To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Doradebox stainless steel for VETUS cowl vents

Art. No.	D1 (mm)	D2 (mm)	D3 (mm)	H (mm)	for cowls	model	Price (unit)	Delivery time	Note list	Buy

Downloads

1490-121.pdf

The dorade boxes made of polished stainless steel (AISI 316) drain off penetrating water via the cowl vents and can be sealed completely watertight using the internal mushroom ventilator. Suitable for a maximum deck thickness of 25 mm. VETUS adapter flanges are available on request for greater thicknesses.

Questions about the product?

Similar products

VETUS Stainless Steel Cowl Vents

VETUS Stainless Steel Cowl Vents

Popular and proven ventilation scoops made of A4 cast stainless steel. Painted red on the inside.Available in three different sizes as model JERRY, TOM or YOGI.A threaded ring, which is screwed to the deck, is used to attach the hood. The wind cap is screwed onto the threaded ring using the screw ring. The screw ring can be tightened or loosened using the supplied hook bracket in order to turn the cowl to any desired position and fix it there.A sealing cap is not included in the scope of delivery.To prevent water from entering the inside of the boat, it is recommended to mount the fan on a dorade box.

From €298.00 *

VETUS stainless steel cowl vent DONALD

VETUS stainless steel cowl vent DONALD

Popular and proven ventilation scoops made of A4 cast stainless steel. Painted red on the inside.Modell DONALD.A threaded ring, which is screwed to the deck, is used to attach the hood. The wind cap is screwed onto the threaded ring using the screw ring. The screw ring can be tightened or loosened using the supplied hook bracket in order to turn the cowl to any desired position and fix it there.A sealing cap is not included in the scope of delivery.To prevent water from entering the inside of the boat, it is recommended to mount the fan on a dorade box.

€299.00 *

Plastic dorade box for VETUS cowl vents

Plastic dorade box for VETUS cowl vents

The dorade boxes made of tough plastic drain off any water ingress via the cowl vents and can be sealed completely watertight using the integrated mushroom vent made of stainless steel (AISI 316). Suitable for corresponding VETUS cowl vent models made of silicone or stainless steel.Note: The boxes do not fit VETUS cowl vent models with a screw-on plastic ring which are named with the suffix "S" (SAMOEN-S/CHINOOK-S/LIBEC-S/TRAMON-S).The dorade boxes are supplied without cowl vents.

From €102.00 *

Teak dorade box kit

Teak dorade box kit

Dorade box kit made from solid teak, for self-mounting. Avaialble cut to fit, sanded, with drilled holes, brass fasteners and bungs.Designed for ventilators with flange diameters up to 150 mm. Base 405 x 175 mm, height 135 mm.Cover 335 x 165 mm. For the inside flat vent of this kit we recommend the size 1 of the mushroom ventilator 1835-001 under "suitable items" down below. The ventilators shown in the photos are only an installation sample. The ventilators are not supplied with the dorade box and must ne ordered separately.

€124.00 *

Last seen products

More articles from this category

Bronze goose neck

Bronze goose neck

Strong, thick walled, very robust gooseneck. May be used as cable fairlead or as ventilation.Made from cast sturdy bronze,tumbled with matte finish.

€299.00 *

Plastic dorade box for VETUS cowl vents

Plastic dorade box for VETUS cowl vents

The dorade boxes made of tough plastic drain off any water ingress via the cowl vents and can be sealed completely watertight using the integrated mushroom vent made of stainless steel (AISI 316). Suitable for corresponding VETUS cowl vent models made of silicone or stainless steel.Note: The boxes do not fit VETUS cowl vent models with a screw-on plastic ring which are named with the suffix "S" (SAMOEN-S/CHINOOK-S/LIBEC-S/TRAMON-S).The dorade boxes are supplied without cowl vents.

From €102.00 *

Brass cowl vent heavy sand cast

Brass cowl vent heavy sand cast

Exceptionally heavy and thick-walled vent, made in a small casting workshop in northern Italy.Traditional nautical piece in a round or oval design with matte-polished finish.The sand-casting process by hand creates a finish that, with the production structure, leaves no visible holes, dents, or cavities.Included is a round deck flange (diameter = D3) onto which the vent can be screwed and which can be mounted with three strong knurled thumb screws.A vent that can outlive many a ship!

From €314.00 *

Shell vent SCIROCCO

Shell vent SCIROCCO

Low-profile simple hood vent, made from stainless steel plate, for mounting on the deck or side of the hull.We recommend mounting it on a black plastic deck flange with sealant and a 75 mm gland.

From €10.90 *

Brass shell vent AMERIKA polished or chromed

Brass shell vent AMERIKA polished or chromed

Low-profile hood vent, made from polished or chromed brass, for mounting on the hull.Available in two sizes.Mounting using three M6 threaded blind holes.

From €49.90 *

Brass shell vent BERGAMO

Brass shell vent BERGAMO

Flat vent made from polished, cast brass.There are two M6 screw bolts and nuts supplied for mounting.Available surfaces are: highly polished brass and chrome.

From €44.90 *

Bronze shell ventilator DAVEY 2467

Bronze shell ventilator DAVEY 2467

This vent, fashioned like a shell and made of polished bronze, screws into the deck.Can be mounted horizontally or vertically on deck or on the superstructure.A cross piece in the opening keeps spray and rainwater from flowing under the hood.

From €91.00 *

Brass shell vent ISERLOHN

Brass shell vent ISERLOHN

Beautiful, heavy clam-shell vent. Traditionally sand-cast brass, with a high-gloss polish. Intended for horizontal or vertical mounting on deck or on superstructure. A straight cross piece in this design keeps all wetness from flowing under the hood.

From €139.00 *

Bronze half cowl vent DAVEY

Bronze half cowl vent DAVEY

Polished bronze half-cowl vent to be screwed onto the sides of superstructure or wheel houses.Height 140 mm, opening 60 mm.

From €119.00 *

Cowl vent bronze DAVEY DL2470

Cowl vent bronze DAVEY DL2470

Elegant, very robust wind scoop from the British manufacturer DAVEY. The vent is made of heavy cast bronze, cleanly hand-polished. Supplied complete with deck fitting, cover and bronze key.

From €798.00 *

VETUS Cowl Vents Silicone

VETUS Cowl Vents Silicone

Popular and proven ventilation scoops made of durable white silicone rubber with red painted on the inside. The deck flanges and the screw rings are made of white hard plastic.The hoods can be rotated and removed by the screw ring.Silicone rubber is a very flexible synthetic material that can withstand temperatures between -100°C and + 200°C. It is resistant to UV light and does not discolor, so the cowl will always look like new.Product history:The LIBEC (Silikon) model replaces the older JERRY2 (PVC) model.The CHINOOk (Silikon) model replaces the older TOM2 (PVC) model.The SAMOEN (Silikon) model replaces the older YOGI2 (PVC) model.

From €69.90 *

VETUS TAMON Cowl Vent Silicone

VETUS TAMON Cowl Vent Silicone

Popular and proven ventilation scoop made of durable white silicone rubber with red painted on the inside. The deck flange and the screw ring are made of white hard plastic.The hood can be rotated and removed by the screw ring.Silicone rubber is a very flexible synthetic material that can withstand temperatures between -100°C and + 200°C. It is resistant to UV light and does not discolor, so the cowl will always look like new.The TRAMON (silicone) model replaces the DONALD2 (PVC) model.Supplied without closure cap.

€65.00 *

VETUS Stainless Steel Cowl Vents

VETUS Stainless Steel Cowl Vents

Popular and proven ventilation scoops made of A4 cast stainless steel. Painted red on the inside.Available in three different sizes as model JERRY, TOM or YOGI.A threaded ring, which is screwed to the deck, is used to attach the hood. The wind cap is screwed onto the threaded ring using the screw ring. The screw ring can be tightened or loosened using the supplied hook bracket in order to turn the cowl to any desired position and fix it there.A sealing cap is not included in the scope of delivery.To prevent water from entering the inside of the boat, it is recommended to mount the fan on a dorade box.

From €298.00 *

Cowl vent stainless steel, bronze finish

Cowl vent stainless steel, bronze finish

Wind scoop (deck vent) made of stainless steel A4 precision casting.Supplied with cover flange and screw cap, watertight thanks to O-ring seal. The wind scoop is extremely stable and particularly corrosion-resistant. The inside is powder-coated white. Round shape made of stainless steel, bronze-coloured (Bz) coated using the TITANTUFF process. No polishing required!

€355.00 *

Stainless steel cowl vent

Stainless steel cowl vent

Vent made of A4 stainless steel precision cast with polished surface. The vent is powder-coated white on the inside. The one-piece cast cowl is extremely stable and particularly corrosion-resistant. Supplied complete with deck flange and cover with screw thread and O-ring seal.

€355.00 *

Cowl vent stainless steel long oval

Cowl vent stainless steel long oval

Long-oval "big-mouth" cowl vent made from sheet stainless steel. Polished on the outside, painted white on the inside.Comes complete with stainless steel deck fitting (D = 160 mm) and screw-on cover.Deck fittings are also available separately.

From €499.00 *

Innox cowl vent

Innox cowl vent

This elegant vent is made from A4 stainless steel precision casting, polished on the outside, painted white inside.A threaded flange is screwed to the deck. The vent is able to rotate and is detachable.

€209.00 *

Cowl Vent Stainless Steel

Cowl Vent Stainless Steel

Cowl vent made from precision stainless steel A4 with a long oval opening. Shipping with deck flangeand screwable deck plate, water-proof with O ring gasket.The very sturdy cowl vent has a high gloss finish and is lacquered in white in the inside.

€499.00 *

Cowl Vent brass

Cowl Vent brass

Cowl vent with a round opening. Made from polished cast brass, with polished or chromed surface.The cowl vent is placed on the deck flange and secured with a screw knurl. The deck flange has a diameter of 112 mm.

From €109.95 *

Cover for cowl vent flange

Cover for cowl vent flange

Cap zu close the flange ob the cowl vent 1835-...Available with polished or chromed surface.

From €27.00 *

Request sent successfully

Request wasn't send - a error occured. Please try again.