Filter products now
from
109 €
to
339 €
Filter products now
from
109 €
to
339 €
Manufacturer Navigation
Our brands from A-Z
-
(177)
S & B Beschläge
-
(8)
Salamander
-
(33)
Schatz
-
(3)
Scotch
-
(1)
Sea-Line
-
(10)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(38)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(3)
Separ
-
(4)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(13)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(2)
Skylotec
-
(5)
Solara
-
(2443)
Sonstige Hersteller
-
(12)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(12)
Stazo
-
(5)
Steiner
-
(5)
STELTON
-
(22)
Sterling
-
(11)
Sundström
-
(2)
Sunnex
-
(1)
Superwind
Products from GME
2 products
GME water pressure release HRU Replacement Kit for EPIRB
€109.00 *
GME HRU Replacement Kit.The kit was specially developed for replacement in EPIRBs from the Australian manufacturer GME. It consists of the hydrostatic water pressure release (HRU) from Hammar (H20E), the standard safety bolt (this must be replaced every time the release is replaced!), seals, screws and a safety clip with cord.The replacement kit is suitable for all GME EPIRB models.Before installation, the HRU must be marked with the corresponding approval period of two years (from installation).If the ship sinks, a spring-loaded blade in the HRU cuts through the safety bolt at a water depth of 1.5 - 4 metres, allowing the EPIRB to float freely.
GME MT610G PLB ACCUSAT
€339.00 *
The MT610G is a very compact, lightweight PLB (Personal Locator Beacon) from the Australian manufacturer GME.It transmits the emergency alarm including the exact GPS position via Cospas-Sarsat (406 MHz). The 121.5 MHz frequency is also used for homing.Before delivery, the MMSI of your ship must be programmed into the EPIRB. To do this, please select the initial programming (Article-No. 3957-000) under "Accessories" further down on this page. In the last step of the order process, you can enter the required ship data under "Remarks": Ship name, MMSI, IMO no., call sign, flag. Would you like to use the PLB on different yachts or in a sea kayak? Then you can alternatively register the emergency beacon in the UK using the device's own ID number. The number and details of the corresponding homepage are enclosed with the device. If you want the PLB without programming the MMSI, please indicate this under "Remarks" in your order. The device is activated by switching it on manually. The emergency signal is transmitted after 30 seconds at the earliest. No warm-up time is required due to the digital frequency conditioning. The device automatically carries out an extensive internal test and informs you of the result via LED displays.Technical dataCompact, lightweight designEasily recognisable yellow housing colourSwimmableDust and waterproof according to IP68 protection classEasy to operate even with clammy fingersCospas-Sarsat certified (class 2)121.5 MHz for homingIntegrated 72-channel GPS receiverLED flash with 20 flashes/minute (>0.75 cd)Operating time at least 24 hours at -20° C (longer at higher temperatures)Battery life 7 years - no later than the expiry date printed on the battery. Replacement must be carried out by a service centre6-year guaranteeDimensions: HxWxD 88 x 66 x 36 mmWeight: 180 gScope of deliveryMT610G PLB LanyardInstruction manualQuick start guide
