Surface-mounted spherical compass for bracket mounting on a sailing yacht or motor yacht. Also suitable as a lifeboat compass (MED/SOLAS approval Class B Lifeboats / Rescueboats).Internal gimbal with advance steering line and easy-to-read 5° rose with 70 mm diameter.Scope of deliveryARTICA BA2Integrated 12-volt lightingCompensation deviceMED certificate
100BC is a front reading compass with a solid bracket that enables various mounting alternatives, including on the headlining. It has a main steering scale on the horizontal part of the compass rose and direct reading on the vertical edge. This makes the compass ideal for boats with a sitting as well as a standing helmsman. The integrated illumination makes night navigation easier. The built-in compensator allows you to adjust the compass if it is disturbed by a magnetic deviation. Apperant card diameter 100 mm.
The SILVA 100NBC compass with its solid bracket permits various mounting alternatives. The 100NBC has yellow 45° gimbal-mounted steerage markers, 5° twin dials and damped compass rose (apparent card diameter 100 mm).With Illumination,built-in compensation and visor.
The yacht compass MERKUR S-R can be mounted on the bulkhead or on the console with the bracket mount (please order separately).120 mm apparent rose diameter, weight 1.6 kg oscillation period >4,7 sec.The full sphere, solid construction with gimbaled inner hanger ensure smooth and precise reading under all conditions. Seawater resistant aluminium housing, anodised and black powder-coated, impact and scratch resistant mineral glass dome, clear 5° compass card with three lubber lines.Comes with 12 V lighting (24 V is optional).Top quality, 'Made in Hamburg': For more than 150 years, C. PLATH's quality compasses have been appreciated worldwide.
Compass house made of polished sheet brass, in a traditional design with kerosene lighting on the side. The housing is painted white on the inside and coated with a clear protective lacquer on the outside.Also very decorative, but really suitable for on-board use. With suspension option for a flat glass compass, e.g. the lifeboat compass CASSENS & PLATH TYPE/51 (Article-No. 3740-002) - see "Similar products".The compass house is available in two versions: one-piece with a fixed cover or two-piece with a removable or rotating cover.With the two-part compass house, the hanging options are around 18 cm apart.With the one-piece compass housing, the pins on the gimbal ring must be around 20 cm apart in order to pass through the holes at the front and rear of the housing. If you want to mount the TYPE/51 compass from Cassens & Plath in the one-piece compass housing, you will need longer screws for fastening the gimbal ring. Please indicate in the last step of your order under "Remarks" that you would like us to include these (Article-No. 3740-111) free of charge.The COLZA kerosene burner or the complete kerosene lighting (COLZA burner plus tank) are available as spare parts.The optional compensation magazines (not included in the scope of delivery) are mounted in front of and to the side of the compass and are adjustable in each case. You can find them under "Accessories".
Plastic, matt black varnished case. Suited for every type of compass. Two magazines B and C to compensate with 2 magnets, that can be reversed calibrated. Usually the adjustment has to be performed by a professional. Shipment: 2 magazines 130 x 25 x 25 mm, detailed mounting instruction.
Full gimbal steering and bearing compass which is also well suited for larger steel yachts, as a compensation device (B+C, as well as K) is integrated on the base plate.Compensation, illumination, cover and bearing pin are included.SIGMA is available in black or white, the paint is seawater resistant.A typical installation location is the sliding hatch or the cabin deck, so that the reading can be taken from the helm station.Clear, easy to read scale with 5° graduation. When the cover is removed, the reading can be made from above on the horizontal rose. In backlit conditions, the cover is replaced and the compass can be read from the vertical rose.The SIGMA compass can be easily removed from its mounting within seconds and can then be safely stowed below deck. For this purpose an optional second base plate can be ordered which is fixed below deck. A second base plate can also be fitted to a second cruising stand so that the compass can be moved if required.The supplied shadow or bearing pin is used for astronomical deviation control.Each compass is individually tested and certified.Special Features:Integrated B+C, K compensationReadable from vertical rose when viewed upside down, from horizontal rose when viewed from aboveProfessional designFull cardanic bearingBlack rose with white 5° graduationTemperature stable -30°C to 60°C2 control lines for course control from different directionsLighting 12 or 24 VDCSeawater resistant painted brass housing with hoodA bearing attachment is available as an accessory to perform terrestrial as well as astronomical bearings.
Accessory for the SIGMA compass from CASSENS & PLATH: - additional base plate (without gimbals), to allow mounting in various places onboard, - 12V or 24V lighting.
Compass model BETA/2 in brass housing with surface mount from the traditional manufacturer CASSENS & PLATH.high accuracy (pursuant to the ISO norms)the clear compass rose with 5° divisions allows the compass to be watched over long times without the viewerbecoming tired, even at nightshock and vibration proofshadow indicator for controlling deviation (azimuth bearing), as well as an antiglare 12 volt red lightfactory certificate includedavaiable in black or white
CASSENS & PLATH steering compass model DELTA/2 in brass housing with surface mount.high display accuracy (conforms to ISO norms)the clear rose (diameter 130 mm) with 5° divisions allows effortless reading over long times and at nightshock- and vibration-proofwith shadow pin for deviation control (azimuth bearing) as well as a 12V night-safe red lightfactory certificationavailable polished or painted black
Well-known and proven globe compass from SILVA of Sweden with many advantages:Clear, easy to read 5° compass rose, sapphire bearing, damped and individually balanced with ring magnet and spring suspension. The sphere is made of scratch-resistant acrylic glass, the case of black plastic.he gimbal system allows heeling up to 30°.Yellow steering marks and 12 volt lighting ensure good readability.Rose diameter 70 mm.Two different mounting options are included, allowing the compass to be mounted either as a surface mount compass in a bracket with multiple angle settings, or as a flush mount compass in the bulkhead.The compass is suitable for all speed ranges, for sailing and motor yachts. It is shockproof and has unlimited forward and backward tilt.The compass SILVA 70NBC is supplied with visor, holding lines and with magnet set (compensator).
The SILVA 85 is a rugged compass for sailing dinghy.The heading can be adjusted on the rotating and labelled outer dial.One black dial (with white numbers) and one white dia (with black numbers) is supplied.The compass is fitted without large holes flush on the deck, frequently on both sides of the boat.
125T is a pedestal compass with an apparent scale size of 125 mm, gimballed yellow lubber lines, in-built red lighting and visor. The standard 175 mm base plate fits most steering pedestals. Comes with a built-in compensator.
Steering compass in slightly oval design for built-in mounting.The installation as superstructure is also possible with the optionally available pedestal (height 75 mm).The black housing is equipped with a three-part visor, adjustable compensation magnets and an economical LED light for 12-24 Volts.Apparent rose diameter 115 mm. Deliverable in two versions: - article 3642-115 with a flat card, - article 3642-116 with a conical card. SOLAS, MED and steering wheel certified and as such approved for boats with requirements for commercial service. The mounting base (pedestal) is an accessory and must be ordered separately.
In brass housing. Steering compass series with high display accuracy (conforms to ISO norms). The clear rose (diameter 120 mm) with 5° divisions allows effortless reading over long times and at night. Shock- and vibration-proof. With shadow pin for deviation control (azimuth bearing) as well as a 12V night-safe red light. Certified. Available polished or painted black. Built-up version ZETA/2.
MED/SOLAS approval (see under "Downloads & Information" further down on this page).Professional compass CASSENS & PLATH TYPE/11. The heavy flat glass compass with cardanic suspension is available in two versions.The TYPE/11 bearing/reflection compass is fitted with a brass graduated ring. The brass centre piece, onto which the bearing sight (available as an extra) is attached, is also located on the upper cover glass. This makes it possible to take bearings.The bearing/reflection compass is suitable for use in reflection compass systems and a bearing stand.The TYPE/11 steering compass corresponds to the bearing/reflection compass, but without the bearing ring and centre piece. The outer ring is black here.The steering compass is used as a ceiling or table steering compass or is used in reflection attachments.Technical data:Card diameter 180 mm (7½")Card print north under north (north under south possible as a chargeable extra)1° graduation3-digit numbers every 10°8 cardinal/intercardinal points marked separately1 steering aperture ahead and 1 aft1° graduation on the graduated ring of the bearing compassLongitudinal ship suspension, with bronze bearing bushesVibration-resistant expansion diaphragmUnder "Accessories" you will find the following extras further down on this page:A pair of compass arms for use as a table compass (Article-No. 3730-102)Azimuth device (Article-No. 3730-105)Steering magnifier (Article-No. 3730-108)Lighting element 12 or 24 volt (Article-No. 3730-112 and -124)Surface-mounted dimmer for 24 volt lighting (Article-No. 3730-106)B+C corrector (Article-No. 3730-101)D corrector (Article-No. 3730-107)Wooden storage box (Article-No. 3730-109)
MED/SOLAS approval (see under "Downloads & Information" further down on this page).Professional compass CASSENS & PLATH TYPE/11. The heavy flat glass compass with cardanic suspension is available in two versions.The TYPE/21 bearing/reflection compass is fitted with a brass graduated ring. The brass centre piece, onto which the bearing sight (available as an extra) is attached, is also located on the upper cover glass. This makes it possible to take bearings.The bearing/reflection compass is suitable for use in reflection compass systems and a bearing stand.The TYPE/21 steering compass corresponds to the bearing/reflection compass, but without the bearing ring and centre piece. The outer ring is black here.The steering compass is used as a ceiling or table steering compass or is used in reflection attachments.The TYPE/21 steering compass in the desk binnacle with hood is gimballed in the desk binnacle/160 (suspended in the fore-and-aft direction). The desk binnacle is approved for coastal navigation. The brass hood with insight placed on this GRP lower ring.The 24V lighting element, which is also included in the scope of delivery, illuminates the rose chart from above.To allow the compass to be tilted freely, the deck must be provided with a corresponding cut-out.Technical data:Card diameter 160 mm (6½")Card print north under north (north under south possible as a chargeable extra)1° graduation3-digit numbers every 10°8 cardinal/intercardinal points marked separately1 steering aperture ahead and 1 aft1° graduation on the graduated ring of the bearing compassLongitudinal ship suspension, with bronze bearing bushesVibration-resistant expansion diaphragmUnder "Accessories" you will find the following extras further down on this page:A pair of compass arms for use as a table compass (Article-No. 3730-102)Azimuth device (Article-No. 3730-105)Steering magnifier (Article-No. 3730-108)Lighting element 12 or 24 volt (Article-No. 3730-112 and -124)Surface-mounted dimmer for 24 volt lighting (Article-No. 3730-106)B+C corrector (Article-No. 3730-101)D corrector (Article-No. 3730-107)Wooden storage box (Article-No. 3730-109)
Available accessories: compass arm for table setup, 24 volt lighting dimmer, B+C compensation (made from three plywood magazines 300 x 215 x 30mm, each with 4 magnets), bearing equipment in a plastic case.
The RITCHIE ANGLER RA-91 is a bracket-mounted compass for motorboats and fishing boats.Features:Bracket with knurled screws for quick adjustment or removalApparent rose diameter 70 mm, rose colour blueRose can be read from the front with large digits, 5° graduationBuilt-in compensatorsMoving sun visorGreen 12 volt lightingCompass height 102 mm, with bracket 119 mm. Diameter of the compass housing 90 mm. Weight 400 g. Colour anthracite.
The Ritchie Globemaster is a very popular sailing boat binnacle compass worldwide.For the classic yacht it is available with a traditional skylight hood made from polished brass. Specifications for the Ritchie Globemaster SK-615-EX: - 6" 2 degree flat card dial, - polished brass finish, - full internal gimbals, - built-in compensators, - frosted sunshade panel - hood rotates to allow positioning of the sunshade, - green 12 Volt NiteVu Power Lighting, - 5-year manufacturers warranty, Measurements: 308 x 205 x 252 mm, weight: 9 kg.
