SUPERWIND 350 und 350-II Wind Turbine
SUPERWIND Windgenerator 350 und 350-II
SUPERWIND Windgenerator 350 und 350-II
SUPERWIND Windgenerator 350 und 350-II
3975-101 Ersatz Rotorblätter-Set
3975-100 Stop-Schalter
3975-100 Stop-Schalter
3976-012 Laderegler
SUPERWIND 350 und 350-II Wind Turbine
from €669.00*
€119.00*
Prices incl. VAT plus shipping costs
Available, delivery time: 1 Tag
In stock
A wind generator that has proven its quality, reliability and performance on yachts, ships and on shore for almost 20 years. This generator delivers energy autonomously and unattended even under extreme conditions. Perfectly matched components result in an overall system of highest operational safety and reliability.
Similar to a large wind turbine, the SUPERWIND 350 adjusts its rotor blades, thus limiting aerodynamic loads where they occur, directly on the rotor. High loads on the entire structure are avoided and the service life is increased. The control mechanism is fully integrated into the hub and thus protected against environmental influences.
The SUPERWIND Type 350-II features even better bearing technology, making it suitable for very rough sites. The patented, fully synchronized rotor hub ensures a very high turbulence resistance and, together with the optimized rotor bearing, increases stability and durability.
Combination with solar systems is possible.
Available for 12V, 24V and 48 on-board power supply.
The optional stop switch is used to electromechanically stop the wind generator if it is not to be operated or if the rotor is to be prevented from starting. When used on sailing yachts, the installation of the stop switch is strongly recommended in order to be able to shut down the Superwind at sea in extreme weather.
The charge controller, which must be ordered separately, also includes the load resistors that dissipate excess energy when the battery is fully charged.
A mounting spigot for a 1 1/2" pipe mast (inner diameter = 44.3 mm) and an adapter sleeve for a 2" pipe (with different inner diameters) are included.
Technical data
- Rated power 350 W
- Nominal wind speed 12,5 m/s
- switch-on wind speed 3.5 m/s
- shut-off wind speed none
- rotor diameter 1.22 m
- Number of blades 3
- Rotor blade material CFRP
- speed 500 - 1300 rpm
- Generator Permanent magnet, 3-phase with rectifier, neodymium magnets
- Rated voltage Available in 12 V DC , 24 V DC and 48 V DC
- speed and power control Rotor blade pitch control, fully synchronized
- main brake generator short circuit
- total mass 11.5 kg
- Rotor thrust, operation 70 N
- rotor thrust, extreme gust 220 N
Downloads
A wind generator that has proven its quality, reliability and performance on yachts, ships and on shore for almost 20 years. This generator delivers energy autonomously and unattended even under extreme conditions. Perfectly matched components result in an overall system of highest operational safety and reliability.
Similar to a large wind turbine, the SUPERWIND 350 adjusts its rotor blades, thus limiting aerodynamic loads where they occur, directly on the rotor. High loads on the entire structure are avoided and the service life is increased. The control mechanism is fully integrated into the hub and thus protected against environmental influences.
The SUPERWIND Type 350-II features even better bearing technology, making it suitable for very rough sites. The patented, fully synchronized rotor hub ensures a very high turbulence resistance and, together with the optimized rotor bearing, increases stability and durability.
Combination with solar systems is possible.
Available for 12V, 24V and 48 on-board power supply.
The optional stop switch is used to electromechanically stop the wind generator if it is not to be operated or if the rotor is to be prevented from starting. When used on sailing yachts, the installation of the stop switch is strongly recommended in order to be able to shut down the Superwind at sea in extreme weather.
The charge controller, which must be ordered separately, also includes the load resistors that dissipate excess energy when the battery is fully charged.
A mounting spigot for a 1 1/2" pipe mast (inner diameter = 44.3 mm) and an adapter sleeve for a 2" pipe (with different inner diameters) are included.
Technical data
- Rated power 350 W
- Nominal wind speed 12,5 m/s
- switch-on wind speed 3.5 m/s
- shut-off wind speed none
- rotor diameter 1.22 m
- Number of blades 3
- Rotor blade material CFRP
- speed 500 - 1300 rpm
- Generator Permanent magnet, 3-phase with rectifier, neodymium magnets
- Rated voltage Available in 12 V DC , 24 V DC and 48 V DC
- speed and power control Rotor blade pitch control, fully synchronized
- main brake generator short circuit
- total mass 11.5 kg
- Rotor thrust, operation 70 N
- rotor thrust, extreme gust 220 N
Accessories
More articles from this category
