- Rigg & sail
- Rope & cordage
- Anchoring & mooring
-
Hull & deck
- Sheet winches & halyard winches
- Cleats & stoppers
- Tracks & slides
- Chain plates & stemhead fittings
- Pad eyes & fairleads
- Hooks & eyelets
- Hand rails
- Flags & flagstaffs
- Portlights & hatches
- Ventilation
- Steering wheels, tillers & rudders
- Specialities for motorboats
- Dinghys & rowboats
- Letters & plates
- Navigation lights
- Outdoor lights & deck spots
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
















€26.70*
€26.70*
Prices incl. VAT plus shipping costs
Available, delivery time: 1 Tag
In stock
The cleat holds ropes securely yet will release them immediately when the cleat is overloaded. Once tripped, it can be easily reset in seconds by just pushing the cleat back down into its base.
The CL257 is also fitted with an adjustable cam so that the release tension can be set to suit the boat's conditions.
The cam is adjusted until the rudder blade is held down reliably under maximum sailing conditions.
The CL257 will then be set so that the least strain is put on the rudder if it hits an obstacle.
The CL257 can be fitted to virtually all lifting tillers and can also be used to protect centre boards .
Manufactured from anodised aluminium and acetal.
These practical cleats, which were developed in England over 40 years ago,
have become indispensable in sailing, line-working, and seamanship.
Since then, CLAMCLEAT® has produced more than 200 various models and designs,
not only for sailing, surfing, or hang-gliding, but also for many aspects of daily life.
Art. No. | model | for rope (mm) | Price (unit) | Delivery time | Note list | Buy |
---|
Downloads
The cleat holds ropes securely yet will release them immediately when the cleat is overloaded. Once tripped, it can be easily reset in seconds by just pushing the cleat back down into its base.
The CL257 is also fitted with an adjustable cam so that the release tension can be set to suit the boat's conditions.
The cam is adjusted until the rudder blade is held down reliably under maximum sailing conditions.
The CL257 will then be set so that the least strain is put on the rudder if it hits an obstacle.
The CL257 can be fitted to virtually all lifting tillers and can also be used to protect centre boards .
Manufactured from anodised aluminium and acetal.
These practical cleats, which were developed in England over 40 years ago,
have become indispensable in sailing, line-working, and seamanship.
Since then, CLAMCLEAT® has produced more than 200 various models and designs,
not only for sailing, surfing, or hang-gliding, but also for many aspects of daily life.
Last seen products
More articles from this category