To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Tool for removing impellers JABSCO

Tool for removing impellers JABSCO

from €99.00*

€99.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

description

for JABSCO BG:200/270

for JABSCO BG:020/040/080

impeller diam (mm)

ca 32 - 95

ca 65 - 150

B (mm)

140

H (mm)

165

weight (g)

450

Stk

An exceptionally practical tool for removing impellers
without damaging the pump housing.
Body and jaws of aluminum, shaft of stainless steel.
Dimensions, approx. 140 x 165 mm (W x H). Weight, 450 g.

more information

Show 2 articles

📖 View article in the TOPLICHT catalogue

Art. No.	description	impeller diam (mm)	B (mm)	H (mm)	weight (g)	Price (unit)	Delivery time	Note list	Buy

An exceptionally practical tool for removing impellers
without damaging the pump housing.
Body and jaws of aluminum, shaft of stainless steel.
Dimensions, approx. 140 x 165 mm (W x H). Weight, 450 g.

Questions about the product?

Last seen products

More articles from this category

Impeller Pump 220 Volt MARCO UP1/AC

Impeller Pump 220 Volt MARCO UP1/AC

Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber which allows the problem-free transit of small particles. Nickel-plated brass body, shaft in stainless steel. AISI 316L. Voltage: 230V-50Hz.Consumption: 3,3 A.Fuse: 4 A.Selfpriming up to 1,5 m height.Flow rate: 30l/min.Pressure: 1 bar.Ports: 1/2" Innengewinde (BSP) or hose diameter: 25 mm.Motorpower: 550 W.Weight: 7,3 kg.Also available for 12 volt or 24 volt. See under similar products.

€369.90 *

Impeller for impellerpump MARCO UP1

Impeller for impellerpump MARCO UP1

Impeller of special nitril rubber. Original spare part for UP1, UP1-M and UP1/AC MARCO Pumps.Dimensions hight x Ø: 22 x 51.5 mm.Bore Ø: 8 mm.

€32.90 *

Service kit for WHLALE GULPER 220/320

Service kit for WHLALE GULPER 220/320

Contents of service kit AK1550:MembraneValve flapVentMounting screws.Clampingring - kit AS1562 consists of clamping ring and screws.The service kit "pump head" (AK2050) holds the spare parts for the pump head (please check "Downloads & Information").

From €53.00 *

Service kit for WHALE GULPER waste pump

Service kit for WHALE GULPER waste pump

Accessory for waste pump WHALE GULPER.

€64.00 *

Bilge water filter (oil strainer) WAVESTREAM

Bilge water filter (oil strainer) WAVESTREAM

The MARPOL Convention prohibits the discharge of oily wastewater into the sea. This filter removes the oily substances from the pumped bilge water by a patented filter system, so that the bilge water can be pumped out almost without oil residues and the water pollution is minimized.The filter is installed behind the bilge pump and in front of the ship's passage. It is suitable for oil residues, large dirt must be removed from the bilge before.Supplied with a stainless steel wall mounting plate.Replacement filter cartridges are available, annual replacement is recommended.LLOYD'S REGISTER Type Approved.

From €179.00 *

Filter cartridge for WAVESTREAM bilgewater filters

Filter cartridge for WAVESTREAM bilgewater filters

Accessory for bilge water filter WAVESTREAM.

From €39.90 *

Spare parts for bilge pump PLASTIMO 12760

Spare parts for bilge pump PLASTIMO 12760

Accessory for PLASTIMO bilge pump type 12760 (our Art-No. 1768-025).

From €32.90 *

Spare parts for bilge pump PLASTIMO 11722 / 11723

Spare parts for bilge pump PLASTIMO 11722 / 11723

Accessory for PLASTIMO bilge pump art-no. 1768-038 and 1768-039.

From €17.90 *

Outlet elbows for diaphragm pump PLASTIMO 11722

Outlet elbows for diaphragm pump PLASTIMO 11722

Outlet elbows for the diaphragm pump PLASTIMO model 11722.They are screwed and fitted with an O-ring for perfect water tightness and added safety (quick release facility). For a tube diameter of 38mm.

€17.90 *

Impeller pump JABSCO

Impeller pump JABSCO

Self-priming impeller pump with free shaft end. for socket mounting. Equipped with neoprene impeller for use as sea or fresh water pump.The pump housing is made of bronze, the axle with ball bearings is made of stainless steelThe details regarding the output refer to an input speed 1500 U/min and back pressure at 0.3 bar.

€269.00 *

JABSCO Impeller

JABSCO Impeller

Original JABSCO impeller for installation on most cooling water bilge pumps and universal pumps.To keep motors and pumps running smoothly, choosing the right impeller is critical. In addition to the hub mount and size, the material of the impeller should match its application:Neoprene is the most commonly used material for impellers and is suitable wherever only small amounts of oil or diesel fuel are present. Neoprene impellers are therefore suitable for engine cooling and for salt or fresh water pumping.Nitrile is oil resistant and can also be used for heavily polluted water. Impellers made of nitrile are therefore suitable for bilge and bilge pumps.The impellers are usually supplied with a matching paper cover gasket.Other JABSCO impellers and spare parts are also available at short notice on request.To see the matching image for the impeller, simply click on the part number in the table below.

From €37.00 *

Tool for removing impellers JABSCO

Tool for removing impellers JABSCO

An exceptionally practical tool for removing impellers without damaging the pump housing.Body and jaws of aluminum, shaft of stainless steel.Dimensions, approx. 140 x 165 mm (W x H). Weight, 450 g.

From €99.00 *

Grease for impellers JABSCO

Grease for impellers JABSCO

Accessory for JABSCO impellers: JABSCO impeller grease, 2,5 ml tube.

€3.90 *

Impeller-kit JABSCO 6303-0003K

Impeller-kit JABSCO 6303-0003K

Spare impeller for JABSCO pumps.

From €34.90 *

Impeller pump WATER-PUPPY 2000

Impeller pump WATER-PUPPY 2000

Efficient electric pump with bronze pump head and impeller of nitrile rubber (oil-proof), dry self-priming to 1.2 m.Power 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), intended for endurance use.Dimensions 190 x 120 x 80 mm.Attachment 1/2" (inner) or 25mm hose.Versions for 12V or 24V on-board voltage are available.Also available is the JABSCO UTILITY PUPPY 2000 version specially designed for pumping bilge water with 20-minute dry-running protection.

From €269.00 *

Impeller pump JABSCO UTILITY-PUPPY 2000

Impeller pump JABSCO UTILITY-PUPPY 2000

Powerful impeller pump with bronze pump head and impeller made of nitrile rubber (oil-resistant), dry self-priming up to 1.20 m. Developed for pumping bilge water. Dry-running protection up to 20 minutes. Capacity 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), suitable for continuous operation.Dimensions 190x120x80 mm.Versions for 12V or 24V on-board voltage are available. Connection 3/4" (inside).

From €439.00 *

Impeller pump JABSCO with mechanical cone clutch

Impeller pump JABSCO with mechanical cone clutch

With mechanical cone clutch.These pumps work via a V-belt and can be coupled by hand when needed. Pump with high output (specification at 1500 U/min and a back pressure of 0.3 bar) and self priming from dry. Well suited as an emergency pump or as a deck-wash pump. Pump housing, bronze; stainless steel shaft; neoprene impeller.

From €1,165.00 *

Impeller Pump MARCO UP1

Impeller Pump MARCO UP1

Self-priming electric water pump with with nitrile rubber impeller. The pump body is made of nickel-plated brass. The pump is dry self-priming up to 1.5 m height.The connections have a BSP female thread. A direct hose connection to the connection pieces is also possible.Available in two power ratings for 12 or 24 volts.Also available for 220 volts, see matching items. See similar articles.

From €134.00 *

Impeller pump with reverse switch MARCO UP1-JR

Impeller pump with reverse switch MARCO UP1-JR

This universal feed pump for freshwater and seawater has a hard-wearing impeller made of nitrile rubber. The motor is equipped with an integrated waterproof switch with three positions (forward/off/reverse) so that the flow direction can be changed.This compact design makes the impeller pump ideal for transferring water or grey water, as well as for emptying bilges and grey water. The pump body is made of nickel-plated brass and the impeller is made of hard-wearing nitrile rubber. The pump is dry self-priming up to a height of 1.5 metres. The connecting pieces allow direct hose connection, but also have BSP internal threads, so that connection with appropriate fittings is also possible.Available in two performance levels for 12 over 24 volts.You can find other MARCO pumps in the UP1 series under the "Similar products" tab.

From €149.00 *

Impeller for impellerpump MARCO UP1-J

Impeller for impellerpump MARCO UP1-J

Impeller IMP2 of special nitril rubber. Original spare part for UP1-J and UP1-JR MARCO pumps.Dimensions hight x Ø: 22 x 40.5 mm.Bore Ø: 8 mm.

€32.90 *

Request sent successfully

Request wasn't send - a error occured. Please try again.