- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
-
Electrics & engine
- Batteries & accessories
- Onboard monitoring
- Onboard power systems
- Cables & accessories
- Network & NMEA2000
- Battery chargers
- Inverters & voltage converters
- Wind chargers, solar panels & fuel cells
- Electric engines
- Engine control & push pull cables
- Engine cooling & exhaust system
- Accessories for engines
- Fuel system
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping


WEMA Leakage Alarm
€54.95*
€54.95*
Prices incl. VAT plus shipping costs
Available, delivery time: 1 Tag
In stock
The WEMA water level alarm gives you an acoustic warning when the water level rises above the normal level, e.g. in the bilge.
The robust switch for the alarm is mounted in the bilge at a height where there is normally no water and connected to the buzzer included. If the water inside the sensor tube rises to 80 mm, the warning buzzer switches on.
Jamming of the float by foreign objects is impossible due to the surrounding V4A tube. The switching unit can be easily pulled out of the holder and cleaned. The durable design also includes the encapsulated electronics and a 3 m long connection cable with a cable cross-section of 2 x 0.75mm².
The switch can also be optionally connected to a signal lamp.
The maximum load capacity is 0.3 amps at 12 volts and 0.15 amps at 24 volts.
The water alarm is suitable for 12 and 24 volts.
Art. No. | description | Ø (mm) | height (mm) | Price (unit) | Delivery time | Note list | Buy |
---|
Downloads
The WEMA water level alarm gives you an acoustic warning when the water level rises above the normal level, e.g. in the bilge.
The robust switch for the alarm is mounted in the bilge at a height where there is normally no water and connected to the buzzer included. If the water inside the sensor tube rises to 80 mm, the warning buzzer switches on.
Jamming of the float by foreign objects is impossible due to the surrounding V4A tube. The switching unit can be easily pulled out of the holder and cleaned. The durable design also includes the encapsulated electronics and a 3 m long connection cable with a cable cross-section of 2 x 0.75mm².
The switch can also be optionally connected to a signal lamp.
The maximum load capacity is 0.3 amps at 12 volts and 0.15 amps at 24 volts.
The water alarm is suitable for 12 and 24 volts.
Accessories
Last seen products
More articles from this category