Square-ending socket spanner for hatch lock

Art. No.	description	Price (unit)	Delivery time	Note list	Buy

Square-ending socket spanner 19 mm made from special stainless steel.
Shaft and tommy bar tempered and bronzed for hatch lock.

Questions about the product?

Last seen products

More articles from this category

Hatch lock assemblies steel DIN83104

Steel door latch for heavy ship doors and hatch covers. The sleeve of steel tubing is made to be welded into steel bulkhead doors. TYPE A (DIN 83104 A73) standard implementation with two welded handles St 37-2 and a steel sleeve (length of the sleeve 73 mm). For doors in insulated walls there is a type with a longer sleeve (93 mm).The handles are primered with red brown zinc oxide, the sleeve is equipped with two sockets made from brass and with holes for grease nipples (thread M 10 x 1).A stop pin made from steel to weld to a steel frame is available as an accessory. There are a number of special designs available: TYPE B with handle and square-headed plugs (19 x 19 mm), TYPE C with handle and pan head. All parts are available also separately.

From €52.90 *

Details

Hatch lock assemblies stainless steel DIN83104

Stainless steel door latch for heavy ship doors and hatch covers. The sleeve of stainless steel tubing is made to be welded in.TYPE A (DIN 83104 A73) Version optionally with two handles made of A4 stainless steel or A4 polished stainless steel and optionally a sleeve made of aluminium, A4 stainless steel or steel (length of sleeve 73 mm). The sleeves have an M10 x 1 grease nipple thread, the bushes are made of polyamide.A stop pin to weld to the frame is available as an accessory. TYPE B design as TYPE A, but with one handle and square spigot (19 x 19 mm). TYPE C design as TYPE A, but with one handle and flat head.All parts are available also separately.

From €117.00 *

Details

Spares for Hatch lock assembly DIN83104

Accessories for DIN83104 sash fasteners:Stop pins made of steel or A4 stainless steel for welding.Dimension: 12 x 50 mm (diameter x length)Lubrication nipple made of galvanized steel (M10 x 1) or A4 stainless steel (flat nipple M10 x 1)Form A73 sleeves in various materials for DIN83104 sash fasteners.

From €1.50 *

Details

Stainless steel hatch lock

Strong door fastener for heavy ship doors made from A2 stainless steel.It requires a door thickness of 55-60 mm width, the axis length is not alterable (axis diameter = 15 mm).The handle length is 190 mm, length of the latch is 60 mm. It is on both sides equipped with square mounting plates of (L x W x H) 63 x 63 x 3 mm with 4 countersink holes of 6 mm.The latch has a stop, that restricts the angle of movement to 90°.

€107.00 *

Details

Square-ending socket spanner for hatch lock

Square-ending socket spanner 19 mm made from special stainless steel.Shaft and tommy bar tempered and bronzed for hatch lock.

€67.50 *

Details

Hatch lock brass polished or chromed

Heavy hatch made from brass with a firm, strong handle. For bolting bulkheads and doors.With counter plate and bore for a padlock.Surface polished or chromed brass. Suitable for wood, but can also be used for steel bulkheads. Measurements:Hinge length (door depth): 55 mm.Mounting plate for the hinge diameter: 50 mm.Hinge rod diameter = 19 mm.

From €92.00 *

Details

Hatch lock aluminium

Large aluminium sash lock for hatches. Low installation height above deck so that no lines can get caught and there is no risk of tripping.The sash lock is inserted into a 50 mm hole in the hatch cover. Below deck there is a large, smooth-running locking lever, which engages in a plastic bearing supplied with the boat by means of a rotary movement and, thanks to its special design, pulls the hatch cover downwards and thus closes it tightly.The lock can be operated from the outside with a winch handle with an internationally standardised octagon.

€166.00 *

Details

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm