dimensions. As the dimensions and connections correspond to the proven heaters of the WALLAS DT series, replacing old systems is very easy.Scope of delivery: heater, wall bracket with fixing screws, control panel (with 6.0 m connection cable), wireless Bluetooth room thermostat, 4.0 m fuel line with filter, 4.0 m connection cable with 15 A fuse. Material for flue gas, supply and hot air installation is not included.

Don’t let the memories of cold days keep you from boating. The Wallas 1300, a free-blowing (non-ducted) forced air kerosene heater, is ideal for heating one roomy cabin or a cockpit for your day trips on the water. This compact silent heater has everything you need in one body: a fuel pump, control switch, and warm air outlet grill, that can be positioned in your desired direction. Since it only needs an exhaust outlet, a connection to a battery, and some kerosene, it is quick and easy to installThe current consumption is only 0.4 A, which is perfect for small sail and motorboats. You can run the 1300 heater for over 100 hours with a regular 60 Ah battery. With the low fuel consumption of only 0.13 l/h (4.4 oz/hr), you don’t need a large tank for storage aboard.

Compact and energy-saving power pack. Replaces the previous 1800t and 2400t models.With improved temperature control and very low power consumption, a good choice for smaller boats, even in freezing cold conditions.Can run on just 0.4-0.7 amps of electricity and 0.10-0.20 litres of kerosene/hour. Easy-to-use thermostatic control panel that can be set to a target temperature or used in manual mode with two power settings - full power at 2000 W or half power at 900 W.Two hot air outlets with 60 mm diameter.Dimensions W x H x D: 364 x 260 x 126 mm.Weight 6.2 kg.