To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Transfer pump set MARCO CK

4791*02 Mobile Förderpumpe MARCO UP3-CK

Transfer pump set MARCO CK

from €199.90*

€199.90*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

model

UP3-CK

voltage (V)

24

12

capacity

max. 15 l/min

L (mm)

205

B (mm)

167

H (mm)

140

Stk

Portable transfer pump set type MARCO CK for mobile use.
Complete with metal carrying case with plastic handle.
Integrated "on-off" switch, cables with fuse and battery clamps.

Self-priming electric pump type MARCO UP3, with bronze gears for transfer of various liquids.
Main applications: transfer of diesel fuel (day tank), water, antifreeze and oils of low viscosity.

Ports with brass connection for 3/8" inner tubing, with hose connectors for 14mm hose.
Self priming 1,5 m.
Comes with transparent plastic filter.

more information

Show 2 articles

📖 View article in the TOPLICHT catalogue

Art. No.	model	voltage (V)	capacity	L (mm)	B (mm)	H (mm)	Price (unit)	Delivery time	Note list	Buy

Downloads

PDF Manual IT/EN

Portable transfer pump set type MARCO CK for mobile use.
Complete with metal carrying case with plastic handle.
Integrated "on-off" switch, cables with fuse and battery clamps.

Self-priming electric pump type MARCO UP3, with bronze gears for transfer of various liquids.
Main applications: transfer of diesel fuel (day tank), water, antifreeze and oils of low viscosity.

Ports with brass connection for 3/8" inner tubing, with hose connectors for 14mm hose.
Self priming 1,5 m.
Comes with transparent plastic filter.

Questions about the product?

Accessories

Fuel hose

Nitrile rubber fuel hose for use with diesel or petrol, with outer textile covering.Applicable as pressure or suction hose.

From €7.90 *

PVC hose (food safe)

PVC hose (food safe)

Transparent PVC hose with cross-fabric insert of polyester yarn.Food safe, resistant to chemicals and oil.Temperature resistant from -5°C to +60°C.Also intended for pressurized water systems.

From €2.50 *

Hose clamp stainless steel

Hose clamp stainless steel

Solid stainless steel design - all pieces completely stainless.With hexagonal bolts for high torque, high tear resistance and elasticity.

From €1.80 *

Hose clamp stainless steel

Hose clamp stainless steel

Special hose clamps for fuel hoses.Made entirely of A2-stainless steel.10 pieces per pack.

From €18.70 *

Similar products

Bronze Gear transfer pump MARCO UP3

Bronze Gear transfer pump MARCO UP3

Self-priming small feed pump with bronze gears, particularly suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Nickel-plated brass pump housing, stainless steel shaft. Suction height 1.5 m. Self-priming (not dry self-priming).Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3-S with integrated on/off switch or as transportable feed pump set MARCO UP3-CK. See under similar products.

From €164.90 *

Bronze Gear transfer pump MARCO UP3-S with switch

Bronze Gear transfer pump MARCO UP3-S with switch

Small MARCO UP3-S feed pump with bronze gears and integrated, practical on/off switch. Suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Delivery rate 15 litres per minute.Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3 without switch or as transportable feed pump set MARCO UP3-CK. See under similar products.

From €185.00 *

Transfer pump

A patented intake valve eases the filling of various liquids, for example water, diesel, or gas.The liquid must only be higher than the container being filled, no more sucking with the mouth necessary.Comes with a 2m hose.

From €19.95 *

All-purpose manual pump REILANG RHP500UV

All-purpose manual pump REILANG RHP500UV

The all-purpose manual pump RHP500UV serves for emptying or filling-up with fluids, which do not affect aluminium or brass. Features: universally deployable, casing made of aluminium, smooth-running due to a special slip ring, displaced volume 555 ml, weight 576 g. A nozzle tube with lenght 200 mm and an inside diameter of 10 mm is part of the shipment.

€64.90 *

Shut-off valve GUIDI

Shut-off valve GUIDI

Made from seawater-proof bronze (Rg 7). Essential for the control of, for example, fuel or tank connections.Red-painted aluminum handle.A switch cable can be attached at the handle bore hole - with firmly ancored valve - in order to open or shut the flow rate.The angle of the lever is approx. 30°.

From €45.50 *

Semi-rotary pump from cast iron

Semi-rotary pump from cast iron

Extremely robust hand pump for pumping almost all liquids, even hot ones. The pump is well suited as an oil change and diesel pump. The pumps are not self-priming!The housing is completely made of cast iron and then varnished. The wings and valves are made of brass. The handle of the pump is made of wood (in the case of article 4626-010 the handle is made of varnished cast iron).On both sides there is an inch BSP female thread.Available with pump body made entirely of bronze on request.

From €119.00 *

Oil absorbent cloth ÖCUSORB

Oil absorbent cloth ÖCUSORB

These OECUSORB oil-absorbant cloths are made from polypropylene and can absorb up to 25 times their weight in oil and other organic liquids.Simple to handle, hydrophobic, floating, reusable and easy to dispose of. The cloths are ideal for soaking up oil from the bilges of small boats, but are also useful for many other tasks: protection of areas where oil or fuel could spill (for example, deck fills when fueling), water-polution control, cleaning motors and winches, etc.Comes as a cloth, dimensions 33 x 33 cm, weight approx. 30 g.

€3.50 *

Last seen products

More articles from this category

Oil drain pump 32x200mm

Oil drain pump 32x200mm

Made from oil-resistant plastic, pump cylinder of brass. Comes with 2 hoses. Dimensions: 32 mm x 200 mm. Discharge: 0.1 l/pump.

€25.95 *

Oil extractor

The see-through, robust container lets the user know how much oil has been extracted. A built-in float switch automatically stops extraction as soon as capacity is reached.With the pump housed inside the container, simply pump 5 to 10 times in a row to create a powerful vacuum. The integrated container (4,0 litres) then neatly captures the oil, preventing messy spills. The article is totally maintenance free and is shipped with two suction tubes D: 4,8 und D: 6,4mm, of 1,2 m length and an extension tube of 1,0 m length.

€89.95 *

Electric fuel pump HÜCO

Electric fuel pump HÜCO

Electric fuel pump that can be used to bring fuel to a stove if the primary tank is below the level of the fuel regulator and the installation of a day tank is not possible.This membrane pressure pump with electrically regulated electromagnetic works is maintenance-free and nearly wear-free.Data:- Dimensions: 73 x 128 mm,- Output: 120 l/h,- Pressure lift: 0.25 bar (max. 2,5 m),- Suction lift: -0.10 bar (max. 1,0 m),- Attachement fittings for hose 8 mm on both sides.

From €121.00 *

Semi-rotary pump from cast iron

Semi-rotary pump from cast iron

Extremely robust hand pump for pumping almost all liquids, even hot ones. The pump is well suited as an oil change and diesel pump. The pumps are not self-priming!The housing is completely made of cast iron and then varnished. The wings and valves are made of brass. The handle of the pump is made of wood (in the case of article 4626-010 the handle is made of varnished cast iron).On both sides there is an inch BSP female thread.Available with pump body made entirely of bronze on request.

From €119.00 *

Oil drain pump

Made entirely of brass.Comes with 2 mounting clamps and intake manifold (diameter = 6 mm, lenght = 370 mm).Inlet 4" inner threads and 2" outer threads.Dimensions: diameter = 29 mm, lenght = 200 mm.Output: 0.05 l/pump.Avaialble in brass (Ms) or chromed (Cr) designs.

From €89.00 *

Oil drain pump brass

Oil drain pump brass

Strong oil pump made entirely of brass.Typ A: intended for hose attachment with two mounting plates.Typ B: with thread M16 x 1,5.

From €49.00 *

Transfer pump

A patented intake valve eases the filling of various liquids, for example water, diesel, or gas.The liquid must only be higher than the container being filled, no more sucking with the mouth necessary.Comes with a 2m hose.

From €19.95 *

All-purpose manual pump REILANG RHP500UV

All-purpose manual pump REILANG RHP500UV

The all-purpose manual pump RHP500UV serves for emptying or filling-up with fluids, which do not affect aluminium or brass. Features: universally deployable, casing made of aluminium, smooth-running due to a special slip ring, displaced volume 555 ml, weight 576 g. A nozzle tube with lenght 200 mm and an inside diameter of 10 mm is part of the shipment.

€64.90 *

Self-priming gear pump for oil UP3/OIL MARCO

Self-priming gear pump for oil UP3/OIL MARCO

Self-priming (up to 1 m) gear pump for pumping oil and other liquids.Brass pump body with bronze gears.Supplied with two hose nozzles (12 mm), hose clamps and an adapter for plastic pipe (for suctioning used oil through the opening of the dipstick).With the suction pipe set, available separately as an accessory, used oil can be conveniently extracted through the dipstick opening on the engine block when changing the oil.Dimensions: D = 65, L = 140 mm, weight 1.4 kg.Capacity (with suction pipe 6/8/14mm): 20/60/330l/hType UP3/OIL-R is equipped with an integrated changeover switch that enables switching from emptying to filling.Also available as mobile complete kit OCK1 for oil pumping - see similar articles.

From €179.00 *

Suction pipe for oil change pump

Suction pipe for oil change pump

Accessory for MARCO oil-change gear pumps:The plastic oil-change suction tubes allow a simple vacuum for sucking old oil through the dipstick opening in the engine block.Included: set with two tubes, L = 80cm.Diameter D = 6mm and 8mm.

€19.90 *

Oil change kit MARCO OCK1

Oil change kit MARCO OCK1

Oil-change kit OCK1 for mobile use made by renowned pump manufacturer MARCO:Self-priming gear pump UP3/OIL for pumping oil and other liquids.Brass pump body with bronze gears.Comes with 2 hose nozzles (12mm), hose clamps, suction tubes, and an adaptor for the tube.Dimensions L x W x H: 138mm x 108mm x 89mmCapacity (suction pipe/hose diameter 6/8/13mm): 0.3/1/5.5 l/min.With the included suction tubing set, old oil can be removed comfortably through the dipstick hole in the engine block.Ready for attachment with cable and battery clamps, two tubes (6mm und 8mm) with fittings and matching hose nozzles.The pump kit is also available as model OCK1-R with an integrated switch. This reversible UP3/OIL-R pump may be used for filling and draining.Dimensions L x W x H: 180mm x 108mm x 89mm

From €169.00 *

Bronze Gear transfer pump MARCO UP3

Bronze Gear transfer pump MARCO UP3

Self-priming small feed pump with bronze gears, particularly suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Nickel-plated brass pump housing, stainless steel shaft. Suction height 1.5 m. Self-priming (not dry self-priming).Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3-S with integrated on/off switch or as transportable feed pump set MARCO UP3-CK. See under similar products.

From €164.90 *

Transfer pump set MARCO CK

Transfer pump set MARCO CK

Portable transfer pump set type MARCO CK for mobile use.Complete with metal carrying case with plastic handle.Integrated "on-off" switch, cables with fuse and battery clamps.Self-priming electric pump type MARCO UP3, with bronze gears for transfer of various liquids.Main applications: transfer of diesel fuel (day tank), water, antifreeze and oils of low viscosity.Ports with brass connection for 3/8" inner tubing, with hose connectors for 14mm hose. Self priming 1,5 m.Comes with transparent plastic filter.

From €199.90 *

Oil change gear pump UP8/RE MARCO

Oil change gear pump UP8/RE MARCO

Heavy duty gear pump. Ideal for oil change and transport of liquids of high viscosity.Self priming up to 1,5 m, not dry self priming.Weight 2,2 kg.With smart touch panel, allows reversing the pump for filling and draining.

€259.00 *

Bronze Gear transfer pump MARCO UP3-S with switch

Bronze Gear transfer pump MARCO UP3-S with switch

Small MARCO UP3-S feed pump with bronze gears and integrated, practical on/off switch. Suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Delivery rate 15 litres per minute.Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3 without switch or as transportable feed pump set MARCO UP3-CK. See under similar products.

From €185.00 *

Request sent successfully

Request wasn't send - a error occured. Please try again.