Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Synthetic high performance grease with PTFE solid lubricants, good adhesive strength, water-resistant, free of resin and acids.
Questions about the product?

Similar products

Winch grease 75g tube ANDERSEN P/N=500001
Grease for winches ANDERSEN
packaging: 75g tube
Grease for sheet and halyard winches. Special product of the manufacturer ANDERSEN, recommended in particular for ANDERSEN winches.Tube of 75 g.

€27.90 *
Details
TOP2000 500g tube of winch/super-longtime grease
Winch grease
packaging: 500ml-tube
Soft, adhesive special grease with good saltwater and walk resistance, as well as high pressure absorbtion properties.Won't harden.

Content: 0.5 kg (€43.90* / 1 kg)

€21.95 *
Details
TOP2000 500ml spray can Super-Longtime-Grease
Grease spray TOP 2000
packaging: 500 ml spray
Soft, adhesive special grease with good seawater and fulling resistance as well as excellent pressure absorption capacity. Not resinous.

Content: 0.5 Liter (€39.90* / 1 Liter)

€19.95 *
Details
Service kit & spare parts ANDERSEN
Service kit & spare parts ANDERSEN
Winches should be serviced regularly. To do this, remove the drum and remove the old grease. The moving parts such as gear wheels, axles and pawls should be greased again with winch grease. The springs, brackets and clamps or snap rings should be replaced regularly to prevent wear. This gives the winches an almost unlimited service life.Spare parts kits containing the most important wear and spare parts are available for all ANDERSEN winches. To find out which spare parts kit is the right one for your winch, you will find instructions (e.g. for determining the age of the winch) further down on this page under "Downloads & Information".The black plastic covers (disc springs) and suitable winch grease for maintenance can be found under "Matching items" further down on this page.Contents of the kits:Servicekit #1:(for 12ST bis 28ST, 40ST, 40ST FS untill 2006)1 Screw M6x121 Screw M6x104 Spring 5335002 Pallen 7132001 Palle 5334004 Armspring 7133002 Ball, Stainless steel 7249002 Ball POM 7249021 Retaining ring 7266001 Locking pin DIN 1481 3x101 Circlip 7278001 Circlip 590300UServicekit #4:(for 10, 16, 28, 40, 46)1 Circlip 7160011 Circlip 7128004 Pawl 7132008 Armspring 713300Basiskit #6:(for 6, 10, 16, 28, 40, 46, 48)5 Circlip 71280010 Armspring 713300Servicekit #8:(for 52ST)2 Screw M6x161 Screw1 Screw M6x81 Screw 5831008 Spring 5335004 Pawl 5334002 Ball, Stainless steel 5263012 Ball POM 5663021 Retaining ring 5266004 Bushing composite 5256001 Circlip 590600U1 Circlip 591000U1 Circlip 590200Servicekit #10:(for all)10 Spring 53350010 Spring 713300Servicekit #12:(for 58ST, 62ST)4 Screw M8x168 Spring 5335004 Pawl 5334002 Ball, Stainless steel 5263012 Ball POM 5663021 Retaining ring 2545002 Bushing composite 5256012 Bushing composite 5256001 Circlip 590400U1 Circlip 5934002 Bushing 786600Servicekit #14:(for 90, 91, 92)1 Screw M6x101 Seergering 101 Seergering 8x0,81 Spring 5905001 Nylon washer 9612001 Delrin washer 9616001 Pawl 9620001 Upper cover washer 964600Servicekit #15:(for 100, 101, 102)1 Screw M6x101 Screw M8x161 Seergering 101 Seergering 8x0,81 Spring 5905001 Nylon washer 9652001 Bronze washer 9647001 Pawl 9663001 Upper cover washer 964600Servicekit #16:(for 6)1 Screw M8x161 Space-washer1 Pawl1 ArmspringServicekit #17: (for ST46 1997 until july 2006) 8 Spring 713300 4 Pawl 713200 5 Bushing 981400 2 Ball Stainless 724900 2 Ball POM 724902 1 Circlip 523500 1 Circlip 590300U 1 Screw M6x16 ISO7380-A4-M6X16 1 Screw M6x16 583600Servicekit #18:(for 12ST FS, 18ST FS, 28ST FS from 2006)1 Screw M5x121 Screw M6x121 Screw M4x124 Pawl 7132001 Pawl 5334008 Armspring 7133004 Spring 5335001 Bushing 729501Servicekit #19:(for 46ST from 2006)1 Screw M6x124 Bushing 9814004 Pawl 7132008 Armspring 7133001 Circlip 590300U1 Screw M6x12disc ring:for 40ST (until 12/2005): R-RA 535500for 40ST (from V.3.0): R-RA 535510

From €36.50 *
Details

Last seen products

More articles from this category

Bronze winch base SPARTAN
Bronze winch base SPARTAN
Universal winch base.This platform is be mounted on the cockpit coming and offers a stylish, functional and very robust base for a winch.Made of high-tensile seawater resistant cast bronze with tumbled matt finish.The winch-mounting surface is undrilled and can therefore be used with various winch models. The platform is also available in various angles.Screw joints on deck and on the coaming.Built by the American manufacturer SPARTAN.Winches sold separately.

From €175.00 *
Details
Winch handle ANDERSEN
Winch handle ANDERSEN
Stainless-steel winch handle from the renowned Danish winch manufacturer ANDERSEN. Flat stainless steel body with strong black plastic handle. Standard 8-point locking 11/16" socket.

From €106.00 *
Details
Service kit & spare parts ANDERSEN
Service kit & spare parts ANDERSEN
Winches should be serviced regularly. To do this, remove the drum and remove the old grease. The moving parts such as gear wheels, axles and pawls should be greased again with winch grease. The springs, brackets and clamps or snap rings should be replaced regularly to prevent wear. This gives the winches an almost unlimited service life.Spare parts kits containing the most important wear and spare parts are available for all ANDERSEN winches. To find out which spare parts kit is the right one for your winch, you will find instructions (e.g. for determining the age of the winch) further down on this page under "Downloads & Information".The black plastic covers (disc springs) and suitable winch grease for maintenance can be found under "Matching items" further down on this page.Contents of the kits:Servicekit #1:(for 12ST bis 28ST, 40ST, 40ST FS untill 2006)1 Screw M6x121 Screw M6x104 Spring 5335002 Pallen 7132001 Palle 5334004 Armspring 7133002 Ball, Stainless steel 7249002 Ball POM 7249021 Retaining ring 7266001 Locking pin DIN 1481 3x101 Circlip 7278001 Circlip 590300UServicekit #4:(for 10, 16, 28, 40, 46)1 Circlip 7160011 Circlip 7128004 Pawl 7132008 Armspring 713300Basiskit #6:(for 6, 10, 16, 28, 40, 46, 48)5 Circlip 71280010 Armspring 713300Servicekit #8:(for 52ST)2 Screw M6x161 Screw1 Screw M6x81 Screw 5831008 Spring 5335004 Pawl 5334002 Ball, Stainless steel 5263012 Ball POM 5663021 Retaining ring 5266004 Bushing composite 5256001 Circlip 590600U1 Circlip 591000U1 Circlip 590200Servicekit #10:(for all)10 Spring 53350010 Spring 713300Servicekit #12:(for 58ST, 62ST)4 Screw M8x168 Spring 5335004 Pawl 5334002 Ball, Stainless steel 5263012 Ball POM 5663021 Retaining ring 2545002 Bushing composite 5256012 Bushing composite 5256001 Circlip 590400U1 Circlip 5934002 Bushing 786600Servicekit #14:(for 90, 91, 92)1 Screw M6x101 Seergering 101 Seergering 8x0,81 Spring 5905001 Nylon washer 9612001 Delrin washer 9616001 Pawl 9620001 Upper cover washer 964600Servicekit #15:(for 100, 101, 102)1 Screw M6x101 Screw M8x161 Seergering 101 Seergering 8x0,81 Spring 5905001 Nylon washer 9652001 Bronze washer 9647001 Pawl 9663001 Upper cover washer 964600Servicekit #16:(for 6)1 Screw M8x161 Space-washer1 Pawl1 ArmspringServicekit #17: (for ST46 1997 until july 2006) 8 Spring 713300 4 Pawl 713200 5 Bushing 981400 2 Ball Stainless 724900 2 Ball POM 724902 1 Circlip 523500 1 Circlip 590300U 1 Screw M6x16 ISO7380-A4-M6X16 1 Screw M6x16 583600Servicekit #18:(for 12ST FS, 18ST FS, 28ST FS from 2006)1 Screw M5x121 Screw M6x121 Screw M4x124 Pawl 7132001 Pawl 5334008 Armspring 7133004 Spring 5335001 Bushing 729501Servicekit #19:(for 46ST from 2006)1 Screw M6x124 Bushing 9814004 Pawl 7132008 Armspring 7133001 Circlip 590300U1 Screw M6x12disc ring:for 40ST (until 12/2005): R-RA 535500for 40ST (from V.3.0): R-RA 535510

From €36.50 *
Details
Grease for winches ANDERSEN
Grease for winches ANDERSEN
Grease for sheet and halyard winches. Special product of the manufacturer ANDERSEN, recommended in particular for ANDERSEN winches.Tube of 75 g.

€27.90 *
Details
ANDERSEN Plastic disc ring
ANDERSEN Plastic disc ring
Replacement plastic ring (Disc Spring) for Andersen winches.The size of the rings varies depending on the model and year of manufacture.In the table below you will find the right ring for your Andersen winch.

From €36.00 *
Details
WILMEX Bronze winch handle for halyard winch Type 1
WILMEX Bronze winch handle for halyard winch Type 1
Flat bronze winch handle, polished or chromed finish.With spring-loaded lock.Sold without winch!

From €164.00 *
Details
WILMEX Bronze winch handle for sheet winch
WILMEX Bronze winch handle for sheet winch
Flat bronze winch handle, polished or chromed finish.With spring-loaded lock.Sold without winch!

From €299.00 *
Details
Teak winch handle holder
Teak winch handle holder
Cockpit winch-handle pocket, screws-in.Made from strong laminated teak, sanded, unvarnished.

€58.90 *
Details
Winch handle holder BARTON
Winch handle holder BARTON
Smart fitting for holding winch handles with 8-point 11/16" sockets when they're not in use.Screws-in. Made from black plastic.

€8.30 *
Details
Winch handle holder PVC
Winch handle holder PVC
Cockpit winch-handle pocket, screws-in.Made from soft white PVC.

€19.90 *
Details
iWINCH bit for cordless drills
iWINCH bit for cordless drills
With the iWINCH bit on a powerful cordless screwdriver (>60 Nm), anchor, halyard and sheet winches can be operated electrically on board.The 11/16" hexagon fits all common winches, the screwdriver must have a 13 mm drill chuck.The adapter is made in Sweden from hard anodised aluminium.

€49.90 *
Details
Winch handle floatable
Winch handle floatable
Very light, floating plastic winch handle.A practical handle for small loads.Colour: gray with red grip.Molded aluminum 11/16" eight-point locking socket.Weighs only 310 g.

€34.50 *
Details
Teak winch bases
Teak winch bases
With this shaped, straight teak winch pad, sheet winches can be matched exactly to the direction of pull.Undrilled and unfinished. Height 30 mm.

From €29.90 *
Details
Teak winch bases
Teak winch bases
With these angled teak pedestals, sheet winches can be matched to the pulling direction of the sheet. Undrilled and unfinished. Sanded to a 15° angle. Max height 30 mm.

From €37.50 *
Details
Fairlead for MURRAY MINOR winch No.4/5
Fairlead for MURRAY MINOR winch No.4/5
Accessory to MURRAY Winches: Massive hand-polished cast-bronze fairlead. The fairlead can be screwed directly to the mounting plate for the MURRAY winch and allows the line to run cleanly.

€81.00 *
Details
Winch bracket for MURRAY no.4/5
Winch bracket for MURRAY no.4/5
Accessory to Murray Winches:Massive cast bronze bracket, with which a winch can be fastened directly to the outer side of the cockpit coaming.Winch and fairlead sold separately.

From €219.00 *
Details
Winche handle WILMEX bronze
Winche handle WILMEX bronze
WILMEX offers a wide variety of winch cranks: three different types of handles (standard, long handle, twin handle) at four lengths. The crank arms are made from polished sand cast bronze, the handles run on bronze shafts and are made from wood-colored laminate (Tufnol). Visually perfect and functional!Internationally standardised octagon 11/16" with safety clip, fitting all well-established winches.

From €222.00 *
Details
Winch handle WILMEX chromed
Winch handle WILMEX chromed
WILMEX offers a wide variety of winch cranks: two different types of handles (standard and twin handle) at four lengths. The crank arms are made from chromed sand cast bronze, the handles run on bronze shafts and are made from wood-colored laminate (Tufnol). Visually perfect and functional!Internationally standardised octagon 11/16" with safety clip, fitting all well-established winches.

From €259.00 *
Details
Marine winch grease LIQUI MOLY
Marine winch grease LIQUI MOLY
Synthetic high performance grease with PTFE solid lubricants, good adhesive strength, water-resistant, free of resin and acids.

€19.90 *
Details
Winch grease
Winch grease
Soft, adhesive special grease with good saltwater and walk resistance, as well as high pressure absorbtion properties.Won't harden.

€21.95 *
Details