To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Small LED-Anchor Lights

Small LED-Anchor Lights

from €33.00*

€33.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

model

ancor

body

black

white

angle (°)

360

range (nm)

2

Stk

Small anchor lantern consisting of a waterproof LED light unit and a Quickfit base for mounting on horizontal surfaces or on the mast. The lens and housing are made of robust plastic and are bonded together in a watertight manner. The unit is screwed to the Quickfit base using a bayonet thread. There are three drill holes on the underside for mounting and a feed-through for the cables. A rubber sleeve seals the anchor light watertight to the outside.

The anchor light has no national approval and is only suitable for vessels up to and including 12 m in length. Complies with COLREG and USCG regulations for 2sm / 12V / A-16.

Available in black or white housing.

Voltage: 12V
Protection class IP66
Dimensions: Ø x H: 62 mm x 62 mm

more information

Show 2 articles

Art. No.	model	body	angle (°)	range (nm)	Price (unit)	Delivery time	Note list	Buy

Small anchor lantern consisting of a waterproof LED light unit and a Quickfit base for mounting on horizontal surfaces or on the mast. The lens and housing are made of robust plastic and are bonded together in a watertight manner. The unit is screwed to the Quickfit base using a bayonet thread. There are three drill holes on the underside for mounting and a feed-through for the cables. A rubber sleeve seals the anchor light watertight to the outside.

The anchor light has no national approval and is only suitable for vessels up to and including 12 m in length. Complies with COLREG and USCG regulations for 2sm / 12V / A-16.

Available in black or white housing.

Voltage: 12V
Protection class IP66
Dimensions: Ø x H: 62 mm x 62 mm

Questions about the product?

Last seen products

More articles from this category

Navigation light control gaff rigged cutter

Navigation light control gaff rigged cutter

With the electronic position light monitoring - an exclusive TOPLICHT design for traditional ships - the failure of a bulb or LED in a navigation light or a wiring break is shown. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which may be acknowledged by pushing a key. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly. Measurements of the display: (B x H) 110 x 145 mm, measurements of the electronics:(B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

Navigation light control sailing yacht

Navigation light control sailing yacht

The electronic position light monitoring indicates the failure of a bulb or LED in a navigation light or a wiring failure. Up to 6 lights can be monitored (starboard / port, steaming, stern, anchor and tricolour masttop light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which can be acknowledged by pushing a key, until the problem is fixed. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection is mounted behind the aluminium display-plate. Measurements of the display: (B x H) 110 x 145 mm. Measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

Navigation light control ketch

Navigation light control ketch

With the electronic position light monitoring the failure of a bulb or LED in a navigation light or a wiring break is indicated. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly.Measurements of the display: (B x H) 110 x 145 mm, measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

Navigation light control motor yacht

Navigation light control motor yacht

With the electronic position light monitoring the failure of a bulb or LEDin a navigation light or a wiring break is indicated. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly.Measurements of the display: (B x H) 145 x 115 mm, measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

Motorboat mast

Laminated quality, built of mahogany and ash, varnished. With spreaders and knob at the top (D = 110 mm), as well as an interior notch for the cable run. Four-sided foot 140 x 50 mm. Matching stainless steel mast foot Article-No. 1254-000.

From €284.00 *

Motorboat mast base

Motorboat mast base

Stainless steel mast base to be screwed to the deck.

€168.00 *

Lamp boards teak (pairs)

Lamp boards teak (pairs)

Solidly made nav-light boards made from untreated teak, grooved, epoxied, fastened, grafted, and cleanly sanded.Suitable for protecting the lamp and as a glare shield.Compatible with nav-lights PB410, PB420, and AQUA SIGNAL 40. The boards are shipped in pairs (1 x port, 1 x starboard!

€89.00 *

DHR Anchor / Signalling Light

DHR Anchor / Signalling Light

Navigation lantern from the professional maritime industry with international certification.Originally developed for shipboard use, these position lanterns are still used on traditional ships when a classic look is required. Made of corrosion-resistant brass or copper sheet. They are also excellent for decoration and atmospheric lighting at home.The burner size of kerosene lamps is traditionally measured with the dimension "-linig" (short: ''' ). Please click on "Downloads & Information" to get an impression of the light intensity of the petroleum lamps.The lantern is supplied with two hanging brackets, a round kerosene burner with a wick and a short lamp cylinder 10''' (item no. 4130-110). The brass housing is painted black, with a 6" glass fresnel all-around lens. The top can be opened.Tank capacity: 0.3 l for approx. 30 hours burning time. Weight 3.5 kg.

€249.00 *

DHR Navigation lights 4" made from copper

DHR Navigation lights 4" made from copper

Originally developed for onboard use, these navigation lights are still used on traditional ships, when classic optics are needed. Also intended for use as atmospheric lighting at home. These lamps are made from corrosion-free copper sheeting.However, lamps from DEN HAAN ROTTERDAM have no official approval and are not intended as navigation lights on ships!Available in paraffin or electric designs, these small, polished copper-plate lamps with 4-inch fresnel glass lenses are available in the following designs:Paraffin anchor light: burner with 125 ml brass tank for approx. 40 hours of burning and 5'''- Perkeo cylinder. Electric anchor light:E14 socket, cord entry from the top, frosted-glass, without cylinder. Paraffin side and masthead lights: with 50 ml tank for approx. 15 hours of burning time. Electric side and masthead lights: with cord, switch, plug, und socket on the floor, without cylinder. Paraffin lamps are a sensible alternative or addition to electric lighting. They give off a warm, cozy and, at similar sizes, equally bright light.The burner size on paraffin lamps is traditionally given in candlepower (shortened to ''').

From €192.00 *

DHR Anchor lights 5" made from brass

DHR Anchor lights 5" made from brass

Anchor lantern from the professional maritime industry with international certification (not BSH certified).Brass housing, painted gray, with a 5" glass fresnel all-around lens.The top opens. Comes with 2 hanging brackets.Available designs:Paraffin (kerosene) design: burner with 0.3 l tank for approx. 40 hours of burning time. Comes with 6'''- lamp cylinder.Electric design: E27 socket, max 40 W, without cylinder. Cord entrance from the top, the bottom has a white plastic lens that allows light to shine below.Originally developed for onboard use, these navigation lights are still used on traditional ships, when classic optics are needed. Also intended for use as atmospheric lighting at home. However, lamps from DEN HAAN ROTTERDAM have no official approval and are not intended as navigation lights on ships!

From €236.00 *

DHR Navigation lights 7" made from brass

DHR Navigation lights 7" made from brass

Sturdy anchor lantern from DEN HAAN ROTTERDAM, for the professional maritime industry with international certification (not BSH certified). Brass housing, painted gray, with a 7" glass fresnel all-around lens.Available in the following designs:Paraffin (kerosene): 10''' round burner with 0.85 l tank for approx. 60 hours of burning time. Electric: E37 socket, max 60 W. Cord entry from above. The white plastic bottom allows the light to also shine down. No cylinder.Originally developed for onboard use, these navigation lights are still used on traditional ships, when classic optics are needed. Also intended for use as atmospheric lighting at home. However, lamps from DEN HAAN ROTTERDAM have no official approval and are not intended as navigation lights on ships!

From €399.00 *

DHR Navigation lights 6" made from brass

DHR Navigation lights 6" made from brass

Polished, lacquered plate-brass lantern with 6" glass fresnel lens. Originally developed for onboard use, these navigation lights are still used on traditional ships, when classic optics are needed. Also intended for use as atmospheric lighting at home. However, lamps from DEN HAAN ROTTERDAM have no official approval and are not intended as navigation lights on ships!Available in the following designs:Paraffin (kerosene): 10''' lamp cylinder and round burner with 0.3 l tank for approx. 30 hours. Electric: E37 socket, max 60 W. Anchor lantern with cord entry from above and white plexiglass floor. Lanterns with the cord entry on the back and socket on the bottom are also available. No cylinder.These lanterns are not certified for use as navigation lights on seagoing vessels.Paraffin lamps are a sensible alternative or addition to electric lighting. They give off a warm, cozy and, at similar sizes, equally bright light.The burner size on paraffin lamps is traditionally given in candlepower (shortened to ''').

From €251.00 *

DHR Navigation lights 8" made from copper

DHR Navigation lights 8" made from copper

Large lantern made of polished, treated copper plate with 8" glass Fresnel lens. Originally developed for onboard use, these navigation lights are still used on traditional ships, when classic optics are needed. Also intended for use as atmospheric lighting at home. However, lamps from DEN HAAN ROTTERDAM have no official approval and are not intended as navigation lights on ships!The following designs are available.Paraffin (kerosene): 14''' lamp cylinder and round burner with 0.85 l tank for approx. 65 hours of burning time. Electric: E27 socket, max 100 W. Cord switch and plug. No cylinder.Paraffin lamps are a sensible alternative or addition to electric lighting. They give off a warm, cozy and, at similar sizes, equally bright light.The burner size on paraffin lamps is traditionally given in candlepower (shortened to '''). Please click on "Downloads & Information" to get a feel for the light strength of paraffin lamps.

From €444.00 *

DHRAnchor light with wall mounting

DHRAnchor light with wall mounting

Robust 4" (E14) or 6" (E27) anchor lamp, made from lacquered plate brass from DEN HAAN ROTTERDAM. For wall mounting with sturdy screwed-in round cast-brass wall bracket. The clear fresnel lens and matte glass bottom ensure good light distribution. Originally developed for onboard use, these navigation lights are still used on traditional ships, when classic optics are needed. Also intended for use as atmospheric lighting at home.Electric:E14 or E27 socket.Direct connection to the wall bracket, no switch.

From €199.00 *

DHR Propane navigation light

DHR Propane navigation light

The running lights DHR70 with propane gas burner are sturdy traditional navigation lanterns intended for use on ships that for instance are towed or laid up for a longer period of time on a mooring near a fairway.The body is made from galvanized sheet metal, painted black with Fresnel lenses made from glass.The propane burner with integrated pressure regulator (140 mbar) reaches the necessary brightness utilizing a glow unit for gas lamps.The lanterns are licenced for unmanned ships of all ship sizes. Each unit is shipped with a certificate with a serial number.The gas consumption amounts to approx. 19 g/h.Additional accessories like gas bottles, bottle regulators or hoses for LPG are available.

€578.00 *

3230-023 2-Farben Laterne PB 410 Edelstahl

Navigation light PB 410 stainless steel

The PB 410 navigation light series is manufactured by the Hamburg based company PETERS & BEY, with a sturdy housing made of matte stainless steel and lenses made of polycarbonate plastic. Intended for stern mounting on the supplied slip-on hook.MED approval for vessels up to 20m length. Supplied without bulb. Light source socket BaY15d. Accessories such as various mounting plates, interchangeable angles and spare parts such as lenses, sockets are available.

€269.00 *

BSH certificate

3230-100 Ersatz-Elektroeinsatz für PB410

Spare parts for navigation lights PB 410

Lenses and seals are available as replacement parts for our sturdy and durable PETERS & BEY navigation lights, so these lanterns can remain functional for decades. Poycarbonate lenses of navigationlights can become brittle and dull after years of UV exposure, so replacing the lenses may be advisable. The lenses come with four pop rivets, and the seal kit includes two soft rubber seals. The electrical insert with bayonet socket is also replaceable.

From €5.00 *

BSH certificate

Navigation lights AQUA SIGNAL 50 stainless steel

Navigation lights AQUA SIGNAL 50 stainless steel

Aqua signal navigation lights series 50, classic model made of stainless steel,with shock-resistant optics. At a glance:Approved for boats: up to 20 m.Approvals: USCG, IMO, CE, BSH.Electric: with 2 wire lead, cable entry PG 9. Bulb is included.Voltage: 12 V.

€138.00 *

Copper Navigation Lights PB422Cu

Copper Navigation Lights PB422Cu

The navigation lights of the PB CLASSIC series were developed exclusively for TOPLICHT.The housing is manufactured at the PETERS & BEY lamp factory in Hamburg from matte copper sheet, the traditional material for position lanterns. It can be polished on board or left to weather naturally. The lens is made of impact resistant polycarbonate.Mounting options: The lantern can be permanently mounted with four screws over the black plastic backplate or removably mounted with the optional stainless steel mounting kit (Art.No. 3233-100) .Lamp socket BaY 15 d. Supplied without bulb.MED approval for ships up to 20 m in length.

From €199.00 *

Navigation lights PB420

Navigation lights PB420

High-quality navigation lights from the Hamburg-based manufacturer PETERS & BEY with MED approval for vessels up to 20m in length.The housing is made of black plastic, the lenses are made of impact resistant polycarbonate with stainless steel bezels. The lantern can be permanently mounted on the back wall with four screws or removably mounted with the mounting kit (item no. 3233-100).Socket: BaY15d, delivery without light bulb.Suitable for 12/24 V on-board power supply, 25W (rear lantern 10W).

From €130.00 *

Request sent successfully

Request wasn't send - a error occured. Please try again.