Data-transfer cable for KOBELT MIGHTY MARINER
Data-transfer cable for KOBELT MIGHTY MARINER
from €153.00*
€153.00*
Prices incl. VAT plus shipping costs
Available, delivery time: 1 Tag
In stock
Connection and data transmission cable for the KOBELT MIGHTY MARINER electronic motor control.
The maximum length of the data transmission cable must not be longer than 40 meters.
The following are required:
- Double shielded data transmission cable type "C" (2 pairs of wires, 18AWG) to connect the actuators to each other, to the switching stations and to connect the switching stations.
- Connection cable type "P" (two-core, 12AWG) for connecting the power supply.
- Type "B" cable (7-core, 18AWG) is required to connect the synchronization unit or an open-circuit fuse.
Please determine your individual requirements or contact us for advice by telephone
Connection and data transmission cable for the KOBELT MIGHTY MARINER electronic motor control.
The maximum length of the data transmission cable must not be longer than 40 meters.
The following are required:
- Double shielded data transmission cable type "C" (2 pairs of wires, 18AWG) to connect the actuators to each other, to the switching stations and to connect the switching stations.
- Connection cable type "P" (two-core, 12AWG) for connecting the power supply.
- Type "B" cable (7-core, 18AWG) is required to connect the synchronization unit or an open-circuit fuse.
Please determine your individual requirements or contact us for advice by telephone
More articles from this category
Throttle control
From
€159.00 *
Classic brass throttle control for connecting standard control cables or wires.Four holes in the lever allow a range of installations from 28 mm to 68 mm. Comes with mounting bolts. Weight 410 g.Available in polished or chromed brass.Friction can be adjusted or a position set by rotating the black-plastic knob.
SEASTAR SOLUTIONS Control CLASSIC MT3-S
€265.00 *
The SEASTAR SOLUTIONS CLASSIC controll MT3-S for one single engine is a sturdy, classic single-lever control.It controls gearbox and throttle with one handle. Handle and housing are of chromed aluminum, the inner pieces of stainless steel.Functions:settings for neutral, forward and reverse,adjustable friction,warm-up function through pulling the handle outc,the handle's neutral position can be adjusted to 30°built-in microswitch as starteradjustable handle travel up to 80 mm,cable stroke can be set to PULL or PUSH inidividually.Material: Handle and housing of chromed aluminum, inner pieces of stainless steel.The control is manufactured by SEASTAR SOLUTIONS (formerly TELEFLEX / MORSE ).Comes complete with attachment pieces for Type 33 control cables.Also available for twin engines as MT3-TWIN.
SEASTAR SOLUTIONS Control CLASSIC MT3-TWIN
€488.99 *
The SEASTAR SOLUTIONS CLASSIC controll MT3-TWIN for two engines is a sturdy, classic single-lever control. It controls gearbox and throttle with one handle. Handle and housing are of chromed aluminum, the inner pieces of stainless steel.Functions:settings for neutral, forward and reverse,adjustable friction,warm-up function through pulling the handle outc,the handle's neutral position can be adjusted to 30°built-in microswitch as starteradjustable handle travel up to 80 mm,cable stroke can be set to PULL or PUSH inidividually.Material: Handle and housing of chromed aluminum, inner pieces of stainless steel.The control is manufactured by SEASTAR SOLUTIONS (formerly TELEFLEX / MORSE ).Comes complete with attachment pieces for Type 33 control cables.Also available for twin engines as MT3-S.
SEASTAR SOLUTIONS Side Mount Control CH2850
€245.00 *
Sturdy single lever side mount control, for a single engine. Designed for steering pedestal or cockpit wall mounting, polished stainless steel lever.Features:stainless steel lever,suitable for powerboat or sailboat,can be mounted with or without chrome cover plate,drop in replacement for popular 700 SS control,neutral "warm up" button for throttle only operation.Manufactured by SEASTAR SOLUTIONS (formerly TELEFLEX/MORSE).Supplied complete with connection accessories for switching cable type 33.
SEASTAR SOLUTION 700SS Sail Boat Side Mount Control
€169.90 *
One of the worlds most used motor controls: single handle control for sail boats for side mount. The matte black coated handle made from zinc die casting is equipped with the possibility to mount it horizontally or vertically and a rounded, rubberised handle to avoid that a rope gets caught. Switch mechanism steel, cover (110 x 140 mm) made from black plastic.The flat construction requires not more than 100 mm space behind the bulwark. Simple mounting. Features: neutral function by pressing the red button on the handle axe.dual action (throttle and shift in one lever),heavy duty lever in black polyester powder coated finish ,flush mount design,neutral safety switch (prevents starting in gear) as option (not included in standard control),standard control suits 33C type cables,neutral "warm up" button for throttle only operation,suits CC172, CC330 und CC633 cables. Manufactured by SEASTAR SOLUTIONS (formerly TELEFLEX/MORSE).Comes complete with kable kits for the standard control type 33C cables.
SEASTAR SOLUTIONS 700SM Motor Boat Side Mount Controll
€229.00 *
One of the worlds most often used motor controls: the TELEFLEX single handle control gear shift and engine control for side mounting. The matte black coated handle made from zinc die casting is equipped with the possibility to mount it horizontally or vertically. Switchmechanism steel, cover (110 x 140 mm) made from black plastic. The flat construction requires less than 100 mm space behind the bulwark. Simple mounting. Shipping complete with mounting parts for the standard control type 33C cables. Neutral function by pressing the button on the handle axe. Suits CC172, CC330 und CC633 cables. Features: Dual action (throttle and shift in one lever) Heavy duty lever in black polyester powder coated finish Flush mount design Neutral safety switch option (prevents starting in gear) Standard control suits 33C type cables Neutral "warm up" button for throttle only operation
Single lever control, curved handle KOBELT 2046
From
€1,160.00 *
Single-lever shifting system Type 2046. Bronze, with a polished or chromed finish. Single-lever shifting for single-engine boats. Throttle and gear are controlled with a single lever. For warming up the engine, the throttle can be adjusted alone by pulling out the handle. The shifting travels are adjustable: Gear shift to 75 mm, throttle to 40 mm. Curved handle with black knob. Controls come complete with cable connection kits for 33 cable with threads No. 10-32 UNF. Kits for 43 cable with threads 10-28 UNF are also available. Optional accessories: Neutral safety switch. KOBELT controls: top quality designs for professional mariners, tested and used worldwide for decades. They function perfectly and are beautiful. KOBELT controls set the standard. All pieces are made of bronze in a die casting process developed by KOBELT in the same factory. The axes and links are stainless steel, all visible surfaces are carefully polished or chromed.
Single lever control, T-handle KOBELT 2046
Price on request
Shifting system, polished or chromed bronze. Single-lever shifter for ships with one engine. Throttle and gear are controlled with a single lever. For warming up the engine, the throttle alone can be adjusted by pulling out the handle. The shifting travels are adjustable: Gear shift to 75 mm, throttle to 40 mm. Straight handle with straight T end piece.Also availlable with short T-handle (length 185mm) Controls come complete with cable connection kits for 33 cable with threads No. 10-32 UNF. Kits for 43 cable with threads 10-28 UNF are also available. Accessories: Neutral safety switch. KOBELT controls: top quality designs for professional mariners, tested and used worldwide for decades. They function perfectly and are beautiful. KOBELT controls set the standard. All pieces are made of bronze in a die casting process developed by KOBELT in the same factory. The axes and links are stainless steel, all visible surfaces are carefully polished or chromed.
Single lever/two engines control KOBELT 2047
From
€1,998.00 *
Classic bronze shifting system. Made of bronze and stainless steel, polished and chromed bronze. With curved handles with black knob. Single-lever function for ships with twin engines. For warming up the engine, the throttle alone can be adjusted by pulling out the handle. The shifting travels are adjustable: Gear shift to 75 mm, throttle to 40 mm.Controls come complete with cable connection kits for 33 cable with threads No. 10-32 UNF. Kits for 43 cable with threads 10-28 UNF are also available. Accessories: Neutral safety switch. KOBELT controls: top quality designs for professional mariners, tested and used worldwide for decades. They function perfectly and are beautiful. KOBELT controls set the standard. All pieces are made of bronze in a die casting process developed by KOBELT in the same factory. The axes and links are stainless steel, all visible surfaces are carefully polished or chromed.
Single lever/two engines control T-lever KOBELt 2047
From
€1,998.00 *
Classic bronze shifting system. Made of bronze and stainless steel, polished and chromed bronze. Swung handle with black knob.Single-lever function for ships with twin engines. For warming up the engine, the throttle alone can be adjusted by pulling out the handle. The shifting travels are adjustable: Gear shift to 75 mm, throttle to 40 mm.Controls come complete with cable connection kits for 33 cable with threads No. 10-32 UNF. Kits for 43 cable with threads 10-28 UNF are also available. Accessories: Neutral safety switch. KOBELT controls: top quality designs for professional mariners, tested and used worldwide for decades. They function perfectly and are beautiful. KOBELT controls set the standard. All pieces are made of bronze in a die casting process developed by KOBELT in the same factory. The axes and links are stainless steel, all visible surfaces are carefully polished or chromed.
Twin lever control KOBELT 2009-AL
From
€798.00 *
Classic, functional two-handle engine shifting system:The long handle, which locks into neutral, controls the gearbox; the short handle, with attached friction brake, regulates the throttle.Body and handle of bronze, bronze polished or chromed finish.The shift travels are adjustable (gearshift max. 75 mm).Due to it's exceptionally robust design, these controls can be rigged as two station installation, with synchronized movement of the handles.For two station installation, two extra control cables must be run to the second station. Controls come complete with cable connection kits for 33 cable with threads No. 10-32 UNF. Kits for 43 cable with threads 10-28 UNF are also available.For two station installation, an extra set of connection kits must be ordered.Comes with two self-sticking labels for helm labels.At the "Lock" version, the gear can only be shifted when the throttle is at idle.There are a large number of other engine-control systems available. Please request the KOBELT catalog! KOBELT controls: top quality designs for professional mariners, tested and used worldwide for decades.They function perfectly and are beautiful. KOBELT controls set the standard.All pieces are made of bronze in a die casting process developed by KOBELT in the same factory. The axes and links are stainless steel, all visible surfaces are carefully polished or chromed.
side mount control KOBELT 2042 Sail knob lever
From
€1,589.99 *
Classic side mount control for installation in bulkhead or cockpit walls or steering wheel column. Polished or chromed bronze. Single-handle shifter for one engine. For warming up the engine, the throttle can be used alone by pulling the spare knob. Idle setting: Handle on top (vertical installation). With removable, locked sailboat handle (with black end knobs). The shifting handle is protected against inadvertent shifting by a neutral setting lock (by pushing down on the shifter).Controls come complete with cabel connection kits for 33 cable with threads No. 10-32 UNF. Kits for 43 cable with threads 10-28 UNF are available on request.Optional accessories: Optional neutral safety switch: Prevents starting the engine with gear engaged. KOBELT controls: top quality designs for professional mariners, tested and used worldwide for decades. They function perfectly and are beautiful. KOBELT controls set the standard. All pieces are made of bronze in a die casting process developed by KOBELT in the same factory. The axes and links are stainless steel, all visible surfaces are carefully polished or chromed.
Side mount control KOBELT 2042 T-lever
From
€1,490.00 *
Classic side mount control for installation in bulkhead or cockpit walls or steering wheel column. Polished or chromed bronze. Single-handle shifter for one engine. For warming up the engine, the throttle can be used alone by pulling the spare knob. Idle setting: Handle on top (vertical installation). With straight T-handle, with neutral setting lock to protect against inadvertent shifting. Controls come complete with cabel connection kits for 33 cable with threads No. 10-32 UNF. Kits for 43 cable with threads 10-28 UNF are also available. Optional accessories: Neutral safety switch. KOBELT controls: top quality designs for professional mariners, tested and used worldwide for decades. They function perfectly and are beautiful. KOBELT controls set the standard. All pieces are made of bronze in a die casting process developed by KOBELT in the same factory. The axes and links are stainless steel, all visible surfaces are carefully polished or chromed.
Dual station control KOBELT 2091/2093
From
€759.01 *
Double solid bronze helm station engine controls! This shifting system, developed by KOBELT, is patented worldwide and unique! Single-handle function like types 2046 and 2047 that can be installed on two synchronously working steering stations. No switch is required when changing steering stations: The shifters at both steering stations are always parallel, so that use of either station is possible at any time.An installation for two steering systems / one engine is made up of - one Master unit (Type 2091) and - one Remote unit (Type 2093). The controls are interconnected with a special control chain and with special pull control cables, which must be supplied individually to the exact length desired. Please ask about price and delivery time based on the exact length needed for your boat under "remarks".Comes with a straight T-handle, finish polished bronze or chrome plated.Controls come complete with cabel connection kits for 33 cable with threads No. 10-32 UNF. Kits for 43 cable with threads 10-28 UNF are also available.The technical data sheet can be requested below under "Downloads & Information." KOBELT controls: top quality designs for professional mariners, tested and used worldwide for decades.They function perfectly and are beautiful. KOBELT controls set the standard.All pieces are made of bronze in a die casting process developed by KOBELT in the same factory. The axes and links are stainless steel, all visible surfaces are carefully polished or chromed.
Dual station, twin engine control KOBELT 2092
From
€1,349.00 *
Single lever controls for twin engines and two steering stations. This control system, developed by KOBELT, is patented worldwide and unique!Single-handle function types like Master unit 2092 and Remote unit 2094 can be installed on two synchronously working steering stations.No switch is required when changing steering stations: The handles at both steering stations are always parallel, so that control from either station is possible at any time.An installation for two steering systems/one engine is made up of - a Master unit (Type 2092) and - a Remote unit (Type 2094). The handles are attached with a special control chain and connected with special FELSTED control cables, which are finished individually to the exact length desired (please ask about price and delivery time based on the exact length needed for your boat under "remarks").Comes with a straight T-handle of polished or chromed bronze.Controls come complete with cabel connection kits for 33 cable with threads No. 10-32 UNF. Kits for 43 cable with threads 10-28 UNF are also available.Data sheet can be downloaded below under "Downloads & Information." KOBELT controls: top quality designs for professional mariners, tested and used worldwide for decades.They function perfectly and are beautiful. KOBALT controls set the standard.All pieces are made of bronze in a die casting process developed by KOBELT in the same factory. The axes and links are stainless steel, all visible surfaces are carefully polished or chromed.
Data-transfer cable for KOBELT MIGHTY MARINER
From
€153.00 *
Connection and data transmission cable for the KOBELT MIGHTY MARINER electronic motor control.The maximum length of the data transmission cable must not be longer than 40 meters.The following are required:Double shielded data transmission cable type "C" (2 pairs of wires, 18AWG) to connect the actuators to each other, to the switching stations and to connect the switching stations.Connection cable type "P" (two-core, 12AWG) for connecting the power supply.Type "B" cable (7-core, 18AWG) is required to connect the synchronization unit or an open-circuit fuse.Please determine your individual requirements or contact us for advice by telephone
KOBELT RemotePanel 6505-2000 MIGHTY MARINER
€899.00 *
Various components (e.g. side circuit 6506, the mobile control 7176 or other control heads) can be integrated into the KOBELT MIGHTY MARINER engine control system via the REMOTE PANEL 6505-2000 control unit.The REMOTE PANEL is only connected to the system and the control unit with data transmission cables.The waterproof housing is made of cast bronze, the surface is black.For complete electronic engine control, a KOBELTMIGHTY MARINER system is required into which the side circuit or mobile control unit is integrated.For complete MIGHTY MARINER systems with this circuit, please request a separate quotation.
KOBELT MIGHTY MARINER Controll
€3,990.00 *
The MIGHTY MARINER is an electronic engine control unit for single or twin engine systems, developed by the Canadian specialist KOBELT for the pleasure craft sector and professional applications.The console control units (control heads) are made of bronze, with a polished or chrome-plated surface. They are also available with a black or white coating on request.Up to four control stations can be connected to this compact, low-cost system. A system always consists of one (or more) console operating unit(s) per control station (e.g. KOBELT CONTROL HEAD 6505) and one control motor (ACTUATOR 6527) per machine.The control motor then regulates the engine speed and gearbox via conventional control cables so that no changes need to be made to the control elements on the engine.Microprocessor-controlledSimple communication between the components via CAN busConnection only with easy-to-lay data cable (must be ordered separately).Data cable length up to 40 metres - therefore also suitable for large yachts with long switching paths.Integrated functions that can be used from any helm position:Precise switching functionAdjustable shift delay for speed and gearboxWarm-up functionIdle switch as start interlockStation lockTemperature and cable self-monitoring.The installation of two-motor synchronisation is possible. A pair of sensors for two machines is available as an optional accessory. Please ask us about this.The servomotor can also be operated manually in the event of a power failure.Supplied complete with connection kits for switching cable type 33, but without switching cable. Also available with connection kits for switching cable type 43 on request.The system is CE-certified. Operating voltage 24 volts.The use of a DC / DC converter (direct current - voltage converter) is strongly recommended even with 24V on-board voltage to ensure a constant and safe power supply to the processor without voltage peaks! At least 10A output current and galvanically isolated outputs are required. We recommend the voltage converters of the VICTRON ORION series.
SEASTAR SOLUTIONS Control XTREME SINGLE
€269.00 *
Robust an modern single lever controll for engine and transmission operation of one machine. The shift lever is made of metal, the housing has a black cover with chrome ring.FEATURES:include start in gear protection,designed for use with both 3300/33C universal and OEM shift and throttle cable connections,suitable for most single engine/single station combinations,can be used in dual station boats with the DS unit,Optional neutral interlock available,Trim & Tilt options available,Drag adjustment on all models,Easy installation and set up,Neutral “warm up” button for throttle only operation.Manufactured by SEASTAR SOLUTIONS (formerly TELEFLEX/MORSE).Supplied complete with all accessories for connecting the common type 33 switching cables.The control is also available for a two-machine installation (Twin).
SEASTAR SOLUTIONS Control XTREME TWIN
€435.00 *
Robust an modern lever controll for engine and transmission operation of two machines. The shift levers are made of metal, the housing has a black cover with chrome ring.FEATURES:include start in gear protection,designed for use with both 3300/33C universal and OEM shift and throttle cable connections,suitable for most single engine/single station combinations,can be used in dual station boats with the DS unit,Optional neutral interlock available,Trim & Tilt options available,Drag adjustment on all models,Easy installation and set up,Neutral “warm up” button for throttle only operation.Manufactured by SEASTAR SOLUTIONS (formerly TELEFLEX/MORSE).Supplied complete with all accessories for connecting the common type 33 switching cables.The control is also available for a one-machine installation (SINGLE).