Tiny stove with high energy efficency and low emission levels. The installation is possible not only on board of ships, but also as fire place in mobile Shepherd's Cabins or Tiny Houses (certificate EN13240:2001 + Amd 2:2004, DIN+, PD6434).Made of matte black painted plate steel. The firing chamber lined on the inside with oven bricks, thus even heat emission and good heat storage. The cast-iron door with heat-dissipating steel handle is equipped with an  specially effective locking mechanism and very precise air flow regulation. The large observation window is kept clean through the special airflow of the "airwash" system. Patented grate for all solid fuels. Galvanized ash tray.Maximum heat output: approx. 4,9 kW.For solid fuels like wood, briquette, pellets.A heat protection plate made of stainless steel is available as an accessory for the rear wall.An outdoor air kit made of stainless steel is also available as an option for installation in rooms with a limited supply of fresh air. A fresh air supply line with a diameter of 100 mm can be connected to the pipe flange of the outside air kit. The outside air kit is also a rear heat protection.The chimney exhaust with an inner diameter of 130 mm can be mounted either on top or rear side of the stove. The complete 5" exhaust system from DICKINSON may be used or a stovepipe adapter (see similar porducts) that fits the 130 mm exhaust pipes commonly used in Germany.Our HAMLET stoves are now available in various attractive colours.It is now possible to paint the stove housing in colours other than black.In the past, the colour of a newly installed stove had to be baked on for hours with the windows and doors open to remove unpleasant odours.Today, the colours of HAMLET stoves are already cured and ready to use, so there are no more unpleasant curing odours!The colours are also hard-wearing, durable, easy to clean and, of course, very temperature-resistant!In addition to the standard colour Midnight (black), 14 other colours are available.To order a coloured stove in the online shop, you must first add the desired stove to the shopping basket. Then select the item "Surcharge for stove colour" further down on the page (accessories and spare parts) and add the desired colour to the shopping basket.The coloured stoves are manufactured in the factory according to customer requirements and have a delivery time of 8-12 weeks. Shorter delivery times are possible for an additional charge.

This simple English stove of matte black cast iron fits well into small boats.The sensible air supply regulation and the refined exhaust system allow precise control of the heat.Filled from above.The HOT POT by DAVEY is an exceptionally functional work of art. Fittings and type plate are made from brass, polished or chromed surface (especially precious together with the stainless steel flue pipe). With internal grate and ash-shovel.Comes without feet. Hanging or installation must be done on an individual basis.Features:- Dimensions H x W x D: 408 x 160 x 260 mm,- Weight: 15 kg,- Chimney diameter: 69 mm,- Heat output: approx. 2 kW.70 mm REFLEKS-exhaust pipes and all its accessories are suitable. Please click "Similiar Products" below.Works with all solid fuels (wood, wood briquettes, pellets).Combusting chamber 100 x 130 x 220 mm.For logs of max. 70 x 70 x 150mm or wood briquettes of max. 80 x 80 x150 mm

The NEWPORT is a small solid fuel stove for wood, coal and charcoal.Its small installation dimensions and compact shape make it very suitable as a cabin stove.Stainless steel model with removable ash pan and adjustable stove flap.Suitable stove pipes in size 3" and other necessary accessories can be found here or further down on the page under "Accessories & spare parts".Make sure that the maximum wood load is not exceeded, otherwise the stove may be damaged.DICKINSON specifies the maximum amount of wood as 10 pieces 25 x 25 x 127 mm.

A special gem: The cast-iron stove type 1010 of the Danish stove foundry MORSOE modified by our Danish oil stove builder REFLEKS. The stove comes with a looping railing made of polished brass tube. The flame can be easily observed through the large disc (self-cleaning due to special airflow). The cast iron body and the fireclay coating of the combustion chamber ensure pleasant dry radiant heat. Suitable for wood and wood briquettes.Heat output max. 5.9 kW.Exhaust pipe outlet: ø 120 mm, optionally on top or at the back. The 114 pipe system from REFLEKS can be used.

The small SALAMANDER SE cast iron stove has been specially developed for small rooms. It can be used to burn logs, coal or eco-briquettes. Its heat output is 4 kW.The SALAMANDER SE solid fuel stove is available in two versions: a standard version and a version with a separate fresh air supply.The models with fresh air supply have an integrated air box at the rear of the stove, to which a flexible stainless steel air supply hose (diameter: 80 mm) is connected. This hose has a variable length of 300 mm to 1250 mm (extended).In addition to the supply air hose, the scope of delivery also includes all the necessary installation materials such as hose clips and an external cover.The efficiency of the stoves is a very good 81.4 percent. The low particulate and gas emissions comply with the European ECO DESIGN regulations and even fall below the new, stricter limit values of the HETAS Cleaner Choice Scheme. This means that the SALAMANDER SE can be operated in the so-called "smoke-free zones" in the UK. The HETAS Cleaner Choice Scheme is designed to help improve air quality in the UK through strict limits on smoke emissions and particulate matter.The user-friendly air regulator on the front of the stove allows the secondary and tertiary air supply to be precisely adjusted. The firing rate and flame pattern can therefore be controlled very precisely. The preheated tertiary air inlet also ensures efficient, clean combustion. The secondary combustion technology keeps the large viewing window clean.Installation is possible not only on board ships, but also in construction trailers or mobile tiny houses.The exhaust pipe connection has an internal diameter of 4" (100 mm) and a slightly conical external diameter of 115 mm. This means that pipes with an outer diameter of 100 mm can be inserted into the flange or pipes with an inner diameter of 115 mm can be attached.We offer an adapter for our REFLEKS stainless steel pipes of size 114 mm so that the entire REFLEKS exhaust pipe system can be used.Accessories:4356-100: Stove substructure to raise the stove by 158 mm, which also creates space for firewood.4356-101: Flue flange 90° allows the flue system to be installed at the back of the stove instead of the top.4356-103: Vermiculite plates can be replaced with the side cast-iron heat storage plates in the SALAMANDER SE.The SALAMANDER SE is supplied with cast iron heat storage plates as standard. Compared to cast iron plates, the firebox with vermiculite plates heats up much faster due to its insulating properties, which increases the efficiency of the stove.4356-108: Removable hotplate, increases the thermal mass of the SALAMANDER stove by 7 kg . The plate considerably increases the cooking surface.It can only be used if the flue gas pipe system is fitted to the rear of the stove.4356-109 4356-110: Heat protection, sturdy steel construction to shield the hot stove from surrounding walls and furniture. When using the SALAMANDER stove with base frame, the high heat protection must be used.The heat protection is supplied in four parts and is quick and easy to install.4282-115: Flue pipe adapter, for REFLEKS stainless steel pipes size 114 mm.4356-210 4356-211 Brass fittings conversion kitSpare parts:These items are supplied with every stove, but are also available as replacements.4356-104: Glass pane as a spare part if the pane in the stove is damaged and needs to be replaced.4356-105: Multitool, tool for operating the hot stove. The shaking grate, air control, ash drawer and doors can be operated without burning your fingers.4356-106 Sweeper and shovel for cleaning the oven.4356-107 Door lock

Tiny stove with high energy efficency and low emission levels. The installation is possible not only on board of ships, but also as fire place in mobile Shepherd's Cabins or Tiny Houses (certificate EN13240:2001 + Amd 2:2004, DIN+, PD6434).Made of matte black painted plate steel. The firing chamber lined on the inside with oven bricks, thus even heat emission and good heat storage. The cast-iron door with heat-dissipating steel handle is equipped with an  specially effective locking mechanism and very precise air flow regulation. The large observation window is kept clean through the special airflow of the "airwash" system. Patented grate for all solid fuels. Galvanized ash tray.Maximum heat output: approx. 4,9 kW.For solid fuels like wood, briquette, pellets.A heat protection plate made of stainless steel is available as an accessory for the rear wall.An outdoor air kit made of stainless steel is also available as an option for installation in rooms with a limited supply of fresh air. A fresh air supply line with a diameter of 100 mm can be connected to the pipe flange of the outside air kit. The outside air kit is also a rear heat protection.The chimney exhaust with an inner diameter of 130 mm can be mounted either on top or rear side of the stove. The complete 5" exhaust system from DICKINSON may be used or a stovepipe adapter (see similar porducts) that fits the 130 mm exhaust pipes commonly used in Germany.Our HAMLET stoves are now available in various attractive colours.It is now possible to paint the stove housing in colours other than black.In the past, the colour of a newly installed stove had to be baked on for hours with the windows and doors open to remove unpleasant odours.Today, the colours of HAMLET stoves are already cured and ready to use, so there are no more unpleasant curing odours!The colours are also hard-wearing, durable, easy to clean and, of course, very temperature-resistant!In addition to the standard colour Midnight (black), 14 other colours are available.To order a coloured stove in the online shop, you must first add the desired stove to the shopping basket. Then select the item "Surcharge for stove colour" further down on the page (accessories and spare parts) and add the desired colour to the shopping basket.The coloured stoves are manufactured in the factory according to customer requirements and have a delivery time of 8-12 weeks. Shorter delivery times are possible for an additional charge.

This simple English stove of matte black cast iron fits well into small boats.The sensible air supply regulation and the refined exhaust system allow precise control of the heat.Filled from above.The HOT POT by DAVEY is an exceptionally functional work of art. Fittings and type plate are made from brass, polished or chromed surface (especially precious together with the stainless steel flue pipe). With internal grate and ash-shovel.Comes without feet. Hanging or installation must be done on an individual basis.Features:- Dimensions H x W x D: 408 x 160 x 260 mm,- Weight: 15 kg,- Chimney diameter: 69 mm,- Heat output: approx. 2 kW.70 mm REFLEKS-exhaust pipes and all its accessories are suitable. Please click "Similiar Products" below.Works with all solid fuels (wood, wood briquettes, pellets).Combusting chamber 100 x 130 x 220 mm.For logs of max. 70 x 70 x 150mm or wood briquettes of max. 80 x 80 x150 mm

The NEWPORT is a small solid fuel stove for wood, coal and charcoal.Its small installation dimensions and compact shape make it very suitable as a cabin stove.Stainless steel model with removable ash pan and adjustable stove flap.Suitable stove pipes in size 3" and other necessary accessories can be found here or further down on the page under "Accessories & spare parts".Make sure that the maximum wood load is not exceeded, otherwise the stove may be damaged.DICKINSON specifies the maximum amount of wood as 10 pieces 25 x 25 x 127 mm.

A special gem: The cast-iron stove type 1010 of the Danish stove foundry MORSOE modified by our Danish oil stove builder REFLEKS. The stove comes with a looping railing made of polished brass tube. The flame can be easily observed through the large disc (self-cleaning due to special airflow). The cast iron body and the fireclay coating of the combustion chamber ensure pleasant dry radiant heat. Suitable for wood and wood briquettes.Heat output max. 5.9 kW.Exhaust pipe outlet: ø 120 mm, optionally on top or at the back. The 114 pipe system from REFLEKS can be used.

The small SALAMANDER SE cast iron stove has been specially developed for small rooms. It can be used to burn logs, coal or eco-briquettes. Its heat output is 4 kW.The SALAMANDER SE solid fuel stove is available in two versions: a standard version and a version with a separate fresh air supply.The models with fresh air supply have an integrated air box at the rear of the stove, to which a flexible stainless steel air supply hose (diameter: 80 mm) is connected. This hose has a variable length of 300 mm to 1250 mm (extended).In addition to the supply air hose, the scope of delivery also includes all the necessary installation materials such as hose clips and an external cover.The efficiency of the stoves is a very good 81.4 percent. The low particulate and gas emissions comply with the European ECO DESIGN regulations and even fall below the new, stricter limit values of the HETAS Cleaner Choice Scheme. This means that the SALAMANDER SE can be operated in the so-called "smoke-free zones" in the UK. The HETAS Cleaner Choice Scheme is designed to help improve air quality in the UK through strict limits on smoke emissions and particulate matter.The user-friendly air regulator on the front of the stove allows the secondary and tertiary air supply to be precisely adjusted. The firing rate and flame pattern can therefore be controlled very precisely. The preheated tertiary air inlet also ensures efficient, clean combustion. The secondary combustion technology keeps the large viewing window clean.Installation is possible not only on board ships, but also in construction trailers or mobile tiny houses.The exhaust pipe connection has an internal diameter of 4" (100 mm) and a slightly conical external diameter of 115 mm. This means that pipes with an outer diameter of 100 mm can be inserted into the flange or pipes with an inner diameter of 115 mm can be attached.We offer an adapter for our REFLEKS stainless steel pipes of size 114 mm so that the entire REFLEKS exhaust pipe system can be used.Accessories:4356-100: Stove substructure to raise the stove by 158 mm, which also creates space for firewood.4356-101: Flue flange 90° allows the flue system to be installed at the back of the stove instead of the top.4356-103: Vermiculite plates can be replaced with the side cast-iron heat storage plates in the SALAMANDER SE.The SALAMANDER SE is supplied with cast iron heat storage plates as standard. Compared to cast iron plates, the firebox with vermiculite plates heats up much faster due to its insulating properties, which increases the efficiency of the stove.4356-108: Removable hotplate, increases the thermal mass of the SALAMANDER stove by 7 kg . The plate considerably increases the cooking surface.It can only be used if the flue gas pipe system is fitted to the rear of the stove.4356-109 4356-110: Heat protection, sturdy steel construction to shield the hot stove from surrounding walls and furniture. When using the SALAMANDER stove with base frame, the high heat protection must be used.The heat protection is supplied in four parts and is quick and easy to install.4282-115: Flue pipe adapter, for REFLEKS stainless steel pipes size 114 mm.4356-210 4356-211 Brass fittings conversion kitSpare parts:These items are supplied with every stove, but are also available as replacements.4356-104: Glass pane as a spare part if the pane in the stove is damaged and needs to be replaced.4356-105: Multitool, tool for operating the hot stove. The shaking grate, air control, ash drawer and doors can be operated without burning your fingers.4356-106 Sweeper and shovel for cleaning the oven.4356-107 Door lock