Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Crowbar with nail claw.

Measurments:
Length: 600 mm, depth: 21 mm, weight: 1.1 kg.

Fire-prevention tool pursuant to the operation guidelines
for "bettering the safety of traditional ships."
Questions about the product?

Last seen products

More articles from this category

Axe
Axe
Axe with ash wood handle.

€33.00 *
Details
Hatchet
Hatchet
Hatchet with ash wood handle.

€19.90 *
Details
Crowbar
Crowbar
Crowbar with nail claw. Measurments: Length: 600 mm, depth: 21 mm, weight: 1.1 kg. Fire-prevention tool pursuant to the operation guidelines for "bettering the safety of traditional ships."

€14.50 *
Details
Adze Flat
Adze Flat
OCHSENKOPF quality tool, made of forged tool-grade steel, finely sharpened and painted.The handle supplied only needs to be fitted by the customer.Also available as a hollow adze (see matching articles).

€78.50 *
Details
Adze Hollow
Adze Hollow
OCHSENKOPF quality tool, made of forged tool-grade steel, finely sharpened and painted.The handle supplied only needs to be fitted by the customer.Also available as a flat adze (see matching articles).

€108.00 *
Details
Handle for adze
Handle for adze
Handle for carpenter's adze.The handle must be reworked and fit before use.

€18.50 *
Details
3407-000 GLORIA SO 200E-M Aerosol-Löschanlage für manuelle Auslösung
GLORIA SO 200E-M aerosol extinguishing system for manual act
The GLORIA SO 200E-M aerosol extinguishing system was specially developed for use where there is a risk of fire in a largely enclosed space (e.g. in the engine compartment on board).The system is installed as a stationary unit and is manually triggered to extinguish class B fires (flammable liquids).The extinguishing system is easy to install, simple to use and requires little maintenance.If the smell of burning is detected or a fire is detected visually, the boat's engine and ignition are switched off. Pressing the trigger button activates the extinguishing generator and starts the extinguishing process. The environmentally friendly extinguishing agent aerosol is produced from potassium carbonate.One cartridge is sufficient for a room volume of up to 1.5 cubic meters. In larger rooms, up to three cartridges (then for a room volume of up to 4.5 cubic meters) can be installed and triggered.The extinguishing generator (cartridge) must be replaced after five years.Attention: The connection of the cartridges was changed in 2023. To insert a replacement cartridge into an older system, adapter E02/E03-AK2-11 (article-No. 3407-101) is also required.Technical featuresExtinguishing agent quantity: 200 gVolume of the room to be protected: 0.5 - 1.5 m3Supply voltage: 6 - 24 V/DCIgnition current: min. 1.75 AContinuous operating temperature: - 35 °C to 60 °CShort-term operating temperature: - 35 °C to 85 °CScope of deliveryFire extinguishing system type SO 200E-M (with one cartridge)Complete installation kit (connection material, cable, trigger button and fixing material)Wall bracketCurrent inspection sticker (new device certificate)Further information under "Downloads".

From €99.00 *
Details
GLORIA 6 kg dry fire extinguisher
GLORIA 6 kg dry fire extinguisher
Proven universal extinguisher for class A, B, and C fires, pursuant to DIN 14406 with certification from SeeBG.Features:Plate-steel bracket, protected with plastic,inner gas bottle and impact head fitting,testable,refillable,hose with suppressible extinguishing nozzle for measured use,Spray width 6 - 7 m,filled with GLUTEX extinguishing powder.Comes with simple wall bracket.A vibration resistant marine bracket is also available on demand.

From €112.90 *
Details
GLORIA carbonic acid fire extinguisher
GLORIA carbonic acid fire extinguisher
Special fire extinguisher for fire class B (flammable liquid substances).Features:Aluminum container, plastic coated,testable and refillable,filled with liquid carbon dioxide - leaves no residue when used.GLORIA CO2 extinguishers have the approval of SeeBG.The 2 kg extinguisher is supplied with a wall bracket.The 5 kg extinguisher is supplied with a simple wall hook, a vibration-proof ship's bracket is available as an accessory.

From €99.50 *
Details
Fire plaid
Fire plaid
Made from heat-resistant fiberglass cloth.Size 100 x 100 cm.Comes in a practical storage box.

€27.90 *
Details
Gloves fire resistant
Gloves fire resistant
Fire-protection item: fireproof protective glove for onboard firefighting.Pursuant to the equipment regulations in the "safety policy for traditional ships, attachment 1.11".

€47.90 *
Details
Fire department hatchet
Fire department hatchet
Small hand axe.Red lacquered head with a sharpened cutting edge on the one and a lever blade on the other side.The oval, insulated shaft of steel tube is force fitted into the head.

€49.90 *
Details
Fire department axe
Fire department axe
Classical fire axe in very strong professional quality.Red painted head with a sharpened cutting edge on the one and a lever blade on the other side.Oval shaft from ash wood, varnished transparent.The head is secured with two ring wedges and two tapered collars.Pursuant to DIN 149000 FA.

€59.90 *
Details
Jet pipe with man protection spray
Jet pipe with man protection spray
Nozzle pipe made from strong aluminium. With a STORZ C coupling and additional water curtain. Nozzle diameter 12 mm. The nozzle pipe has a water flow of 345 l/min. Throw distances:full jet 27 m, spray jet 11 m. Fire-protection item pursuant to the guidelines in "Improving the safety of traditional ships.".

€125.00 *
Details
Safty line, fire resistant 30m*10mm
Safty line, fire resistant 30m*10mm
Fireproof safety rope (flame protection rope).Diameter 10 mm, length 30 m, with knotted thimble and snap hook. Colour: signal orange.The line has a guaranteed strength of 3.5 kN (350 daN) over five minutes of use in the seat of a fire.MED/SOLAS approval (No. 210004-00) by BG Verkehr, Dienststelle Schiffssicherheit. The EC-Type Examination Certificate (PDF download below) and instructions for use are enclosed with the line.

€167.90 *
Details
GLORIA protective cover for fire extinguisher FS-6/EK
GLORIA protective cover for fire extinguisher FS-6/EK
The fire extinguisher protective hoods from GLORIA are ideally suited for protecting portable fire extinguishers. The protective hoods can be mounted on the wall.The upper part is made of crystal clear PETG plastic. The gray lower part is made of the material PS-PE and has a wall thickness of 3 mm.The back part is equipped with two tension locks and two grip grooves. Sealing of the closures is possible.Temperature resistant from -20ºC to +60ºC.Delivery without fire extinguisher.The following GLORIA devices fit in the hood:6 kg Pouder-fire extinguisherPD6, P6 EASY, PH6 EASY, P6 Pro6 l Foam-fire extinguisherSE+6P, SK6P, SH6P6 l Water-fire extinguisherWH6P

€59.90 *
Details