Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Bell lanyard of white nylon rope.
Cleanly crown plated by hand, with brass thimble.
Questions about the product?

Last seen products

More articles from this category

Brass bow shackle
Brass bow shackle
Bow shackle with screw-in pin.Made from polished cast brass.

From €3.30 *
Details
Signal gong
Signal gong
Large gong made of polished brass.Type-tested and approved by the BSH (Federal Maritime and Hydrographic Agency Germany).Equipment regulation according to KVR/COLREG, regulation 33a:All vessels over 100 m carry a gong in addition to the bell (with a diameter of at least 300 mm).The gong is used to give fog signals at anchor. Diameter 500 mm, total weight 4.2 kg.Delivery includes striker and test certificate.

€479.00 *
Details
Brass ship's bell
Brass ship's bell
Heavy ship's bell with exceptionally canorous sound made from brass. Handmade in Germany, using a traditional sand-casting technique. Every bell is cleanly dressed to size and polished after casting, the top and suspension bracket are left unpolished. The bells are not varnished.

From €48.90 *
Details
Bell lanyards handmade
Bell lanyards handmade
Traditional bell lanyard.Cleanly crown-plaited by hand, with brass or stainless steel thimble.Unrottable polyester hemp rope, natural color.

From €11.50 *
Details
Bell lanyard nylon handmade
Bell lanyard nylon handmade
Bell lanyard of white nylon rope.Cleanly crown plated by hand, with brass thimble.

€24.89 *
Details
Bell lanyard handmade
Bell lanyard handmade
Traditional bell lanyard for large bells.Crown plaiting with turks heads, with brass thimble.Of natural polyester hemp rope, cleanly hand-worked.Natural color.

From €25.89 *
Details
BSH approved solid brass ship´s bell
BSH approved solid brass ship´s bell
Heavy ship's bell made of polished brass. The bell is manufactured using the traditional sand casting process. It is cleanly turned and polished on the outside and cast-grey on the inside. The surface is unlacquered.Type-tested and approved by the BSH (Federal Maritime and Hydrographic Agency - Bundesamt für Seeschifffahrt und Hydrographie). You will find the National Approval as a pdf file under "Downloads".Equipment regulation according to KVR/COLREG, rule 33a:All ships over 20 m (ship class I, II, III) carry a bell with a diameter of at least 300 mm.Ships under 20 m (ship class IV) are not required to be equipped in accordance with COLREG/COLREG. However, a bell with a diameter of 200 mm is recommended.Delivery includes test certificate for the bell.

From €174.00 *
Details
Brass ship`s bell & bracket
Brass ship`s bell & bracket
Ships bell made from brass with wall bracket. The bell is manufactured in the traditional casting method and has a high gloss finish.The wall bracket is supplied with a mounting wedge: only this piece is screwed on. Thus the bell can simply be dismounted from the wedge and put away.These bells are die-cast from brass and therefore have a clear, high sound. The bell with diameter 300 mm is RINA approved as signal bell of ships over 20 m with carriage requirements. Shipment: bell, bracket, mounting wedge. Available with polished or chromed finish.

From €199.00 *
Details
Ship´s bell with bracket
Ship´s bell with bracket
These bells are die-cast from brass, the surface is brass polished or chrome plated. The sound is clear and very bright. They are lighter than sand cast bells.Supplied complete with bell holder and white ribbon.

From €39.90 *
Details
Bracket for bells, curved
Bracket for bells, curved
Holder for ship's and fog bells. Made from sand-cast brass. Finish either rolled and polished (unlacquered) or chromed.The "A" measurement should be at least 0.6 x the bell's diameter.

From €26.91 *
Details
Bracket for bells, straight
Bracket for bells, straight
Straight wall bracket for ship's bells. Made from sand-cast brass. Finish either rolled and polished (unlacquered) or chromed. This straight holder is also well suited for lamps, etc. When used for a bell, the holder measurement "A" should be at least 0.6 x the bell's diameter.

From €24.89 *
Details
Brackets for large bells
Brackets for large bells
For large ship's and fog bells. Made from sand-cast brass. Finish either rolled and polished (unvarnished) or chromed. The "A" measurement should be at least 0.6 x the bell's diameter.

€89.50 *
Details