Brass bull´s eye polished/chromed PLEXIGLAS (CE) 100x230mm | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Art. No.	version	D1 (mm)	D2 (mm)	D3 (mm)	S (mm)	weight (kg)	Price (unit)	Delivery time	Note list	Buy

Midweight design of brass or chromed brass with Plexiglas.
For installation from the inside, with soft rubber sealant.
Comes with a backing ring (outer ring).
Good seal thanks to adjustable hinge bolts and snap-in, adjustable toggle fastening.
These ports have a CE certification (Category A-D, Areas I, III and IV).

Thickness of glass: 6 mm,
40/50 mm ligament.
It's large thickness makes it well suited for all-wood walls.

Questions about the product?

Similar products

Brass bull's eye polished or chromed

Brass bull's eye polished or chromed

Mid-weight design of brass or chromed brass.Installed from inside, with soft-rubber seal. Comes compete with matching backing ring for the exterior. Good water-tightness through adjustable hinge bolts and snap-in, adjustable toggle locks.Because of its large depth, well suited to wood cabintops.Thickness of glass: 6 mm.

From €339.00 *

Last seen products

More articles from this category

Oval bronze opening portlights

Oval bronze opening portlights

Built from solid seawater-resistant cast bronze.All visible parts are hand polished.These opening ports can be screwed in from the inside and come complete with the appropriate outside finishing rings. Break-resistant, strengthened glass.CE certification is for use in the upper hull and cabin sides (Design category A through D, areas IIb, III, IV).Matching fixed ports, whose glass and total thickness are equal to those of these DAVEY ports, are also available.Thus it is possible to position opening and fixed ports next to each other without compromising appearance (See Article-No. 1039-...). Also available are fitting fly screens, where the form fits exactly to the shape of the ports.

From €770.00 *

Bronze oval portlight frame

Bronze oval portlight frame

Polished bronze portlight frames, oval design, drilled, without glass.

From €103.90 *

Round portlights bronze CE certified

Round portlights bronze CE certified

CE-certified portlights (bulls eyes), anufactured from solid seawater-resistant cast bronze. All visible surfaces are hand-polished. The glass is break-resistant and strengthened tempered.These opening ports can be screwed in from the inside and come complete with the appropriate outside finishing rings. The frames and finishing rings are pre-drilled and can be through-bolted or screwed into place.The matching DAVEY fixed ports (Article-No. 1036-...) are also available and have the same glass and total thickness. Thus it's possible to mount them next to each other without compromising appearance. (see similar products).These opening ports are CE certified (Design category A through D, areas II, III, IV).

From €76.80 *

Bronze portlights

Bronze portlights

CE-certified fixed portlights of medium strenght from the British manufacturer DAVEY.Molded from seawater-resistant bronze and hand-polished.Break-resistant, strengthened glass. Comes complete with the appropriate outside finishing rings. The frame and ring come pre-drilled.All visible parts are polished.It is possible to install fixed and opening ports (Article-No. 1035-...) next to each other without compromising appearance. These fixed ports are CE certified (Design category A through D, areas II, III, IV).

From €425.00 *

CE certified oval fixed bronze portlight

CE certified oval fixed bronze portlight

Manufactured from seawater-resistant cast bronze.All visible surfaces are hand-polished.Resistant strengthened glass.The windows come complete with the appropriate outside finishing rings.These fixed ports look like the opening ports Article-No. 1033-.... and can be installed in combination with them. CE certification (Design category A through D, areas IIb, III, IV).

From €432.00 *

Bronze portlight SPARTAN

Bronze portlight SPARTAN

Solid non-opening round port.Cast bronze frame, tumbled matt finish.The pane, made of hardened safety glass, is installed from the outside and sealed with silicone. Thus this port is also appropriate for horizontal applications because water cannot collect in the frame.The frame comes drilled with 5 mm countersunk fastener holes.Glass depth 5 mm.

From €256.00 *

Bronze bull's eye SPARTAN rectangular

Bronze bull's eye SPARTAN rectangular

High quality port of cast marine bronze.Tumbled matt finish. Classic rectangular shape.Opens. Locks with a strong bronze turning nuts.The ports are intended to be installed from the inside.Frame and outer ring are pre-drilled with countersunk holes D = 5 mm.Comes complete with matching outer ring.The large depth of the port allows installation in all-wood cabintops. The neoprene - soft rubber gasket - around the rim ensures a perfect seal.The hardened safety glass is sealed to the frame with silicone. Excellent detail: Drainage channels are built into the frame. Thus even when the ports are open, no saltwater can get in. All ports come complete with removeable bronze-coloured-plasic screens. Replacement parts for these quality ports, including seals, screws and bronze turning nuts, available.Made by the American traditional manufacturer SPARTAN.

From €975.00 *

Bronze bull's eye SPARTAN oval long

Bronze bull's eye SPARTAN oval long

Solid non-opening port.Classic long-oval shape.Cast bronze frame, tumbled matt finish.The pane, made of hardened safety glass, is installed from the outside and sealed with silicone. Thus this port is also appropriate for horizontal applications because water cannot collect in the frame.The frame comes drilled with 5 mm countersunk fastener holes.Glass depth 6 mm.Matches the long-oval opening ports from the American manufacturer SPARTAN.

€499.00 *

Bronze bull's eye SPARTAN

Bronze bull's eye SPARTAN

High quality port of cast marine bronze,tumbled matte finish.Clasic short-oval shape.The ports are intended to be installed from the inside.Frame and outer ring are pre-drilled with countersunk holes D = 5 mm.Comes complete with matching outer ring.The large depth of the port allows installation in all-wood cabintops. The neoprene - soft rubber gasket - around the rim ensures a perfect seal.The hardened safety glass is sealed to the frame with silicone. Excellent detail: Drainage channels are built into the frame. Thus even when the ports get opened, no saltwater can get in. All ports come complete with removeable bronze-coloured-plasic screens. Replacement parts for these quality ports, including seals, screws and bronze turning nuts, available. Matching are the oval fixed ports. Made by the American traditional manufacturer SPARTAN.

From €790.00 *

Brass bull's eye polished or chromed

Brass bull's eye polished or chromed

Mid-weight design of brass or chromed brass.Installed from inside, with soft-rubber seal. Comes compete with matching backing ring for the exterior. Good water-tightness through adjustable hinge bolts and snap-in, adjustable toggle locks.Because of its large depth, well suited to wood cabintops.Thickness of glass: 6 mm.

From €339.00 *

Brass bull's eye

Brass bull's eye

Small polished or chromed-brass port.Design comes with glass.Weight: approx. 1.7 kg.Shipment with backing ring and sleeve bolts.Also comes in a CE-certified design (CE-category A to D, areas I, III, IV) with Plexiglas.

From €229.00 *

Brass bull's eye

Brass bull's eye

Mid-weight quality to be installed from inside.Polished brass.Design comes with glass window. Comes compete with matching backing ring for the exterior and sleeve bolts. Available in two depths (S). CE-certified version with plexiglass available on request.

From €559.00 *

Brass rectangular bull's eye polished or chromed

Brass rectangular bull's eye polished or chromed

Light-quality port of brass or chromed brass to be installed from inside.Comes complete with matching outer ring, drilled.With soft-rubber seal.Comes with glass window.Weight: 5 kg.Also available in CE-certified (CE-category A to D, Areas I, III, IV) design with plexiglass (PMMA-Glass).

From €389.00 *

Brass bull's eye polished or chromed

Brass bull's eye polished or chromed

Portlights of (ellipsoidal) oval shape. Polished or chromed brass. Installation from outside.The frame for this port is installed in the cabintop from the outside, which gives it a smooth look.A good seal is achieved through the port's adjustable hinge bolts, as well as adjustable snap-in locking knobs.Comes complete with matching backing ring and sleeved screws.Ideally suited to cabintop thicknesses of about 18 mm.

From €239.00 *

Round opening portlights with perspex (CE)

Round opening portlights with perspex (CE)

Polished or chromed brass port, with a mounting depth of 50 mm.Comes ready for installation, with matching sleeve bolts and outer ring.Use: boatbuilding (only in protected areas of the boat, see CE certificate), decoration and interior building - not accredited for the outer hull of a seagoing boat.An inexpensive, but nevertheless functional port!Design with plexiglass (PMMA).CE certificate: category A to D, area III.

From €229.00 *

Brass bull´s eye polished or chromed PLEXIGLAS

Brass bull´s eye polished or chromed PLEXIGLAS

Round brass port, polished or chromed finish. Equipped with Plexiglas (PMMA glass).These ports are not only useful in boatbuilding - the Plexiglas design is CE certified - but also for many other applications in decoration and interior design.A simple and inexpensive port with high functionality.Comes ready to install and drilled, with matching backing ring for the outside.Spare parts, such as gaskets, bow nuts, etc., are available.CE certification: catagory A to D, area I, III, IV.

From €121.00 *

Brass portlight frames FORESTI

Brass portlight frames FORESTI

Polished brass porthole frames.With round, narrow design and drilled holes. FORESTI & SUARDI Coming from a crafts business, established in 1961, the north Italian brass foundry FORESTI &SUARDI Has become a modern industrial company that hasn't forgot about its traditional roots. Nowadays FORESTI manufactures all kinds of boat fittings, ship windows, sanitary accessories, interior fittings And especially a wide range of high quality lights for the use on ships but also on land.

From €26.00 *

Brass bull´s eye polsihed/chromed PLEXIGLAS (CE)

Brass bull´s eye polsihed/chromed PLEXIGLAS (CE)

Portlights of light design, made from polished or chromed brass.These ports come pre-drilled and ready to mount with outer ring and sleeved screws M4 x 16 mm, glass thickness 4 mm.Approximate weight 750 g.Comes with CE-certified Plexiglas (PMMA-glass)(Design Category A-D, Areas I, II, III, IV).Intended for use in boatbuilding (in protected areas of the boat), as decorative pieces and in the cabin.

From €98.00 *

Brass bull´s eye polished/chromed PLEXIGLAS (CE)

Brass bull´s eye polished/chromed PLEXIGLAS (CE)

Midweight design of brass or chromed brass with Plexiglas. For installation from the inside, with soft rubber sealant. Comes with a backing ring (outer ring). Good seal thanks to adjustable hinge bolts and snap-in, adjustable toggle fastening. These ports have a CE certification (Category A-D, Areas I, III and IV). Thickness of glass: 6 mm,40/50 mm ligament. It's large thickness makes it well suited for all-wood walls.

From €339.00 *

Brass bull´s eye polished/chromed PLEXIGLAS (CE)

Brass bull´s eye polished/chromed PLEXIGLAS (CE)

Small, polished or chromed porthole. Plexiglass design (with CE certification). Comes with sealing ring and concealed screws. Weight approx. 1.7 kg.

From €229.00 *

Request sent successfully

Request wasn't send - a error occured. Please try again.