Small filter for use as a prefilter for pressure-water pumps.See-through body for easy monitoring. Cover easy to remove.Dimensions: 50 mm.We deliver with 1/2" thread for screwing direct ont to SHURFLOW pressure-water pumps.This article is also deliverable with 12mm hose nozzle.

Small compact pre-filter, exceptionally easy to clean.The filter retains particles such as sand, dirt and suspended matter.For installation in the hose line on the suction side of the pump.Hose attachments on both sides for 13 mm or 19 mm.

Slim, compact activated carbon filter unit from WHALE.The AQUASOURCE CLEAR WF 1230 drinking water filter removes turbidities and bad taste through the filtering out of organic substances, chlorine and heavy metals.Mounting on the pressure side of any type of water pump. Maximum pressure: 6 bar.Comes with two clip brackets for simple change.Life 1 year or 4500 litres.13 mm hose attachments on both sides.Dimensions: D = 50 mm, length 300 mm.

The pump AQUA KING II Junior 2.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.5 m and may run dry. The encapsulated pressure switch start at 1 bar and off again at 2 bar. A pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 7,6 l/min,pressure: 1 - 2 bar,for supplying up to 3 taps,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose, which can be screwed onto the thread with a quick-release fastener.

The pump AQUA KING II Standard 3.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.5 m and may run dry. The encapsulated pressure switch start at 1.3 bar and off again at 2.0 bar. The pump is equipped with an integrated bypass for precise and controlled dosing and even water flow, a pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 11.3 l/min,pressure: 2,4 - 3,1 bar,for supplying up to 3 taps,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose, which can be screwed onto the thread with a quick-release fastener.

Liquid disinfectant without silver (ions), suitable for disinfecting drinking water.DEXDA® Plus contains the active ingredient sodium hypochlorite, which is approved in accordance with the current German Drinking Water Ordinance (TrinkwV), and effectively combats microorganisms/pathogens such as viruses, germs, fungi and bacteria.Suitable for all tank and vessel materials. Available in 250ml bottles with dosing cap and in 5-liter canisters for large-scale users such as commercial shipping.Dosage: Drinking water disinfection 1:10000 (1ml DEXDA Plus to disinfect 10 litres of drinking water)Application: Only use in clear water and ensure good mixing. Add 1ml DEXDA Plus per 10 litres of water and leave to act for 30 minutes. For water temperatures <10°C, leave to act for at least two hours.Note: Not approved in Switzerland.Use biocidal products with care. Always read the label and product information before use.

MICROPUR CLASSIC inactivates bacteria in drinking water tanks, containers and pipes. It preserves clean drinking water and keeps it free of germs, algae and odors.The effect of Micropur Classic is based on the bacteriostatic and bactericidal properties of silver. Unlike chlorine, which acts in water for only a few hours, silver ions make water last up to 6 months. The silver ions attach themselves to the cell walls of microorganisms and thus prevent their growth.MICROPUR CLASSIC can be used wherever drinking water remains in a system for a long time, such as in cisterns or water tanks. It is ideal for water conservation in a boat, camper or caravan.Suitable for clear water, not for muddy water, as suspended solids can impair the effect of the silver ions. Application:Dose MICROPUR into the empty or half-filled water container. Immediately fill the container with the desired amount of clear water. The resulting turbulence serves to mix Micropur Classic and water. Additional stirring is not necessary. If Micropur Classic is added after the container has been filled, the water must be stirred so that the silver ions are evenly distributed. The reaction time is 120 min. For use in tap water of drinking quality. The powder must not be premixed in little water, otherwise the silver will precipitate as insoluble silver chlorite and lose its effectiveness.For use in plastic or glass. Test metals before use.Use biocidal products with care. Always read label and product information before use.MC 10.000P: BAuA No. N-58033MC 50.000P: BAuA No. N-58033MC 1.000F: BAuA No. N-58032