Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Centrifugal pump JABSCO

from €499.00*

€499.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

model
voltage (V)
current (A)
max. (l/h)
pressure (bar)
L (mm)
B (mm)
H (mm)
Stk

JABSCO centrifugal pumps CYCLONE are strong and durable pumps made from stainless steel, suitable as circulation pump for heating systems, ballast tank systems, cooling water or seawater, diesel or chemicals over a temperature range of +4° to 95°C.
They are available as high efficiency pumps (type 50840) with up to 110 l/min power for continuous operation or as high pressure pumps (type 50860) for the temporally limited usage (30 min maximum) with pressure of up to 1,6 bar.
Connection thread 3/4" BSP.
Four rubber puffer pads in the base plate ensure a quite and vibration free operation.

Centrifugal pumps are not self-priming, they must therefore be installed in such a way, that the flow of the pumped medium is guaranteed.

more information
Show 4 articles
📖 View article in the TOPLICHT catalogue


Downloads

JABSCO centrifugal pumps CYCLONE are strong and durable pumps made from stainless steel, suitable as circulation pump for heating systems, ballast tank systems, cooling water or seawater, diesel or chemicals over a temperature range of +4° to 95°C.
They are available as high efficiency pumps (type 50840) with up to 110 l/min power for continuous operation or as high pressure pumps (type 50860) for the temporally limited usage (30 min maximum) with pressure of up to 1,6 bar.
Connection thread 3/4" BSP.
Four rubber puffer pads in the base plate ensure a quite and vibration free operation.

Centrifugal pumps are not self-priming, they must therefore be installed in such a way, that the flow of the pumped medium is guaranteed.

Questions about the product?

Accessories

Multiflex hose PVC
Multiflex hose PVC
Green transparent PVC hose for drinking water, bilge pumps (also suction side) and on-board toilets.Spiral strengthened and thick-walled version for use as suction or pressure hose.Approved for human consumption. Limited resistance to oil and grease (may harden).

From €4.90 *
Details
Hose clamp stainless steel
Hose clamp stainless steel
Solid stainless steel design - all pieces completely stainless.With hexagonal bolts for high torque, high tear resistance and elasticity.

From €1.80 *
Details
T-bolt clamp
T-bolt clamp
Heavy, wide hose clamps, made entirely of A2-stainless steel.Hexagonal bolt for easy mounting in hard-to-reach corners. Due to the width particularly well suited for hose mounting on board.Type: HEAVY DUTY.

From €5.90 *
Details
Brass pipe-to-hose fitting
Brass pipe-to-hose fitting
Brass pipe-to-hose fitting with external thread and hexagon. Available for different hose diameters.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes and do not indicate the thread diameter.

From €3.20 *
Details
Brass pipe-to-hose fitting 90° with external thread
Brass pipe-to-hose fitting 90° with external thread
90° elbow hose nozzle made of brass, with external thread and hexagon for screwing in. For various hose diameters.Thread type: BSPThread form: cylindrical or parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €4.90 *
Details
Bronze pipe-to-hose fitting
Bronze pipe-to-hose fitting
Bronze pipe-to-hose fitting with external thread and hexagon. Available for different hose diameters.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €7.65 *
Details

Similar products

RHEINSTROM deck wash and bilge pump type 4E
RHEINSTROM deck wash and bilge pump type 4E
This self-priming bilge and deck wash pump is suitable for delivering sea water. It is completely made of bronze and stainless steel. Due to its hard-wearing industrial motor a longlasting and reliable operation is guaranteed. Before it is run for the first time it has to be filled with water. Furthermore it is advisable to install a socket safety valve or a foot operated valve into the suction pipe. The pump is non-reactive to sand (particle size up to 2 mm). The model 4 E is totally maintenance-free due to the use of a freely running impeller wheel and a very modern axial face seal. The max. operating time is 1 – 2 hoursTechnical dataOutput:50 l/minHeight pumped: 13 mSuction lift: 3 mAttachment: 3/4" BSP with inner threadsWeight: 7 kg

From €916.00 *
Details
Circulation pump LAING ECOCIRK D5 VARIO 8-24V
Circulation pump LAING ECOCIRK D5 VARIO 8-24V
Quality circulation pump, with shaftless DC ball motor and minimal energy draw through permanent magnet technology.This pump stands out for its compact dimensions, high efficiency, very low power draw and long life.Because it doesn't use conventional bearings, the pump is quiet and maintenance-free.Brass body with 1/2" inner threads, for water temperature < 95°C.The speed is adjustable to control feed.0,25 - 1,9A.For systems of 8 to 24 volt.Continuous running is possible.A plastic mount bracket must be ordered separately.

From €295.95 *
Details
Impeller pump JABSCO UTILITY-PUPPY 2000
Impeller pump JABSCO UTILITY-PUPPY 2000
Powerful impeller pump with bronze pump head and impeller made of nitrile rubber (oil-resistant), dry self-priming up to 1.20 m. Developed for pumping bilge water. Dry-running protection up to 20 minutes. Capacity 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), suitable for continuous operation.Dimensions 190x120x80 mm.Versions for 12V or 24V on-board voltage are available. Connection 3/4" (inside).

From €439.00 *
Details
Bronze Gear transfer pump MARCO UP3
Bronze Gear transfer pump MARCO UP3
Self-priming small feed pump with bronze gears, particularly suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Nickel-plated brass pump housing, stainless steel shaft. Suction height 1.5 m. Self-priming (not dry self-priming).Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3-S with integrated on/off switch or as transportable feed pump set MARCO UP3-CK. See under similar products.

From €164.90 *
Details

Last seen products

More articles from this category

Impeller pump JABSCO
Impeller pump JABSCO
Self-priming impeller pump with free shaft end. for socket mounting. Equipped with neoprene impeller for use as sea or fresh water pump.The pump housing is made of bronze, the axle with ball bearings is made of stainless steelThe details regarding the output refer to an input speed 1500 U/min and back pressure at 0.3 bar.

€269.00 *
Details
Centrifugal pump JABSCO
Centrifugal pump JABSCO
JABSCO centrifugal pumps CYCLONE are strong and durable pumps made from stainless steel, suitable as circulation pump for heating systems, ballast tank systems, cooling water or seawater, diesel or chemicals over a temperature range of +4° to 95°C.They are available as high efficiency pumps (type 50840) with up to 110 l/min power for continuous operation or as high pressure pumps (type 50860) for the temporally limited usage (30 min maximum) with pressure of up to 1,6 bar.Connection thread 3/4" BSP.Four rubber puffer pads in the base plate ensure a quite and vibration free operation.Centrifugal pumps are not self-priming, they must therefore be installed in such a way, that the flow of the pumped medium is guaranteed.

From €499.00 *
Details