Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Auto Pilot Tiller Fitting

1425*02
1425*02 Unterbauwinkel Pinnenpilot

€79.50*

€79.50*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

L1 (mm)
L2 (mm)
B (mm)
H (mm)
Borehole Pin Ø (mm)
Stk

The strong bracket made of cast bronze with polished surface enables optimal, horizontal mounting of the tiller autopilot when the tiller of the boat is lower or higher than the fixed end of the autopilot tiller drive.

Made in England by DAVEY. Supplied without pin for the inlet socket on the autopilot tiller drive.

A hole for inserting the pin corresponding to the autopilot model is provided, Ø 6.5 mm.


more information
Show article
📖 View article in the TOPLICHT catalogue


The strong bracket made of cast bronze with polished surface enables optimal, horizontal mounting of the tiller autopilot when the tiller of the boat is lower or higher than the fixed end of the autopilot tiller drive.

Made in England by DAVEY. Supplied without pin for the inlet socket on the autopilot tiller drive.

A hole for inserting the pin corresponding to the autopilot model is provided, Ø 6.5 mm.


Questions about the product?

Last seen products

More articles from this category

Plastic spring clip
Plastic spring clip
Made from plastic suitable for boat hooks, spinnaker poles as well as tiller extension.Colour: anthracite.

From €2.90 *
Details
Spring clip, plastic
Spring clip, plastic
Solid spring clip made from black plastic with two screw holes for mounting.

From €3.11 *
Details
Boathook holder / spring clip
Boathook holder / spring clip
Strong tube clamps (white or black) made from plastic, that can be employed as boathook holders, door handle clamps or bracket für the tiller. Up to size 55 x 22 mm the clamps are fixed with one central screw, the larger sizes are fixed with two side screws.Material: UV stabilised plastic SANTOPRENE.Shipping in pairs as a set.Colour: black or white.

From €2.65 *
Details
Bronze rudder gear SPARTAN
Bronze rudder gear SPARTAN
Light, but very robust folding-tiller fitting, made from heavy duty cast bronze, tumbled matt finish.Stainless-steel bolting.The tiller is screwed or bolted between the cheeks and can be folded into a perpendicular position.Available for UNC rudder shafts of imperial diameters, with keyway and threaded clamp.A quality product from SPARTAN, the American manufacturer of traditional equipment.

€399.00 *
Details
Bronze rudder gear SPARTAN heavy
Bronze rudder gear SPARTAN heavy
Heavy and very robust folding-tiller fitting, made from heavy duty cast bronze, tumbled matt finish. Stainless-steel bolting. The tiller is screwed or bolted between the cheeks and can be folded into a perpendicular position. Available for UNC rudder shafts of imperial diameters, with keyway and threaded clamp. A quality product from SPARTAN, the American manufacturer of traditional equipment.

From €399.00 *
Details
Tiller fitting DAVEY
Tiller fitting DAVEY
Rudder head for folding tiller.Beautiful, heavy tiller fitting , made from hand-polished cast bronze.Measurements:length L = 200 mmwidth exterior = 45 mmwidth inner = 34 mmweight 1050 gFor 10 mm diameter bolts, single threaded M10.The matching adaptor for rudder shaft must be made separately.

€225.01 *
Details
Stainless tiller fitting HOLT ALLEN
Stainless tiller fitting HOLT ALLEN
Cleanly worked fitting of stainless steel, with which tiller extensions can be attached on the tiller so they will pivot and turn. At 13 mm wide, the tiller joint is so thin that it can be used on wood, aluminum or carbon fiber tiller extensions. Dimensions:Base plate 50 x 20 mm.

€32.00 *
Details
Rubber joint for tiller extension OPTIMIST
Rubber joint for tiller extension OPTIMIST
OPTIMIST rubber joint for tiller extension, with DYNEEMA-core.

€9.00 *
Details
Rubber joint for tiller extension OPTIPARTS
Rubber joint for tiller extension OPTIPARTS
OPTIMIST rubber joint for tiller extension, with DYNEEMA-core.

€16.01 *
Details
Auto Pilot Tiller Fitting
Auto Pilot Tiller Fitting
The strong bracket made of cast bronze with polished surface enables optimal, horizontal mounting of the tiller autopilot when the tiller of the boat is lower or higher than the fixed end of the autopilot tiller drive. Made in England by DAVEY. Supplied without pin for the inlet socket on the autopilot tiller drive. A hole for inserting the pin corresponding to the autopilot model is provided, Ø 6.5 mm.

€79.50 *
Details
Small Bronze tiller fitting
Small Bronze tiller fitting
A strong fitting from cast bronze for sailing dinghys and smaller yachts, elaborately manufactured. Surface: tumbled with matt finish.

€263.00 *
Details
Bronze tiller extention joint
Bronze tiller extention joint
A strong fitting from cast bronze for small yachts, manufactured with great effort. When the tiller extension is lowered onto the tiller aft wards, it is automatically locked. Surface: tumbled with matt finish.

€317.00 *
Details