Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Bronze goose neck

6242-180 Schwanenhals-Kabeldurchführung Rohr 38mm Bronze
6242*01 Schwanenhals aus Bronze

€299.00*

€299.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 - 0 Tage

In stock

D (mm)
D1 (mm)
D2 (mm)
B (mm)
H (mm)
weight (kg)
Stk
Strong, thick walled, very robust gooseneck.
May be used as cable fairlead or as ventilation.
Made from cast sturdy bronze,
tumbled with matte finish.
Show article
📖 View article in the TOPLICHT catalogue

Strong, thick walled, very robust gooseneck.
May be used as cable fairlead or as ventilation.
Made from cast sturdy bronze,
tumbled with matte finish.
Questions about the product?

Last seen products

More articles from this category

Cable outlet
Cable outlet
Brass cord through-hull, with rubber O-ring sealant.Available for various cord diameters.Polished or chromed brass finish.

From €9.81 *
Details
Cable outlet
Cable outlet
Watertight cord through-hull of stainless steel and chromed brass.The deck through-hull allows the plug to go through along with the cable, so that a seperation in the deck area is not necessary. Good solution for antenna and radar cables, for example.Comes complete with deck seal, screws and blind plug.

From €34.95 *
Details
Goose neck
Goose neck
Stainless-steel bent pipe for running cable.Welded-on footplate with 3 holes.

From €34.90 *
Details
Cable outlet QUICK
Cable outlet QUICK
Cable outlet made from plastic, resistant against corrosion, moisture and sea water.Utilising an O ring gasket seal this cable feed through functions as strain relief and at the same time as seal.

From €9.90 *
Details
Bronze goose neck
Bronze goose neck
Strong, thick walled, very robust gooseneck. May be used as cable fairlead or as ventilation.Made from cast sturdy bronze,tumbled with matte finish.

€299.00 *
Details
SCANSTRUT deck bushing plastic
SCANSTRUT deck bushing plastic
The SCANSTRUT deck bushing made of light grey plastic can be easily removed from the deck thanks to its low installation height. The cables can be routed watertight into the interior of the boat together with the fitted plug. The scope of delivery includes prefabricated seals for various cable diameters and a self-drilling seal for several cables or any cable diameter.

From €21.90 *
Details
SCANSTRUT deck bushing stainless steel
SCANSTRUT deck bushing stainless steel
The SCANSTRUT stainless steel deck bushing can be easily removed from the deck thanks to its low installation height. The cables can be routed watertight into the interior of the boat together with the mounted plug.The scope of delivery includes prefabricated seals for various cable diameters and a self-drilling seal for several cables or any cable diameter.

From €74.90 *
Details
Plastic dorade box for VETUS cowl vents
Plastic dorade box for VETUS cowl vents
The dorade boxes made of tough plastic drain off any water ingress via the cowl vents and can be sealed completely watertight using the integrated mushroom vent made of stainless steel (AISI 316). Suitable for corresponding VETUS cowl vent models made of silicone or stainless steel.Note: The boxes do not fit VETUS cowl vent models with a screw-on plastic ring which are named with the suffix "S" (SAMOEN-S/CHINOOK-S/LIBEC-S/TRAMON-S).The dorade boxes are supplied without cowl vents.

From €101.99 *
Details
Brass cowl vent heavy sand cast
Brass cowl vent heavy sand cast
Exceptionally heavy and thick-walled vent, made in a small casting workshop in northern Italy.Traditional nautical piece in a round or oval design with matte-polished finish.The sand-casting process by hand creates a finish that, with the production structure, leaves no visible holes, dents, or cavities.Included is a round deck flange (diameter = D3) onto which the vent can be screwed and which can be mounted with three strong knurled thumb screws.A vent that can outlive many a ship!

From €314.01 *
Details
Shell vent SCIROCCO
Shell vent SCIROCCO
Low-profile simple hood vent, made from stainless steel plate, for mounting on the deck or side of the hull.We recommend mounting it on a black plastic deck flange with sealant and a 75 mm gland.

From €10.90 *
Details
Brass shell vent AMERIKA polished or chromed
Brass shell vent AMERIKA polished or chromed
Low-profile hood vent, made from polished or chromed brass, for mounting on the hull.Available in two sizes.Mounting using three M6 threaded blind holes.

From €49.90 *
Details
Brass shell vent BERGAMO
Brass shell vent BERGAMO
Flat vent made from polished, cast brass.There are two M6 screw bolts and nuts supplied for mounting.Available surfaces are: highly polished brass and chrome.

From €44.90 *
Details
Bronze shell ventilator DAVEY 2467
Bronze shell ventilator DAVEY 2467
This vent, fashioned like a shell and made of polished bronze, screws into the deck.Can be mounted horizontally or vertically on deck or on the superstructure.A cross piece in the opening keeps spray and rainwater from flowing under the hood.

From €91.00 *
Details
Brass shell vent ISERLOHN
Brass shell vent ISERLOHN
Beautiful, heavy clam-shell vent. Traditionally sand-cast brass, with a high-gloss polish. Intended for horizontal or vertical mounting on deck or on superstructure. A straight cross piece in this design keeps all wetness from flowing under the hood.

From €139.00 *
Details
Bronze half cowl vent DAVEY
Bronze half cowl vent DAVEY
Polished bronze half-cowl vent to be screwed onto the sides of superstructure or wheel houses.Height 140 mm, opening 60 mm.

From €119.00 *
Details
Cowl vent bronze DAVEY DL2470
Cowl vent bronze DAVEY DL2470
Elegant, very robust wind scoop from the British manufacturer DAVEY. The vent is made of heavy cast bronze, cleanly hand-polished. Supplied complete with deck fitting, cover and bronze key.

From €798.00 *
Details
VETUS Cowl Vents Silicone
VETUS Cowl Vents Silicone
Popular and proven ventilation scoops made of durable white silicone rubber with red painted on the inside. The deck flanges and the screw rings are made of white hard plastic.The hoods can be rotated and removed by the screw ring.Silicone rubber is a very flexible synthetic material that can withstand temperatures between -100°C and + 200°C. It is resistant to UV light and does not discolor, so the cowl will always look like new.Product history:The LIBEC (Silikon) model replaces the older JERRY2 (PVC) model.The CHINOOk (Silikon) model replaces the older TOM2 (PVC) model.The SAMOEN (Silikon) model replaces the older YOGI2 (PVC) model.

From €69.90 *
Details
VETUS TAMON Cowl Vent Silicone
VETUS TAMON Cowl Vent Silicone
Popular and proven ventilation scoop made of durable white silicone rubber with red painted on the inside. The deck flange and the screw ring are made of white hard plastic.The hood can be rotated and removed by the screw ring.Silicone rubber is a very flexible synthetic material that can withstand temperatures between -100°C and + 200°C. It is resistant to UV light and does not discolor, so the cowl will always look like new.The TRAMON (silicone) model replaces the DONALD2 (PVC) model.Supplied without closure cap.

€65.00 *
Details
VETUS Stainless Steel Cowl Vents
VETUS Stainless Steel Cowl Vents
Popular and proven ventilation scoops made of A4 cast stainless steel. Painted red on the inside.Available in three different sizes as model JERRY, TOM or YOGI.A threaded ring, which is screwed to the deck, is used to attach the hood. The wind cap is screwed onto the threaded ring using the screw ring. The screw ring can be tightened or loosened using the supplied hook bracket in order to turn the cowl to any desired position and fix it there.A sealing cap is not included in the scope of delivery.To prevent water from entering the inside of the boat, it is recommended to mount the fan on a dorade box.

From €298.00 *
Details
VETUS stainless steel cowl vent DONALD
VETUS stainless steel cowl vent DONALD
Popular and proven ventilation scoops made of A4 cast stainless steel. Painted red on the inside.Modell DONALD.A threaded ring, which is screwed to the deck, is used to attach the hood. The wind cap is screwed onto the threaded ring using the screw ring. The screw ring can be tightened or loosened using the supplied hook bracket in order to turn the cowl to any desired position and fix it there.A sealing cap is not included in the scope of delivery.To prevent water from entering the inside of the boat, it is recommended to mount the fan on a dorade box.

€299.00 *
Details