Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Radiator SPIROTECH

4317-349 Halterung für Rohrheizkörper SPIROTECH

from €71.00*

Content: 2

€31.00*

Content: 2 Stück (€15.50* / 1 Stück)

Prices incl. VAT plus shipping costs

Available, delivery time: 1 - 0 Tage

In stock

description
L (mm)
D (mm)
output (kW)
x

Tubular heating element, round design made of copper pipe with soldered heat mesh.
Core tube d = 15 mm.

A fitting mounting set (2pcs.) is available.

Show 3 articles
📖 View article in the TOPLICHT catalogue


Tubular heating element, round design made of copper pipe with soldered heat mesh.
Core tube d = 15 mm.

A fitting mounting set (2pcs.) is available.

Questions about the product?

Last seen products

More articles from this category

DICKINSON heat exchange heater
DICKINSON heat exchange heater
Practical heater, which ensures the circulation of warm air throughout the cabin. The RADEX heat exchanger is attached to the motor's coolant system or a DICKINSON oven. One (type I) or two (type II) fan blowers then circulate the warm air into the cabin with minimal power use (0.74 A per fan). The heating takes place through an internal heat exchanger (copper tubing 19 mm with aluminum plates). In type II the fans can be turned on separately.Air flow per fan is approx. 170 cubic meters per hour.Outer housing of brushed stainless steel.

From €437.00 *
Details
DICKINSON HEATEX transfer heater
DICKINSON HEATEX transfer heater
Heater with which radiant heat from the exhaust pipe system is diverted to other rooms.Instead of a 550 mm stove pipe, HEATEX is used in the pipe system. It consists of a 550mm tube jacketed by a heat exchanger. On the back there is a flange with which DICKINSON pipes or flexible exhaust hoses are connected to the fan. When the fan is switched on, the heat is sucked in through the connecting line and distributed in the room.The scope of delivery includes the heat exchanger, the fan (12 or 24 volts) and a pipe angle.All parts are made of stainless steel.

From €442.00 *
Details
Heat exchanger SILENCIO with 1 ventilator
Heat exchanger SILENCIO with 1 ventilator
The heat exchanger with one ventilator can be connected to the onboard heater or the cooling system of the engine and will heat the cabins with warm air. The device is equipped with an extremely quiet blower motor (48 dB) with very little electricity consumption and has an effective aluminium radiator.The heat exchanger is very easily mounted and can also be fitted in a bulkhead. Body and cover are made from black plastic with a rocker switch in the front panel. Features:Warm water tube connector: diameter 16 mm, thermal output 1,7 kW max.,air flow rate 110 m³/h,power consumption 0,6 / 0,3 A.

From €189.00 *
Details
Heat exchanger SILENCIO with 2 ventilators
Heat exchanger SILENCIO with 2 ventilators
The heat exchanger with two ventilators can be connected to the onboard heater or the cooling system of the engine and will heat the cabins with warm air. The device is equipped with an extremely quiet blower motor (48 dB) with very little electricity consumption and has an effective aluminium radiator.The heat exchanger is very easily mounted and can also be fitted in a bulkhead and comes without a switch. Body and cover are made from black plastic. Features:Warm water tube connector: diameter 16 mm, thermal output 5,5 kW max.,air flow rate 250 m?/h,power consumption 1,3 / 0,6 A.

From €189.00 *
Details
Radiator SPIROTECH
Radiator SPIROTECH
Tubular heating element, round design made of copper pipe with soldered heat mesh.Core tube d = 15 mm. A fitting mounting set (2pcs.) is available.

From €71.00 *
Details