Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Lamp boards teak (pairs)

€89.00*

Content: 1

€89.00*

Content: 1 Stück

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

version
length (mm)
width (mm)
height (mm)
strength (mm)
Paar

Solidly made nav-light boards made from untreated teak, grooved, epoxied, fastened, grafted, and cleanly sanded.
Suitable for protecting the lamp and as a glare shield.
Compatible with nav-lights PB410, PB420, and AQUA SIGNAL 40.

The boards are shipped in pairs (1 x port, 1 x starboard!

Show article
📖 View article in the TOPLICHT catalogue


Solidly made nav-light boards made from untreated teak, grooved, epoxied, fastened, grafted, and cleanly sanded.
Suitable for protecting the lamp and as a glare shield.
Compatible with nav-lights PB410, PB420, and AQUA SIGNAL 40.

The boards are shipped in pairs (1 x port, 1 x starboard!

Questions about the product?

Last seen products

More articles from this category

Navigation light control gaff rigged cutter
Navigation light control gaff rigged cutter
With the electronic position light monitoring - an exclusive TOPLICHT design for traditional ships - the failure of a bulb or LED in a navigation light or a wiring break is shown. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which may be acknowledged by pushing a key. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly. Measurements of the display: (B x H) 110 x 145 mm, measurements of the electronics:(B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *
Details
Navigation light control sailing yacht
Navigation light control sailing yacht
The electronic position light monitoring indicates the failure of a bulb or LED in a navigation light or a wiring failure. Up to 6 lights can be monitored (starboard / port, steaming, stern, anchor and tricolour masttop light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which can be acknowledged by pushing a key, until the problem is fixed. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection is mounted behind the aluminium display-plate. Measurements of the display: (B x H) 110 x 145 mm. Measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *
Details
Navigation light control ketch
Navigation light control ketch
With the electronic position light monitoring the failure of a bulb or LED in a navigation light or a wiring break is indicated. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly.Measurements of the display: (B x H) 110 x 145 mm, measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *
Details
Navigation light control motor yacht
Navigation light control motor yacht
With the electronic position light monitoring the failure of a bulb or LEDin a navigation light or a wiring break is indicated. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly.Measurements of the display: (B x H) 145 x 115 mm, measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *
Details
Lamp boards teak (pairs)
Lamp boards teak (pairs)
Solidly made nav-light boards made from untreated teak, grooved, epoxied, fastened, grafted, and cleanly sanded.Suitable for protecting the lamp and as a glare shield.Compatible with nav-lights PB410, PB420, and AQUA SIGNAL 40. The boards are shipped in pairs (1 x port, 1 x starboard!

€89.00 *
Details
3230-100 Ersatz-Elektroeinsatz für PB410
Spare parts for navigation lights PB 410
Lenses and seals are available as replacement parts for our sturdy and durable PETERS & BEY navigation lights, so these lanterns can remain functional for decades. Poycarbonate lenses of navigationlights can become brittle and dull after years of UV exposure, so replacing the lenses may be advisable. The lenses come with four pop rivets, and the seal kit includes two soft rubber seals. The electrical insert with bayonet socket is also replaceable.

From €5.00 *
Details
Mounting bracket for PB420 / PB410 lamps
Mounting bracket for PB420 / PB410 lamps
Stainless steel mounting kit for Peters & Bey navigation lanterns type PB420 and PB410. The bracket is mounted on the rear wall of the lantern and can be firmly locked with the slip-on hook mounted on the boat.Supplied without lantern.

€41.00 *
Details
Mounting for PB 410
Mounting for PB 410
Mounting bracket for PB 410 navigation lights.Inox.Short or long version available.

From €14.95 *
Details
Mounting plate upright for navigation lights PB
Mounting plate upright for navigation lights PB
Mounting accessory and spare parts for PB lights:

€48.00 *
Details
Socket BaY15d for navigation lights PB 400
Socket BaY15d for navigation lights PB 400
Mounting accessory and spare parts for PB lights:

€15.90 *
Details
Spare glass for all-round light FORESTI
Spare glass for all-round light FORESTI
Replacement glass for the all-round light (Art-Nr. 3245-...). FORESTI & SUARDI Lights. Coming from a crafts business, established in 1961, the north Italian brass foundry FORESTI &SUARDI Has become a modern industrial company that hasn't forgot about its traditional roots. Nowadays FORESTI manufactures all kinds of boat fittings, ship windows, sanitary accessories, interior fittings And especially a wide range of high quality lights for the use on ships but also on land.

€16.51 *
Details
NAVISAFE NAVILIGHT 360 Accessories
NAVISAFE NAVILIGHT 360 Accessories
The specially designed brackets enable easy and versatile mounting options of the Navilight LED-light on almost every surface.The pole mount consists of four parts and can be screwed together to form a 1 m long light pole. An adapter is included for mounting the Navilight with a magnetic base.The suction cup mount with flexible arm can be mounted horizontally as well as vertically and fits Navilight lights with magnet.The railing mount can be attached to tubes with a diameter of approx. 25 mm and can be swiveled 180°. the mount consists of a metal plate for the Navilight with magnetic base.All accessories come without the Navilight, you can find it under "accessories".

From €25.00 *
Details
HELLA NaviLED PRO Deck Mounting Adapter
HELLA NaviLED PRO Deck Mounting Adapter
With the deck mount adapter, HELLA Pro series navigation lights can also be installed on horizontal surfaces. It allows for more mounting options, as well as raising the height of the navigation light by 50%.Suitable for the port, starboard, stern, and top version. Innovative design makes the mounting adapter invisible. The adapter is available in black or white to match the navigation lights.

From €27.00 *
Details
DHR 35 wind-indicator adapter
DHR 35 wind-indicator adapter
Adapter for wind indicator suitable for navigation light series DHR 35.

€14.90 *
Details
3336*04 DHR 35 Montage-Adapter
DHR 35 Mounting Adapter
Original adapter feet from DEN HAAN ROTTERDAM for the navigation and signal lights of the 35 series. With the adapters all lanterns - except the heatable version - can be converted. The mast and angle adapters are made of seawater-resistant stainless steel, the foot base and the tube adapter are made of robust plastic. The adapters are simply screwed onto the lantern from below with a plastic ring.

From €55.00 *
Details
Replacement socket for DHR35 position lanterns with BaY15d b
Replacement socket for DHR35 position lanterns with BaY15d b
Replacement socket with BaY15d base as spare part for DHR35 position lanterns.Wire end ferrules (e.g. item no. 4364-002) are required for connection to stranded cable (e.g. item no. 2213-115). 

€25.00 *
Details