Go to homepage
€0.00*
Jobs
Catalogue
Quick order

CASSENS & PLATH TYPE/21 Steering compass / bearing compass

3730-022 CASSENS & PLATH TYPE/21 Steuerkompass
3730*01 CASSENS & PLATH TYPE/11 Peilkompass / Steuerkompass Maße
3730-011 CASSENS & PLATH TYPE/11 Peilkompass
3730-024 CASSENS & PLATH TYPE/21 Steuerkompass im Haus Maße
3730-024 CASSENS & PLATH TYPE/21 Steuerkompass im Haus
3730-024 CASSENS & PLATH TYPE/21 Steuerkompass im Haus

from €1,599.00*

€1,599.00*

Prices incl. VAT plus shipping costs

Available in 10 days, delivery time 1 Tag

In stock

description
rose (mm)
D (mm)
D1 (mm)
D2 (mm)
H (mm)
Stk

MED/SOLAS approval (see under "Downloads & Information" further down on this page).

Professional compass CASSENS & PLATH TYPE/11. The heavy flat glass compass with cardanic suspension is available in two versions.

The TYPE/21 bearing/reflection compass is fitted with a brass graduated ring. The brass centre piece, onto which the bearing sight (available as an extra) is attached, is also located on the upper cover glass. This makes it possible to take bearings.

The bearing/reflection compass is suitable for use in reflection compass systems and a bearing stand.

The TYPE/21 steering compass corresponds to the bearing/reflection compass, but without the bearing ring and centre piece. The outer ring is black here.

The steering compass is used as a ceiling or table steering compass or is used in reflection attachments.

The TYPE/21 steering compass in the desk binnacle with hood is gimballed in the desk binnacle/160 (suspended in the fore-and-aft direction). The desk binnacle is approved for coastal navigation. The brass hood with insight placed on this GRP lower ring.

The 24V lighting element, which is also included in the scope of delivery, illuminates the rose chart from above.

To allow the compass to be tilted freely, the deck must be provided with a corresponding cut-out.

Technical data:

  • Card diameter 160 mm (6½")
  • Card print north under north (north under south possible as a chargeable extra)
  • 1° graduation
  • 3-digit numbers every 10°
  • 8 cardinal/intercardinal points marked separately
  • 1 steering aperture ahead and 1 aft
  • 1° graduation on the graduated ring of the bearing compass
  • Longitudinal ship suspension, with bronze bearing bushes
  • Vibration-resistant expansion diaphragm

Under "Accessories" you will find the following extras further down on this page:

  • A pair of compass arms for use as a table compass (Article-No. 3730-102)
  • Azimuth device (Article-No. 3730-105)
  • Steering magnifier (Article-No. 3730-108)
  • Lighting element 12 or 24 volt (Article-No. 3730-112 and -124)
  • Surface-mounted dimmer for 24 volt lighting (Article-No. 3730-106)
  • B+C corrector (Article-No. 3730-101)
  • D corrector (Article-No. 3730-107)
  • Wooden storage box (Article-No. 3730-109)


more information
Show 3 articles
📖 View article in the TOPLICHT catalogue


MED/SOLAS approval (see under "Downloads & Information" further down on this page).

Professional compass CASSENS & PLATH TYPE/11. The heavy flat glass compass with cardanic suspension is available in two versions.

The TYPE/21 bearing/reflection compass is fitted with a brass graduated ring. The brass centre piece, onto which the bearing sight (available as an extra) is attached, is also located on the upper cover glass. This makes it possible to take bearings.

The bearing/reflection compass is suitable for use in reflection compass systems and a bearing stand.

The TYPE/21 steering compass corresponds to the bearing/reflection compass, but without the bearing ring and centre piece. The outer ring is black here.

The steering compass is used as a ceiling or table steering compass or is used in reflection attachments.

The TYPE/21 steering compass in the desk binnacle with hood is gimballed in the desk binnacle/160 (suspended in the fore-and-aft direction). The desk binnacle is approved for coastal navigation. The brass hood with insight placed on this GRP lower ring.

The 24V lighting element, which is also included in the scope of delivery, illuminates the rose chart from above.

To allow the compass to be tilted freely, the deck must be provided with a corresponding cut-out.

Technical data:

  • Card diameter 160 mm (6½")
  • Card print north under north (north under south possible as a chargeable extra)
  • 1° graduation
  • 3-digit numbers every 10°
  • 8 cardinal/intercardinal points marked separately
  • 1 steering aperture ahead and 1 aft
  • 1° graduation on the graduated ring of the bearing compass
  • Longitudinal ship suspension, with bronze bearing bushes
  • Vibration-resistant expansion diaphragm

Under "Accessories" you will find the following extras further down on this page:

  • A pair of compass arms for use as a table compass (Article-No. 3730-102)
  • Azimuth device (Article-No. 3730-105)
  • Steering magnifier (Article-No. 3730-108)
  • Lighting element 12 or 24 volt (Article-No. 3730-112 and -124)
  • Surface-mounted dimmer for 24 volt lighting (Article-No. 3730-106)
  • B+C corrector (Article-No. 3730-101)
  • D corrector (Article-No. 3730-107)
  • Wooden storage box (Article-No. 3730-109)


Questions about the product?

Accessories

CASSENS & PLATH TYPE/11 and TYPE/21 accessories
CASSENS & PLATH TYPE/11 and TYPE/21 accessories
Available accessories: compass arm for table setup, 24 volt lighting dimmer, B+C compensation (made from three plywood magazines 300 x 215 x 30mm, each with 4 magnets), bearing equipment in a plastic case.

From €135.00 *
Details
CASSENS & PLATH Illumination element
CASSENS & PLATH Illumination element
Illumination unit for steering compass type 21 and 11, compasses BETA, IOTA, DELTA and ZETA from CASSENS & PLATH.

From €63.50 *
Details

Last seen products

More articles from this category

CASSENS & PLATH SIGMA Steering compass / Bearing compass
CASSENS & PLATH SIGMA Steering compass / Bearing compass
Full gimbal steering and bearing compass which is also well suited for larger steel yachts, as a compensation device (B+C, as well as K) is integrated on the base plate.Compensation, illumination, cover and bearing pin are included.SIGMA is available in black or white, the paint is seawater resistant.A typical installation location is the sliding hatch or the cabin deck, so that the reading can be taken from the helm station.Clear, easy to read scale with 5° graduation. When the cover is removed, the reading can be made from above on the horizontal rose. In backlit conditions, the cover is replaced and the compass can be read from the vertical rose.The SIGMA compass can be easily removed from its mounting within seconds and can then be safely stowed below deck. For this purpose an optional second base plate can be ordered which is fixed below deck. A second base plate can also be fitted to a second cruising stand so that the compass can be moved if required.The supplied shadow or bearing pin is used for astronomical deviation control.Each compass is individually tested and certified.Special Features:Integrated B+C, K compensationReadable from vertical rose when viewed upside down, from horizontal rose when viewed from aboveProfessional designFull cardanic bearingBlack rose with white 5° graduationTemperature stable -30°C to 60°C2 control lines for course control from different directionsLighting 12 or 24 VDCSeawater resistant painted brass housing with hoodA bearing attachment is available as an accessory to perform terrestrial as well as astronomical bearings.

From €1,265.00 *
Details
CASSENS & PLATH SIGMA Accessories
CASSENS & PLATH SIGMA Accessories
Accessory for the SIGMA compass from CASSENS & PLATH: - additional base plate (without gimbals), to allow mounting in various places onboard, - 12V or 24V lighting.

From €63.50 *
Details
CASSENS & PLATH BETA Cover
CASSENS & PLATH BETA Cover
Anti-dazzle hood with aperture for CASSENS & PLATH compasses BETA/1 and BETA/2.Avaiable in black or white.

€145.00 *
Details
CASSENS & PLATH Illumination element
CASSENS & PLATH Illumination element
Illumination unit for steering compass type 21 and 11, compasses BETA, IOTA, DELTA and ZETA from CASSENS & PLATH.

From €63.50 *
Details
CASSENS & PLATH DELTA/2 Surface mount globe compass
CASSENS & PLATH DELTA/2 Surface mount globe compass
CASSENS & PLATH steering compass model DELTA/2 in brass housing with surface mount.high display accuracy (conforms to ISO norms)the clear rose (diameter 130 mm) with 5° divisions allows effortless reading over long times and at nightshock- and vibration-proofwith shadow pin for deviation control (azimuth bearing) as well as a 12V night-safe red lightfactory certificationavailable polished or painted black

From €1,039.00 *
Details
CASSENS & PLATH DELTA/1 Flush mount globe compass
CASSENS & PLATH DELTA/1 Flush mount globe compass
Installable compass in a brass housing (polished or black). Steering compass from the traditional manufacturer CASSENS & PLATH, with higher accuracy (pursuant to the ISO norms). The clear compass rose with 5° divisions allows the compass to be watched over long times without the watcher becoming tired, even at night. Shock and vibration proof. With a shadow indicator for controlling deviation (azimuth bearing), as well as an antiglare 12 volt red light. With certificate. Brass housing. Available painted black or polished. Fixed version DELTA for installation at the helm or in the deck.

From €1,039.00 *
Details
CASSENS & PLATH Anti-dazzle hood for DELTA compass
CASSENS & PLATH Anti-dazzle hood for DELTA compass
Anti-dazzle hood with aperture, for compass DELTA from CASSENS & PLATH.Available in brass or in black.

From €118.00 *
Details
SILVA 100NBC/FBC Compass
SILVA 100NBC/FBC Compass
The SILVA 100NBC compass with its solid bracket permits various mounting alternatives. The 100NBC has yellow 45° gimbal-mounted steerage markers, 5° twin dials and damped compass rose (apparent card diameter 100 mm).With Illumination,built-in compensation and visor.

€204.00 *
Details
SILVA 125T steering column compass
SILVA 125T steering column compass
125T is a pedestal compass with an apparent scale size of 125 mm, gimballed yellow lubber lines, in-built red lighting and visor. The standard 175 mm base plate fits most steering pedestals. Comes with a built-in compensator.

€329.00 *
Details
SILVA 85 dinghy superstructure compass
SILVA 85 dinghy superstructure compass
The SILVA 85 is a rugged compass for sailing dinghy.The heading can be adjusted on the rotating and labelled outer dial.One black dial (with white numbers) and one white dia (with black numbers) is supplied.The compass is fitted without large holes flush on the deck, frequently on both sides of the boat.

€89.00 *
Details
SILVA 70NBC/FBC Compass
SILVA 70NBC/FBC Compass
Well-known and proven globe compass from SILVA of Sweden with many advantages:Clear, easy to read 5° compass rose, sapphire bearing, damped and individually balanced with ring magnet and spring suspension. The sphere is made of scratch-resistant acrylic glass, the case of black plastic.he gimbal system allows heeling up to 30°.Yellow steering marks and 12 volt lighting ensure good readability.Rose diameter 70 mm.Two different mounting options are included, allowing the compass to be mounted either as a surface mount compass in a bracket with multiple angle settings, or as a flush mount compass in the bulkhead.The compass is suitable for all speed ranges, for sailing and motor yachts. It is shockproof and has unlimited forward and backward tilt.The compass SILVA 70NBC is supplied with visor, holding lines and with magnet set (compensator).

€159.00 *
Details
Boat compass PLASTIMO OFFSHORE 115
Boat compass PLASTIMO OFFSHORE 115
Steering compass in slightly oval design for built-in mounting.The installation as superstructure is also possible with the optionally available pedestal (height 75 mm).The black housing is equipped with a three-part visor, adjustable compensation magnets and an economical LED light for 12-24 Volts.Apparent rose diameter 115 mm. Deliverable in two versions: - article 3642-115 with a flat card, - article 3642-116 with a conical card. SOLAS, MED and steering wheel certified and as such approved for boats with requirements for commercial service. The mounting base (pedestal) is an accessory and must be ordered separately.

From €256.90 *
Details
CASSENS & PLATH ZETA/2 Surface mount globe compass
CASSENS & PLATH ZETA/2 Surface mount globe compass
In brass housing. Steering compass series with high display accuracy (conforms to ISO norms). The clear rose (diameter 120 mm) with 5° divisions allows effortless reading over long times and at night. Shock- and vibration-proof. With shadow pin for deviation control (azimuth bearing) as well as a 12V night-safe red light. Certified. Available polished or painted black. Built-up version ZETA/2.

From €574.00 *
Details
CASSENS & PLATH ZETA/1 Flush mount globe compass
CASSENS & PLATH ZETA/1 Flush mount globe compass
CASSENS & PLATH ZETA/1 built-in spherical compass with solid brass housing. Available in polished brass or black lacquered.Steering compass with high display accuracy (according to ISO standard).The clear rose pattern with 5° graduation enables fatigue-free reading over long periods of time, even at night.Technical features:Shock and vibration resistantBuilt-in shadow pin for deviation control (azimuth bearing)Glare-free 12 volt red light illuminationwith factory certificate

From €574.00 *
Details
CASSENS & PLATH Anti dazzle hood for ZETA compass
CASSENS & PLATH Anti dazzle hood for ZETA compass
Anti-dazzle hood with aperture, for compass ZETA from CASSENS & PLATH.Available in brass or in black.

From €102.00 *
Details
Compass MERKUR S-R C.PLATH
Compass MERKUR S-R C.PLATH
The yacht compass MERKUR S-R can be mounted on the bulkhead or on the console with the bracket mount (please order separately).120 mm apparent rose diameter, weight 1.6 kg oscillation period >4,7 sec.The full sphere, solid construction with gimbaled inner hanger ensure smooth and precise reading under all conditions. Seawater resistant aluminium housing, anodised and black powder-coated, impact and scratch resistant mineral glass dome, clear 5° compass card with three lubber lines.Comes with 12 V lighting (24 V is optional).Top quality, 'Made in Hamburg': For more than 150 years, C. PLATH's quality compasses have been appreciated worldwide.

€91.50 *
Details
CASSENS & PLATH TYPE/11 Steering compass / Bearing compass
CASSENS & PLATH TYPE/11 Steering compass / Bearing compass
MED/SOLAS approval (see under "Downloads & Information" further down on this page).Professional compass CASSENS & PLATH TYPE/11. The heavy flat glass compass with cardanic suspension is available in two versions.The TYPE/11 bearing/reflection compass is fitted with a brass graduated ring. The brass centre piece, onto which the bearing sight (available as an extra) is attached, is also located on the upper cover glass. This makes it possible to take bearings.The bearing/reflection compass is suitable for use in reflection compass systems and a bearing stand.The TYPE/11 steering compass corresponds to the bearing/reflection compass, but without the bearing ring and centre piece. The outer ring is black here.The steering compass is used as a ceiling or table steering compass or is used in reflection attachments.Technical data:Card diameter 180 mm (7½")Card print north under north (north under south possible as a chargeable extra)1° graduation3-digit numbers every 10°8 cardinal/intercardinal points marked separately1 steering aperture ahead and 1 aft1° graduation on the graduated ring of the bearing compassLongitudinal ship suspension, with bronze bearing bushesVibration-resistant expansion diaphragmUnder "Accessories" you will find the following extras further down on this page:A pair of compass arms for use as a table compass (Article-No. 3730-102)Azimuth device (Article-No. 3730-105)Steering magnifier (Article-No. 3730-108)Lighting element 12 or 24 volt (Article-No. 3730-112 and -124)Surface-mounted dimmer for 24 volt lighting (Article-No. 3730-106)B+C corrector (Article-No. 3730-101)D corrector (Article-No. 3730-107)Wooden storage box (Article-No. 3730-109)

From €1,599.00 *
Details
CASSENS & PLATH TYPE/11 and TYPE/21 accessories
CASSENS & PLATH TYPE/11 and TYPE/21 accessories
Available accessories: compass arm for table setup, 24 volt lighting dimmer, B+C compensation (made from three plywood magazines 300 x 215 x 30mm, each with 4 magnets), bearing equipment in a plastic case.

From €135.00 *
Details
CASSENS & PLATH TYPE/21 Steering compass / bearing compass
CASSENS & PLATH TYPE/21 Steering compass / bearing compass
MED/SOLAS approval (see under "Downloads & Information" further down on this page).Professional compass CASSENS & PLATH TYPE/11. The heavy flat glass compass with cardanic suspension is available in two versions.The TYPE/21 bearing/reflection compass is fitted with a brass graduated ring. The brass centre piece, onto which the bearing sight (available as an extra) is attached, is also located on the upper cover glass. This makes it possible to take bearings.The bearing/reflection compass is suitable for use in reflection compass systems and a bearing stand.The TYPE/21 steering compass corresponds to the bearing/reflection compass, but without the bearing ring and centre piece. The outer ring is black here.The steering compass is used as a ceiling or table steering compass or is used in reflection attachments.The TYPE/21 steering compass in the desk binnacle with hood is gimballed in the desk binnacle/160 (suspended in the fore-and-aft direction). The desk binnacle is approved for coastal navigation. The brass hood with insight placed on this GRP lower ring.The 24V lighting element, which is also included in the scope of delivery, illuminates the rose chart from above.To allow the compass to be tilted freely, the deck must be provided with a corresponding cut-out.Technical data:Card diameter 160 mm (6½")Card print north under north (north under south possible as a chargeable extra)1° graduation3-digit numbers every 10°8 cardinal/intercardinal points marked separately1 steering aperture ahead and 1 aft1° graduation on the graduated ring of the bearing compassLongitudinal ship suspension, with bronze bearing bushesVibration-resistant expansion diaphragmUnder "Accessories" you will find the following extras further down on this page:A pair of compass arms for use as a table compass (Article-No. 3730-102)Azimuth device (Article-No. 3730-105)Steering magnifier (Article-No. 3730-108)Lighting element 12 or 24 volt (Article-No. 3730-112 and -124)Surface-mounted dimmer for 24 volt lighting (Article-No. 3730-106)B+C corrector (Article-No. 3730-101)D corrector (Article-No. 3730-107)Wooden storage box (Article-No. 3730-109)

From €1,599.00 *
Details
CASSENS & PLATH TYPE/51 Lifeboat compass varnished
CASSENS & PLATH TYPE/51 Lifeboat compass varnished
CASSENS & PLATH TYPE/51 - the flat glass compass with full cardanic suspension is a traditional lifeboat compass. It complies with ISO 25862.Made of brass, the housing is stove-enamelled grey, the ring and gimbal are black.The compass has a traditional compass card with a diameter of 100 mm and 5° graduation.A wooden storage box with sliding lid (Article-No. 3740-010) and a brass compass house with petroleum lighting (one-piece, Article-No. 3740-011 or two-piece -012) can be found further down on this page under "Accessories".

€539.00 *
Details