Navigation lights PB500 | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Art. No.	model	colour	angle (°)	range (nm)	Price (unit)	Delivery time	Note list	Buy

MED approval for vessels up to 50 m in length, unlimited in inland navigation.

The waterproof black housing as well as the lenses are made of plastic, the inner parts and orifices are made of stainless steel. Supplied with 1.2m installed cable. Bulb replacement is easily done from the top by flipping open the housing cover.

Hole spacing on the mounting plate: 120 x 120mm.

Protection class: IP56 Socket: BaY15d
Supplied without light source.

Supplied without bulb.

Questions about the product?

Accessories

BSH certificate

Bulb for navigation light BaY15d 12 v / 24 v

Bulb for navigation light BaY15d 12 v / 24 v

Bulb for navigation light / postion lantern with bayonet socket BaY15d. Optionally for 12 or 24 volts.For vessels under 20 m: stern and anchor light require 10 W, all other lanterns 25 W.Please note: The bulb is part of the approval of navigation light. If an incandescent lamp without approval is used as replacement, the approval of the complete lantern expires. Therefore, it only makes sense to have approved bulbs on board as a reserve.Our marine light bulbs come from Danlamp, Peters & Bey or the RADIUM brand. They have the required approval (type examination by the BSH - Bundesamt für Seeschifffahrt und Hydrographie).

From €12.00 *

LED BaY15d 10-30 v

LED BaY15d 10-30 v

This LED modul is equipped with 30 bright LEDs.It fits in the BaY15d socket of navigation lights. It can replace the classic navigation bulbs.Consumption is only 3 W, 350 lm, 3000K. This LED lamp is not approved for the use in navigation lights!Bulb socket BaY15d.For 10 - 30 volt.

€20.90 *

Bulb BaY15d tube form 28 v

Bulb BaY15d tube form 28 v

Marine bulb with 28 Volt, suitable for the socket BaY15d of navigation lights. This bulb has no approval for navigation lights!

€14.50 *

Similar products

Vollkreislaternen PB 500 aufheißbar

Allround light PB500 hoistable

MED-approval for vessels up to 50 m length, and for all for inland vessels. Body made from polycarbonate plastic, inside parts of stainless steel with 1,2m cable preinstalled.Lantern to hoist with stainless steel holder.The matching marine light bulb BaY15d has to be ordered speratedly (see the category "accessories" down below).BSH approved lights for vessels longer than 50m are available on request.

From €279.30 *

Volkreislaterne PB 500 zur Festmontage

Allround light PB500 fixed mounting

MED-approved for vessels up to 50 m length and all inland vessels.Allround light PB500 with fixed mounting. Watertight black reinforced polycarbonate housing, inside made of stainless steel, watertight IP56. Watertight cable gland, fitted with 1.2m cable.Easy replacement of the bulb from the top side.Comes without bulbs.BSH approved navigation lights for boats over 50 m lenght can be delivered on request.

From €199.50 *

Last seen products

More articles from this category

3230-023 2-Farben Laterne PB 410 Edelstahl

Navigation light PB 410 stainless steel

The PB 410 navigation light series is manufactured by the Hamburg based company PETERS & BEY, with a sturdy housing made of matte stainless steel and lenses made of polycarbonate plastic. Intended for stern mounting on the supplied slip-on hook.MED approval for vessels up to 20m length. Supplied without bulb. Light source socket BaY15d. Accessories such as various mounting plates, interchangeable angles and spare parts such as lenses, sockets are available.

€269.00 *

BSH certificate

3230-100 Ersatz-Elektroeinsatz für PB410

Spare parts for navigation lights PB 410

Lenses and seals are available as replacement parts for our sturdy and durable PETERS & BEY navigation lights, so these lanterns can remain functional for decades. Poycarbonate lenses of navigationlights can become brittle and dull after years of UV exposure, so replacing the lenses may be advisable. The lenses come with four pop rivets, and the seal kit includes two soft rubber seals. The electrical insert with bayonet socket is also replaceable.

From €5.00 *

Copper Navigation Lights PB422Cu

Copper Navigation Lights PB422Cu

The navigation lights of the PB CLASSIC series were developed exclusively for TOPLICHT.The housing is manufactured at the PETERS & BEY lamp factory in Hamburg from matte copper sheet, the traditional material for position lanterns. It can be polished on board or left to weather naturally. The lens is made of impact resistant polycarbonate.Mounting options: The lantern can be permanently mounted with four screws over the black plastic backplate or removably mounted with the optional stainless steel mounting kit (Art.No. 3233-100) .Lamp socket BaY 15 d. Supplied without bulb.MED approval for ships up to 20 m in length.

From €199.00 *

Navigation lights PB420

Navigation lights PB420

High-quality navigation lights from the Hamburg-based manufacturer PETERS & BEY with MED approval for vessels up to 20m in length.The housing is made of black plastic, the lenses are made of impact resistant polycarbonate with stainless steel bezels. The lantern can be permanently mounted on the back wall with four screws or removably mounted with the mounting kit (item no. 3233-100).Socket: BaY15d, delivery without light bulb.Suitable for 12/24 V on-board power supply, 25W (rear lantern 10W).

From €130.00 *

Allround light PB 427 hoistable

Allround light PB 427 hoistable

All-round lanterns from the Hamburg-based lamp manufacturer PETERS & BEY with MED approval for ships up to 20 m in length.The housing is made of black plastic with an impact-resistant polycarbonate lens.Socket: BaY15d. Supplied without light bulb.

From €128.00 *

Allround light PB 426 fixed mounting

Allround light PB 426 fixed mounting

All-round lanterns for fixed mounting, manufactured by PETERS & BEY.MED approval for ships up to 20 m in length.The housing is made of black plastic with a lens of impact-resistant polycarbonate. Base diameter: 87 mm.Practical for winter storage: the lantern head can be easily unscrewed.Socket: BaY15d. Supplied without bulb.

From €120.00 *

Signal lantern PB 431 fixed mounting

Signal lantern PB 431 fixed mounting

360° lantern from PETERS & BEY, for fixed mounting (diameter of mounting plate at bottom = 50 mm) for example in the masthead.The housing is made of matt stainless steel, the lenses are plastic. The signal lanterns (all-round 360°) are available in various colors and can be combined as desired, for example, two red all-round lights make up the trip lights.Spare parts such as lenses, sockets are available.MED approval for ships up to 20 m length.Socket: BaY15d.Supplied without bulbs.

From €214.00 *

Anchor / Signal lantern PB 400 hoistable

Anchor / Signal lantern PB 400 hoistable

Allround lights from the Hamburg lamp manufacturer PETERS & BEY that can be heated up with two fastening eyelets. The housing is made of frosted stainless steel with a lens of impact-resistant polycarbonate.MED approval for ships up to 20 m length.Socket: BaY15d.Supplied without bulbs.

From €233.00 *

Positionslaternen PB 500

Navigation lights PB500

MED approval for vessels up to 50 m in length, unlimited in inland navigation.The waterproof black housing as well as the lenses are made of plastic, the inner parts and orifices are made of stainless steel. Supplied with 1.2m installed cable. Bulb replacement is easily done from the top by flipping open the housing cover.Hole spacing on the mounting plate: 120 x 120mm.Protection class: IP56 Socket: BaY15dSupplied without light source.Supplied without bulb.

From €226.10 *

Vollkreislaternen PB 500 aufheißbar

Allround light PB500 hoistable

MED-approval for vessels up to 50 m length, and for all for inland vessels. Body made from polycarbonate plastic, inside parts of stainless steel with 1,2m cable preinstalled.Lantern to hoist with stainless steel holder.The matching marine light bulb BaY15d has to be ordered speratedly (see the category "accessories" down below).BSH approved lights for vessels longer than 50m are available on request.

From €279.30 *

Volkreislaterne PB 500 zur Festmontage

Allround light PB500 fixed mounting

MED-approved for vessels up to 50 m length and all inland vessels.Allround light PB500 with fixed mounting. Watertight black reinforced polycarbonate housing, inside made of stainless steel, watertight IP56. Watertight cable gland, fitted with 1.2m cable.Easy replacement of the bulb from the top side.Comes without bulbs.BSH approved navigation lights for boats over 50 m lenght can be delivered on request.

From €199.50 *

3346-001 Steuerbord Laterne PB 580 LED

PB 580 LED-Navigation Lights

The LED technology impresses with its low power consumption and extremely long, maintenance-free service life. MED, BSH, GL and UL 1104 approval for ships up to 50m in length (Topp 3346-004 and combination lights up to 20m). Attractive, heavy functional design that makes no compromise in material choice and dimensions. Body of seawater-proof aluminum, with hard coating, colour graphite grey. The glass is a weather-resistant, clear borosilicate glas.An internal operating hours counter lights a control LED after the guaranteed 20.000 hours of use.Power supply: 9-28 V (steaming light Art-Nr. 3346-009: only 24 V).Supplied ready for connection with 1.5 m cable and including a suitable mounting.Dimensions diameter x height: Anchor light 64 x 59 mm, Topp light bis 5 sm 64 x 92 mm, all others 64 x 54 mm.Weight: 350 g.Protection class IP67.Other models are available on request.

From €399.00 *

BSH certificate

LED-navigation lights PB 580

LED-navigation lights PB 580

Compact LED position light with BSH approval for ships up to 20 m in length.The LED technology impresses with its low power consumption and extremely long, maintenance-free service life. Elegant, heavy and vibration-resistant housing made of polished brass. The cylindrical glass is weather-resistant, clear borosilicate glass. An internal operating hours counter causes the lantern to flash after 20,000 hours of guaranteed service life.Suitable for on-board voltages from 9-28 volts.Supplied ready for connection with 1.5 m cable and including corresponding holder.Dimensions diameter x height: 64 x 54 mmWeight: approx. 350 gProtection class IP68

€355.00 *

Mounting Brackets for PB 580 Navigation Lights

Mounting Brackets for PB 580 Navigation Lights

Various mounting brackets for the PB 580 LED position lantern series (item no. 3346-...) from PETERS & BEY.The mounting brackets are made of stainless steel and are suitable for the following installation:for side mounting, pole and top mounting as well as an offset version.A heating set for the rotating beacon is also available.Each PETERS & BEY lantern is supplied with a standard mounting bracket.

From €15.00 *

3236*09 Positionslichter PB 422 Edelstahl

Navigation Light PB 422 Stainless Steel

Classic position lanterns from the Hamburg-based company PETERS & BEY. The 422 series has the same design as the 420 series, except that the cover and base of the housing are made of matt stainless steel. The lens is made of impact-resistant polycarbonate. The cable outlet and four holes for mounting are located on the rear panel, which is made of white plastic. MED approval for vessels up to 20m in length.Bulb holder BaY15d, supplied without bulb.

From €199.00 *

LED navigation lantern PB 780 24V

LED navigation lantern PB 780 24V

The 780 series is the LED lantern for ships over 50 meters in length from the Hamburg-based manufacturer PETERS & BEY.The housing is made of black, glass fiber-reinforced polyamide with stainless steel covers and is corrosion-free, shock-proof and seawater-resistant.Thanks to the LED technology, the navigation light is maintenance-free and has a service life of 50,000 operating hours. It is also suitable for converting older type 760 navigation lights to LED, as the dimensions of the housing are identical. Weight: 950 g. Protection class IP56, suitable for 24 V on-board power supply, also available on request in 115 V or 230 V versions and as a double lantern with internally installed reserve unit.The LED lantern 780 has the following approvals: BSH, GL, UL 1104, MEDHole spacing in the mounting plate: 155.5 x 155.5 mm.

From €541.00 *

Request sent successfully

Request wasn't send - a error occured. Please try again.