Go to homepage
€0.00*
Jobs
Catalogue
Quick order



Twisted spiral pipe, single layer, stainless steel.
Heat resistant to 600°C. Non-flammable, according to DIN 4102. The bending radius is 1.5 to 3.0 x nominal diameter (mm).

Questions about the product?

Last seen products

More articles from this category

Exhaust through hull with plane outlet
Exhaust through hull with plane outlet
Very robust through hull outlet made from polished stainless steel A4 (AISI 316) with a plane flange to bolt from the outside.Wall thickness of the tube 2 mm, wall thickness of the flange 4 mm.The flange is 45° angled with the tube.

€329.00 *
Details
Wall shade inox
Wall shade inox
Small reflector plate for heat protection behind flue pipes.Plate stainless steel.Measurements:50cm high, 15cm wide.Available as flat or recessed version.The flat plate must be mounted with spacers or insulation behind, the recessed plate can be mounted directly on the wall.

From €35.90 *
Details
Flue pipe for the MARITIME BOOSTER
Flue pipe for the MARITIME BOOSTER
Flue pipe made from stainless steel (AISI 304), with a thickness of 0,5mm for the inboard exhaust gas routing.The pipes are cylindrical and can be shortened according to any length.Silicone rubber in the shape of a ring acts as the sealant in the rebated joint.

From €59.00 *
Details
Elbow flue pipes for the MARITIME BOOSTER
Elbow flue pipes for the MARITIME BOOSTER
Elbow flue pipe made from stainless steel (AISI 304), with a thickness of 0,5mm for the inboard exhaust gas routing.The elbow flue pipes are cylindrical and are available in angles of 45° or 90°.Silicone rubber in the shape of a ring acts as the sealant in the rebated joint.

From €145.00 *
Details
Flexible pipe stainless steel
Flexible pipe stainless steel
Twisted spiral pipe, single layer, stainless steel.Heat resistant to 600°C. Non-flammable, according to DIN 4102. The bending radius is 1.5 to 3.0 x nominal diameter (mm).

From €24.50 *
Details
Insulation hose
Insulation hose
To insulate the exhaust pipes we offer tubes made from a highly heat resistant aramid aluminium fabric.Material thickness approx. 1,4 mm, approx. 500 g/m², enduring up to 1000°C radiant heat.

From €62.70 *
Details
Reducing abaptor 80/60 mm
Reducing abaptor 80/60 mm
Adapter for reducing diameter of exhaust pipe from 80 mm to 60 mm. Stainless steel.

€71.90 *
Details
Exhaust through hull outlet
Exhaust through hull outlet
Very robust through hull outlet made from polished stainless steel A4 (AISI 316) with a flange to bolt from the outside.Wall thickness of the tube 2 mm, wall thickness of the flange 4 mm.The flange is at right angles with the tube.

From €103.90 *
Details