- Rigg & sail
- Rope & cordage
- Anchoring & mooring
-
Hull & deck
- Sheet winches & halyard winches
- Cleats & stoppers
- Tracks & slides
- Chain plates & stemhead fittings
- Pad eyes & fairleads
- Hooks & eyelets
- Hand rails
- Flags & flagstaffs
- Portlights & hatches
- Ventilation
- Steering wheels, tillers & rudders
- Specialities for motorboats
- Dinghys & rowboats
- Letters & plates
- Navigation lights
- Outdoor lights & deck spots
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Wooden burgee holder for dutch flat-bottom boats












Wooden burgee holder for dutch flat-bottom boats
€34.50*
€34.50*
Prices incl. VAT plus shipping costs
Available, delivery time: 1 Tag
In stock
Wooden burgee holder for the traditional burgee (Vleugel) on dutch flat-bottom boats.
Varnished wood.
Lenght = 500 mm.
A copper tube attached with screws serves as bearing:
inside D = 12 mm, L = aprrox. 65 mm.
Wooden burgee holder (Vleugel holder) is used to keep the traditional wind vane - the Vleugel, free of blocks and halyards on Dutch flat-bottomed ships. The vleugel is lashed or sewn to the vleugel wood. A round rod with a diameter of 10 mm is needed as an axle on the mast.
Our burgee holder is made of ash wood and pre-varnished. Holes are provided for sewing on the Vleugel. A copper tube screwed on with clamps serves as a bearing.
Length of the wooden ball: 500 mm.
Copper tube bearing: inner diameter 12 mm, height approx. 75 mm.
Art. No. | description | L (mm) | Price (unit) | Delivery time | Note list | Buy |
---|
Wooden burgee holder for the traditional burgee (Vleugel) on dutch flat-bottom boats.
Varnished wood.
Lenght = 500 mm.
A copper tube attached with screws serves as bearing:
inside D = 12 mm, L = aprrox. 65 mm.
Wooden burgee holder (Vleugel holder) is used to keep the traditional wind vane - the Vleugel, free of blocks and halyards on Dutch flat-bottomed ships. The vleugel is lashed or sewn to the vleugel wood. A round rod with a diameter of 10 mm is needed as an axle on the mast.
Our burgee holder is made of ash wood and pre-varnished. Holes are provided for sewing on the Vleugel. A copper tube screwed on with clamps serves as a bearing.
Length of the wooden ball: 500 mm.
Copper tube bearing: inner diameter 12 mm, height approx. 75 mm.
Similar products
Last seen products
More articles from this category