Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Wall shade inox

4255-001 Wandisolierplatte Edelstahl, flach
4255-002 Isolierplatte flach - es wird empfohlen die flache Platte mit Abstandshaltern zu montieren
4255-002 Wandisolierplatte Edelstahl, gewinkelt

from €35.90*

€35.90*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

version
length (cm)
width (mm)
strength (mm)
Stk

Small reflector plate for heat protection behind flue pipes.
Plate stainless steel.
Measurements:
50cm high, 15cm wide.
Available as flat or recessed version.

The flat plate must be mounted with spacers or insulation behind, the recessed plate can be mounted directly on the wall.

more information
Show 2 articles
📖 View article in the TOPLICHT catalogue


Small reflector plate for heat protection behind flue pipes.
Plate stainless steel.
Measurements:
50cm high, 15cm wide.
Available as flat or recessed version.

The flat plate must be mounted with spacers or insulation behind, the recessed plate can be mounted directly on the wall.

Questions about the product?

Last seen products

More articles from this category

Cap for through-hull REFLEX
Cap for through-hull REFLEX
Closing cap, stainless steel. Suitable for all REFLEKS flue pipes.

From €48.00 *
Details
Deck through hull REFLEKS components
Deck through hull REFLEKS components
Components for mounting a through-deck fitting that matches your deck inclination perfectly.Pipe, a round deck plate and flange to weld locally.Made of stainless steel.Fits the REFLEKS flue pipes.

From €98.00 *
Details
Rotary ventilator ASPIROMATIC stainless steel
Rotary ventilator ASPIROMATIC stainless steel
Rotating stainless steel vent that can also be used as a gas vent for all opening types, protected against backdrafts and supports the correct draft of the chimney.The (folding) extraction fan runs on ball bearings and is propelled by the wind.The flange is made of a light DURAL-INOX alloy. Available is also a version 240 C with a square ground plate (330 x 330mm) for profiles of 200 x 200mm up to 250 x 250mm. The enclosed attachment bolts allow mounting on pipes of varying diameters.Output data based on 3 beaufort wind velocity (10 kn).

From €298.00 *
Details
REFLEKS-adapter for ASPIROMATIC ventilator
REFLEKS-adapter for ASPIROMATIC ventilator
Fits the REFLEKS 90 mm flue pipe system, in order to attach the small ASPIROMATIC ventilator (Art-Nr. 1836-160). Stainless steel, 1 mm wall thickness. Diameter 95 / 150 mm, height 95 mm.

€107.00 *
Details
Flue pipe adapter
Flue pipe adapter
The flue accessory from the REFLEKS range may be used on DICKINSON stoves.To use the REFLEKS flue pipe, we offer an adapter that must be replaced on DICKINSON stoves.

From €61.90 *
Details
Superheater 6"-Airflow-burner DICKINSON
Superheater 6"-Airflow-burner DICKINSON
As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

€76.00 *
Details
DICKINSON Oil-Controller
DICKINSON Oil-Controller
As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €395.00 *
Details
DICKINSON flue tubes
DICKINSON flue tubes
Stove pipe for DICKINSON stoves and ovens.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €83.50 *
Details
DICKINSON flue tube bended
DICKINSON flue tube bended
Pipe elbow for DICKINSON stove pipes.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €102.00 *
Details
DICKINSON flue tube cover
DICKINSON flue tube cover
Exhaust hood for DICKINSON stove pipes.Rain-proof standard hood, made of stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €227.00 *
Details
DICKINSON flue tube through hull
DICKINSON flue tube through hull
DICKINSON deck sleeve made from stainless steel, fits DICKINSON stove pipes. delivery with inner ring (the inner ring can also be orderd seperatly). Matching covers (for when the pipe or hood is put below) are available. As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €45.90 *
Details
DICKINSON contact protection
DICKINSON contact protection
As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €163.00 *
Details
Draw regulator for DICKINSON flue pipe
Draw regulator for DICKINSON flue pipe
A stainless steel flue pipe T-piece with integrated draught regulator. The draught regulator is used as the first or second piece of pipe from the top of the stove or oven. The draught regulator helps to reduce the draught in long chimneys and allows the user to operate the appliance at a lower fuel setting.The draught reduction is adjustable. For this purpose, the pendulum damper is adapted to the respective chimney installation via an adjustable counterweight.Recommended for all installations and especially for chimneys with a height of 6 feet or more.As a Dickinson general importer and specialist wholesaler, we stock almost all original spare parts and accessories. Parts not listed here are available on request.

From €174.00 *
Details
DICKINSON exhaust hood
DICKINSON exhaust hood
Exhaust hood for DICKINSON stove pipes.H - shaped, for difficult ventilation situations.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €227.00 *
Details
DICKINSON HEATEX transfer heater
DICKINSON HEATEX transfer heater
Heater with which radiant heat from the exhaust pipe system is diverted to other rooms.Instead of a 550 mm stove pipe, HEATEX is used in the pipe system. It consists of a 550mm tube jacketed by a heat exchanger. On the back there is a flange with which DICKINSON pipes or flexible exhaust hoses are connected to the fan. When the fan is switched on, the heat is sucked in through the connecting line and distributed in the room.The scope of delivery includes the heat exchanger, the fan (12 or 24 volts) and a pipe angle.All parts are made of stainless steel.

From €442.00 *
Details
Exhaust through hull with plane outlet
Exhaust through hull with plane outlet
Very robust through hull outlet made from polished stainless steel A4 (AISI 316) with a plane flange to bolt from the outside.Wall thickness of the tube 2 mm, wall thickness of the flange 4 mm.The flange is 45° angled with the tube.

€329.00 *
Details
Flue pipes REFLEKS
Flue pipes REFLEKS
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €29.90 *
Details
Flue pipe elbow 45° REFLEKS
Flue pipe elbow 45° REFLEKS
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €56.90 *
Details
Flue pipe elbow 90° REFLEKS
Flue pipe elbow 90° REFLEKS
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €61.00 *
Details
Flue pipe elbow 90° REFLEKS with cleanout door
Flue pipe elbow 90° REFLEKS with cleanout door
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €69.90 *
Details