The external temperature sensor for the SCR charge controllers from SUPERWIND ensures optimum adjustment of the charge termination voltage of the charge controller.

A wind generator that has proven its quality, reliability and performance on yachts, ships and on shore for almost 20 years. This generator delivers energy autonomously and unattended even under extreme conditions. Perfectly matched components result in an overall system of highest operational safety and reliability.Similar to a large wind turbine, the SUPERWIND 350 adjusts its rotor blades, thus limiting aerodynamic loads where they occur, directly on the rotor. High loads on the entire structure are avoided and the service life is increased. The control mechanism is fully integrated into the hub and thus protected against environmental influences.The SUPERWIND Type 350-II features even better bearing technology, making it suitable for very rough sites. The patented, fully synchronized rotor hub ensures a very high turbulence resistance and, together with the optimized rotor bearing, increases stability and durability.Combination with solar systems is possible.Available for 12V, 24V and 48 on-board power supply.The optional stop switch is used to electromechanically stop the wind generator if it is not to be operated or if the rotor is to be prevented from starting. When used on sailing yachts, the installation of the stop switch is strongly recommended in order to be able to shut down the Superwind at sea in extreme weather.The charge controller, which must be ordered separately, also includes the load resistors that dissipate excess energy when the battery is fully charged.A mounting spigot for a 1 1/2" pipe mast (inner diameter = 44.3 mm) and an adapter sleeve for a 2" pipe (with different inner diameters) are included.Technical dataRated power 350 WNominal wind speed 12,5 m/sswitch-on wind speed 3.5 m/sshut-off wind speed nonerotor diameter 1.22 mNumber of blades 3Rotor blade material CFRPspeed 500 - 1300 rpmGenerator Permanent magnet, 3-phase with rectifier, neodymium magnetsRated voltage Available in 12 V DC , 24 V DC and 48 V DCspeed and power control Rotor blade pitch control, fully synchronizedmain brake generator short circuittotal mass 11.5 kgRotor thrust, operation 70 Nrotor thrust, extreme gust 220 N

Lightweight robust generator with high energy output (420 watts at 12 volts) and effective start-up even in light winds (from 2.2 m/s).Hand-laminated rigid carbon rotor blades ensure extremely quiet running in almost maintenance-free continuous operation.The body and wind vane are made of powder-coated seawater-resistant aluminum.Via bluetooth connection, all relevant operation parameters, the amount of energy charged and additionally the consumption of the connected users can be displayed in Ah on an external device (smartphone or tablet)..Included in delivery:External MPPT hybrid charge controller (220 x 150 x 82 mm, weight 2.6 kg) with connection for solar panels (up to 300 Wp), with integrated electronic stop switch and external antenna for good Bluetooth connection.Rotor diameter: 1150 mm.Circle of rotation: 1170 mm.Length: 650 mm.Weight: 6.8 kg.Suitable for a mast with an outer diameter of 48.3 mm.A mounting kit and replacement rotor blades are available.

Mounting kits for the mast (outer diameter 48,3mm), each consisting of a mast base (folding or rigid), two mast brackets and two deck fittings made from stainless steel.