Go to homepage
€0.00*
Jobs
Catalogue
Quick order

VENEZIANI EUROSPRINT ECO Biocide Free UW-Paint

from €47.90*

Content: 2.5 (€19.16* / 1 Liter)

€47.90*

Content: 2.5 Liter (€19.16* / 1 Liter)

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

colour
contents
Ds

VENEZIANI EUROSPRINT ECO is a biocide-free, solvent-based paint for underwater hulls. Thanks to the hard matrix, it is also suitable for high sailing speeds. The paint can be applied to all substrates and is suitable for mixed and fresh waters.

Technical data

  • Area of application: Waters with medium fouling
  • Boat type: Motor and sailing boats of all speeds
  • Substrate (with appropriate primer): all materials, including aluminum
  • Coverage: approx. 12.5 m²/l
  • Dilution: VENEZIANI Thinner 6470
  • Application method: Brush, roller, spraying (professional use only)
  • Drying times at 10°C: Recoatable: after approx. 18 hours
  • Service life (time between painting and wetting) at 10°C: min. 24 hours to 6 months

Further information on processing can be found in the technical data sheet under "Downloads".

more information
Show 2 articles


Downloads

VENEZIANI EUROSPRINT ECO is a biocide-free, solvent-based paint for underwater hulls. Thanks to the hard matrix, it is also suitable for high sailing speeds. The paint can be applied to all substrates and is suitable for mixed and fresh waters.

Technical data

  • Area of application: Waters with medium fouling
  • Boat type: Motor and sailing boats of all speeds
  • Substrate (with appropriate primer): all materials, including aluminum
  • Coverage: approx. 12.5 m²/l
  • Dilution: VENEZIANI Thinner 6470
  • Application method: Brush, roller, spraying (professional use only)
  • Drying times at 10°C: Recoatable: after approx. 18 hours
  • Service life (time between painting and wetting) at 10°C: min. 24 hours to 6 months

Further information on processing can be found in the technical data sheet under "Downloads".

Questions about the product?

Last seen products

More articles from this category

EPIFANES FOUL AWAY Biocide Free
EPIFANES FOUL AWAY Biocide Free
A self-polishing underwater paint, free of copper, tin and organic biocides.Suitable for freshwater- brackish water and intermittent saltwater areas.Suitable for all boat building materials. Adheres to all hard antifoulings and self-polishing antifoulings.Three coats are recommended as initial application.Yield: approx. 10 m²/l. Thinner: EPIFANES D-100 ThinnerThe colors on the color sample card may differ from the original colors due to monitor or printer settings and are only intended as a guide.Use biocidal products with care. Always read the label and product information before use.

From €68.90 *
Details
YACHTCARE hard antifouling ACTION
YACHTCARE hard antifouling ACTION
Economical and effective hard antifouling with copper bonding as active component and an indissoluble binder.As such it offers excellent antifouling protection especially for speed boats, trailer boats and boats that fall dry in tidal waters.Developed for the north European coastal and inland waters.Apart from aluminium it can be applied on all surfaces and boat materials.Yield: 13m²/l. Use biocide products safely. Always read the label and product information before use.

From €36.95 *
Details
SEAJET 037 COASTAL Antifouling
SEAJET 037 COASTAL Antifouling
SEAJET 037 COASTAL is a hard antifouling with a hard matrix that is particularly suitable for fast boats and coastal areas where boats can fall dry. Also suitable for salt and fresh water areas. Can be applied to all boatbuilding materials (except aluminum). 2-3 coats are recommended as a base coat.Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 70 knotsSubstrate: all materials except aluminum (with appropriate primer)Coverage: approx. 10 m²/lThinner: SEAJET THINNER AApplication method: Brush, roller, spraying (professional use only)Drying times at 10°C: Dust-dry: approx. 4.5 hours, recoatable: after approx. 9 hours.Time between painting and wetting at 10°C: at least 10 hours.For processing information, please refer to the technical data sheet under "Downloads".

From €35.90 *
Details
HEMPEL HARD RACING TecCel Hard Antifouling
HEMPEL HARD RACING TecCel Hard Antifouling
Highly effective premium hard antifouling with copper compounds as the active ingredient, which offers optimum fouling protection due to the hard binder, especially on fast motorboats, trailer boats and boats that fall dry in the mudflats.Suitable for all waters. Modified with TecCel non-stick technology (PTFE), it is smoother and has less friction than conventional hard antifoulings. Can be applied to all hull materials except aluminum (exception: white). Detailed application information can be found under "Downloads & Information".Coverage: approx. 13 m²/l Thinner: HEMPEL Thinner No. 808 (max. 5%)

From €38.90 *
Details
HEMPEL ECOPOWER Racing biocide free
HEMPEL ECOPOWER Racing biocide free
Biocide free hard antifouling with Teccel anti adhesion technology (PTFe) for specially even and low-friction surfaces.Recomended for all waters with little fouling growth (fresh water bodies) and for all waters with high environmental regulations. Suitable for all boat building materials. Thinner: 808.Yield: approx. 12,3 m²/l. For more than 100 years HEMPEL produces ship paints and today is one of the worldwide leading producers in this field. HEMPEL is especially known for its great varnishes and the perfected premium antifoulings among their yacht paints. As well as the products for the mega yachts and the commercial shipping, that will be applied by the professional user, which we can offer on demand.

From €33.90 *
Details
HEMPEL ECOPOWER Cruise biocide free
HEMPEL ECOPOWER Cruise biocide free
Biozidfreies, selbstpolierendes Antifouling, dessen Oberfläche sich durch Reibung im Wasser immer wieder selbst reinigt.Saisonbedingter Bewuchs lässt sich mit Bürsten oder Hochdruckreinigen problemlos entfernen.Schleifen der gereinigten Oberfläche vor dem Folgeanstrich ist nicht notwendig.Empfohlen für alle Gewässer mit geringem Bewuchsdruck (Süßwasser) und hohen Umweltanforderungen. Geeignet für alle Bootsbaumaterialien. Thinner: 808.Yield: approx. 14,3 m²/l. Antifouling tip When completely renewing the underwater coat it makes sense - after first sealing with an Epoxy primer (i.e. Light Primer) - to firstly apply a coat of hard antifouling before two coats of selfpolishing antifouling in another colour. This can save time and money, because only when the colour of the first coat of paint becomes visible, will it become necessary to apply new coats of selfpolishing antifouling. For more than 100 years HEMPEL produces ship paints and today is one of the worldwide leading producers in this field. HEMPEL is especially known for its great varnishes and the perfected premium antifoulings among their yacht paints. As well as the products for the mega yachts and the commercial shipping, that will be applied by the professional user, which we can offer on demand.

From €39.90 *
Details
HEMPEL HEMPASPEED TF Thin-Film Bottom Coating
HEMPEL HEMPASPEED TF Thin-Film Bottom Coating
HEMPASPEED TF is a biocide-free antifouling. It forms such a smooth surface that fouling is minimized and friction is reduced. The new hydrogel technology in the HEMPASPEED TF is a combination of thin layer and hard antifouling. That means it is as robust as a hard antifouling, but with an ultra-smooth surface. It protects against fouling and is easy to clean without chemicals. Suitable for fresh, salt and brackish water as well as for inland areas. Particularly recommended in areas where biocides may not be used or only to a limited extent (also in the Netherlands). Suitable for all sports boats with GRP, steel or aluminum hulls, also for regatta and trailer boats. Application on existing antifouling layerIt is possible to switch from a conventional antifouling to HEMPASPEED TF. The old coating (if it is still intact) does not have to be removed. A layer of HEMPEL CONVERSION Primer is then required as an intermediate layer. Two coats of HEMPASPEED TF should be applied over the primer. Application as a new coating When recoating, the substrate must first be sealed with HEMPEL LIGHT Primer before applying HEMPEL CONVERSION Primer and two coats of HEMPASPEED TF. Note the instructions on the product data sheet. A maximum of 3 months should elapse between application and putting the product in the water, ideally 30 hours at around 15°Application with brush or roller Dilute with Thinner 808 (No 3) (Art. No. 2577-020) Available in four shades: True Blue (blue), Ultimate White (white), Black (black) and Penta Gray (grey). Yield: approx. 11 m²/l.

From €44.90 *
Details
LEFANT T-COAT 2K Bottom Coating
LEFANT T-COAT 2K Bottom Coating
LeFANT T-COAT is a biocide-free coating for underwater hulls based on epoxy resin. It forms a hard, smooth surface that makes it difficult for growth such as algae to adhere and also protects the hull from moisture penetration. LeFANT T-COAT is free of silicones and metals and is suitable for all waters. If fouling adheres to the surface, it can be easily removed mechanically using cleaning sponges, brushes or hull cleaning systems.Technical dataArea of application: Waters with light to medium foulingBoat type: fast motor and sailing boats, trailer boatsMaterials (with primer): GRP/plastic, steel, aluminumCoverage: 4-6m²/lDilution: NonePre-treatment: Existing antifouling and one-component paints must be completely removed. Existing epoxy systems in good condition can be retained. For better adhesion and sealing of porous, sandblasted or rough surfaces and for recoating, an epoxy-based primer, such as LEFANT Epoxy Primer, is recommended (first coat diluted with 20-30% LEFANT Multi-Thinner).Application method: Brush or rollerApplication temperature: Minimum 7 °C, an ideal application temperature is 15-25 °C. To improve conditions for application at lower temperatures, use for example a heating element that can be placed close to the surface and then place the paint can in a bath of heated water.Application: Mix the primer with the desired color additive, add hardener and stir thoroughly. One paint pot contains 55 ml of paint and is sufficient for a 750 ml can. 2-3 coats (approx. 100 microns/coat) are recommended for a new structure, 3-4 coats for the color white. For a particularly smooth “racing surface”, the hardened surface can be sanded smooth with wet sandpaper. Further information on processing can be found in the technical data sheet under “Downloads”

€72.80 *
Details
LeFANT NAUTICA HARD ECO biocide free antifouling
LeFANT NAUTICA HARD ECO biocide free antifouling
NAUTICA HARD ECO is a biocide-free underwater coating from the Swedish company LEFANT, suitable for sail and power boats in all speed ranges.The hard matrix in the coating provides a smooth, low-friction surface which protects the boat from fouling and is easy to clean. A clean underwater hull increases speed and helps reduce fuel consumption.NAUTICA HARD ECO is suitable for use on aluminium hulls and is compatible with most self-polishing and hard antifouling. Can be painted directly onto LEFANT TF and LEFANT MARK 5. Two coats last for seasonal protection, extra coats in areas where friction and wear are higher, such as rudder, stern and waterline might be neccessary.Coverage: 13 m²/litreFor the application of Lefant Nautica Hard ECO, please see the detailed instructions on the technical data sheet under "Downloads & Information".PLEASE NOTE: The color black is currently not available. Alternatively, select a biocide-free hard antifouling (e.g. YACHTCARE Protector Hard )

From €59.00 *
Details
HEMPEL ECOPOWER PROP Propeller-Spray
HEMPEL ECOPOWER PROP Propeller-Spray
Biocide-free spray coating for propellers, Z-drives and stern drives. Protects against fouling and makes cleaning easier. Advanced binder technology controls the self-renewing effect throughout the season.For use on uncoated surfaces, priming with HEMPELS Prop Primer is recommended.For existing, old or traditional antifouling, remove loose material and fouling beforehand; on surfaces with existing, old hard matrix or unknown antifouling, the surface should also be wet-sanded (180 grit). Then clean and dry the surface. If the condition of the previous antifouling layer is poor, seal with a layer of primer (e.g. HEMPELS Underwater Primer).For detailed application instructions, please refer to the technical product data sheet under "Downloads".Theoretical coverage 11m2/ l

Content: 0.5 Liter (€0.00* / 1 Liter)

From €28.91 *
Details
HEMPEL SILIC ONE Propeller-Kit
HEMPEL SILIC ONE Propeller-Kit
HEMPEL's SILIC ONE propeller kit is an innovative, biocide-free coating for propellers with technological properties that ensure less frictional resistance and the best possible fouling protection.SILIC ONE is a copper- and biocide-free fouling release coating system based on silicone and hydrogel. Polymers in the coating react with water on the surface and form an invisible protective layer, a so-called hydrogel, between the hull surface and the water. For microorganisms, this layer is perceived as a liquid, so that they do not attach themselves to the hull in the first place. On the other hand, the micro-rough structure and the smooth surface tension prevent fouling organisms from becoming firmly anchored, so that they fall off again through manual cleaning or when moving quickly through the water.Suitable for fresh, salt and brackish water as well as inland areas. Particularly recommended in areas where biocides may not be used or only to a limited extent (also in the Netherlands).The Propller-Kit consists of:1x 375 ml SilicOne TieCoat,1x 375 ml SilicOne in blackImportant: Please note that the propeller must be free of any old paint/antifouling. We recommend that you adhere very closely to the processing instructions and recoating intervals in the application data sheet.For first time coating it is recommended to use HEMPEL Light Primer, which you have to order seperately.

€59.90 *
Details
SEAJET 021 EKO Biocide-free Underwater Coating
SEAJET 021 EKO Biocide-free Underwater Coating
SEAJET 021 EKO is a biocide-free underwater coating that forms a hydrolysis-based, erodible layer that is constantly renewed, making it difficult for dirt and fouling to adhere. It is applied like a conventional antifouling, two coats last a season. Suitable for fresh and salt water areas with light to medium fouling pressure, regular cleaning of the surface is recommended during the year.SEAJET 021 EKO can be painted on primed wood, GRP, steel and aluminum. Suitable for boats with maximum speeds of up to 40 knots.Application: For a new coating of the underwater hull, 2 coats of SEAJET 117 Epoxy Primer are suitable for priming, for wooden hulls SEAJET 015 Underwater Primer. Then apply 2 coats of SEAJET 021 EKO. When applying to existing antifouling, compatibility should be checked beforehand, e.g. using the SEAJET compatibility table. Clean underwater coatings in good condition, apply 1 coat of SEAJET 015 Underwater Primer, then apply 2 coats of SEAJET 021 EKO.Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials (with suitable primer)Coverage: approx. 10 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, spraying (professional use only)Drying times at 10°C: Dust-dry: approx. 2 hours, recoatable: after approx. 7 hours.Time between painting and launching at 10°C: min. 12 hours.For information on processing, please refer to the technical data sheet under "Downloads".

Content: 0.7519 Liter (€0.00* / 1 Liter)

From €29.90 *
Details
YACHTCARE PROTECTOR HARD Bioicde Free Bottom Paint
YACHTCARE PROTECTOR HARD Bioicde Free Bottom Paint
Hard, biocide-free underwater coating for sail and motor boats made of GRP, steel, wood or aluminum. Contains the LUBRICATOR FLUID developed by YACHTCARE, which makes it more difficult for fouling to adhere to the surface.Application: When rebuilding, the hull should be primed accordingly, e.g. with YACHTCARE Antifouling Primer or YACHTCARE Epoxy Primer. On existing hard antifouling, the coating can be applied directly to conventional hard antifouling (not PTFE-containing) after light sanding; a conversion primer is not necessary.Area of application: all northern European inland and coastal waters with light to medium fouling conditions. Coverage: 11m²/l Dilution: not necessary

From €42.90 *
Details
YACHTCARE SAFEGUARD SP Bioicde Free Bottom Paint
YACHTCARE SAFEGUARD SP Bioicde Free Bottom Paint
YACHTCARE SAFEGUARD SP is a self-polishing, biocide-free underwater coating for sailing areas with light to medium fouling. It is suitable for sail and motor boats made of GRP, steel, wood or aluminum. LUBRICATOR FLUID, a special additive specially developed by YACHTCARE, makes it more difficult for fouling to adhere to the surface and facilitates cleaning after the boat has been craned. SAFEGUARD SP can be applied to most sanded hard and self-polishing antifoulings, an adhesion primer is not required. Not suitable for painting on thin film antifouling.&nbsp

From €34.90 *
Details
VENEZIANI EUROSPRINT ECO Biocide Free UW-Paint
VENEZIANI EUROSPRINT ECO Biocide Free UW-Paint
VENEZIANI EUROSPRINT ECO is a biocide-free, solvent-based paint for underwater hulls. Thanks to the hard matrix, it is also suitable for high sailing speeds. The paint can be applied to all substrates and is suitable for mixed and fresh waters.Technical dataArea of application: Waters with medium foulingBoat type: Motor and sailing boats of all speedsSubstrate (with appropriate primer): all materials, including aluminumCoverage: approx. 12.5 m²/lDilution: VENEZIANI Thinner 6470Application method: Brush, roller, spraying (professional use only)Drying times at 10°C: Recoatable: after approx. 18 hoursService life (time between painting and wetting) at 10°C: min. 24 hours to 6 monthsFurther information on processing can be found in the technical data sheet under "Downloads".

From €47.90 *
Details