Go to homepage
€0.00*
Jobs
Catalogue
Quick order

YACHTCARE SAFEGUARD SP Bioicde Free Bottom Paint

from €34.90*

Content: 0.7519

€34.90*

Content: 0.7519 Liter (€46.42* / 1 Liter)

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

colour
contents
Ds

YACHTCARE SAFEGUARD SP is a self-polishing, biocide-free underwater coating for sailing areas with light to medium fouling. It is suitable for sail and motor boats made of GRP, steel, wood or aluminum. LUBRICATOR FLUID, a special additive specially developed by YACHTCARE, makes it more difficult for fouling to adhere to the surface and facilitates cleaning after the boat has been craned. SAFEGUARD SP can be applied to most sanded hard and self-polishing antifoulings, an adhesion primer is not required. Not suitable for painting on thin film antifouling.&nbsp

more information
Show 6 articles


YACHTCARE SAFEGUARD SP is a self-polishing, biocide-free underwater coating for sailing areas with light to medium fouling. It is suitable for sail and motor boats made of GRP, steel, wood or aluminum. LUBRICATOR FLUID, a special additive specially developed by YACHTCARE, makes it more difficult for fouling to adhere to the surface and facilitates cleaning after the boat has been craned. SAFEGUARD SP can be applied to most sanded hard and self-polishing antifoulings, an adhesion primer is not required. Not suitable for painting on thin film antifouling.&nbsp

Questions about the product?

Last seen products

More articles from this category

EPIFANES FOUL AWAY Biocide Free
EPIFANES FOUL AWAY Biocide Free
A self-polishing underwater paint, free of copper, tin and organic biocides.Suitable for freshwater- brackish water and intermittent saltwater areas.Suitable for all boat building materials. Adheres to all hard antifoulings and self-polishing antifoulings.Three coats are recommended as initial application.Yield: approx. 10 m²/l. Thinner: EPIFANES D-100 ThinnerThe colors on the color sample card may differ from the original colors due to monitor or printer settings and are only intended as a guide.Use biocidal products with care. Always read the label and product information before use.

From €68.90 *
Details
EPIFANES COPPER CRUISE Antifouling
EPIFANES COPPER CRUISE Antifouling
Highly efficient, hard antifouling that incorporates copper and biocides with a selfpolishing effect and exceptional long-term fouling protection in saltwater, fresh water and brackish water. It is aprroved for the use in the Netherlands (approval no. 14301).The innovative 'Copper Release Technology' combines the advantages of hard and selfpolishing antifoulings.With highly improved encrustation protection, compared to conventional copper carrying antifoulings, here the active agents are optimised and released in considerable smaller amounts, which is favourable for the environment.Can be used with most other commercially available underwater primers without any problems as well as on most hard and selfpolishing antifoulings. Suitable for all sailing and motor vessels with a maximum speed of 30 knots, as well as all hull materials except aluminium.Not suitable for boats moored permanently, vessels which are not moved for the whole season.Yield: approx. 10 m²/l The colours on the colours chart may change slightly depending on your printer or computer screen settings. Use biocide products safely. Always read the label and product information before use. BAuA-Nr. N-74891

From €45.90 *
Details
YACHTCARE SP Self Polishing Antifouling
YACHTCARE SP Self Polishing Antifouling
A self-polishing antifouling with copper bindings and bioactive, organic active ingredients. Intended for use in fresh, salt and brackish water. Through the self-renewing effect the paint retains a bioactive surface throughout its entire life.YACHTCARE self polishing antifouling is compatible with most other antifouling systems.It is applicable on wood, GRP and steel. Not applicable for aluminum bases. Thinner: YACHTCARE ANTIFOULING THINNERRequirement: 12.5 m.sq./l Use biocide products safely. Always read the label and product information before use. BAuA-Nr. N-74363

From €34.50 *
Details
SEAJET 033 SHOGUN antifouling
SEAJET 033 SHOGUN antifouling
Very effective, self-polishing antifouling, even in difficult fouling conditions.Suitable for all boat building materials except aluminum. Adheres to most hard and self-polishing antifoulings (not to those containing Teflon). Sanding before the next coat is not necessary. 2-3 coats last for 2 seasons.Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials except aluminumCoverage: approx. 8.8 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, spraying (professional use only)Drying times at 10°C: Dust-dry: approx. 2 hours, recoatable: after approx. 8 hoursTtime between painting and launching at 10°C: min. 18 hours to 6 monthsFor information on processing, please refer to the technical data sheet under "Downloads".

From €54.00 *
Details
SEAJET PROFESSIONAL 032 Antifouling
SEAJET PROFESSIONAL 032 Antifouling
SEAJET PROFESSIONAL 032 is an economical, self-polishing antifouling with copper compounds as the active ingredient. This antifouling was developed for small commercial and work boats and traditional sailing boats in salt, brackish and fresh water areas.Suitable for all boat building materials except aluminum. No sanding required before a subsequent coat.Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials except aluminumCoverage: approx. 8.7 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, spraying (professional use only)Drying times at 10°C: Dust-dry: approx. 2 hours, recoatable: after approx. 7 hoursTime between painting and launching at 10°C: min. 16 hours to 6 monthsFor information on processing, please refer to the technical data sheet under "Downloads".

From €129.00 *
Details
SEAJET SAMURAI 031 Antifouling
SEAJET SAMURAI 031 Antifouling
SEAJET 031 SAMURAI is a slow-eroding antifouling with good all-round performance for waters with medium fouling conditions. It is suitable for all boatbuilding materials except aluminum and adheres to most hard and self-polishing antifoulings (not to Teflon and tin-containing antifoulings).Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials except aluminum (with suitable primer)Coverage: approx. 9 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, sprayingDrying times: Dust-dry: approx. 2 hours, recoatable: after approx. 6 hoursService life (time between painting and wetting): min. 24 hours to 6 monthsInformation on Application can be found in the technical data sheet under "Downloads".

From €38.95 *
Details
SEAJET EMPEROR A 034 Self-polishing Antifouling Paint
SEAJET EMPEROR A 034 Self-polishing Antifouling Paint
SEAJET Emperor 034 A is a slowly eroding (=self-polishing) antifouling that contains no copper and is therefore also suitable for aluminum hulls. Its effective formulation makes it suitable for use in tropical saltwater areas with high fouling pressure.Technical dataArea of application: Waters with heavy foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials, including aluminum (with suitable primer)Coverage: approx. 10 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, sprayingDrying times: Dust-dry: approx. 3 hours, recoatable: after approx. 12 hoursTime between painting and wetting: min. 24 hours to 6 monthsFor further application information, please refer to the technical data sheet under "Downloads".

From €59.90 *
Details
HEMPEL MILLE NCT Self Polishing Antifouling
HEMPEL MILLE NCT Self Polishing Antifouling
Selfpolishing premium antifouling with highly effective antifouling protection per copper bonding and organic agents.By the use of the NCT technology (NewCopperTechnology) it succeeds to make use of the copper bonding even more continuously and controlled for more economic and effective usage.The selfpolishing effect of the antifouling provides for an always smooth, bioactive and low friction surface, which doesn't need to be sanded for the succeeding coat.Applicable to all surfaces and boat materials (with the exception of aluminium) as well as for the employment in all waters.Thinner: 808.Yield: approx. 13 m²/l. Use biocide products safely. Always read the label and product information before use.

From €38.90 *
Details
HEMPEL ECOPOWER Racing biocide free
HEMPEL ECOPOWER Racing biocide free
Biocide free hard antifouling with Teccel anti adhesion technology (PTFe) for specially even and low-friction surfaces.Recomended for all waters with little fouling growth (fresh water bodies) and for all waters with high environmental regulations. Suitable for all boat building materials. Thinner: 808.Yield: approx. 12,3 m²/l. For more than 100 years HEMPEL produces ship paints and today is one of the worldwide leading producers in this field. HEMPEL is especially known for its great varnishes and the perfected premium antifoulings among their yacht paints. As well as the products for the mega yachts and the commercial shipping, that will be applied by the professional user, which we can offer on demand.

From €33.90 *
Details
HEMPEL ECOPOWER Cruise biocide free
HEMPEL ECOPOWER Cruise biocide free
Biozidfreies, selbstpolierendes Antifouling, dessen Oberfläche sich durch Reibung im Wasser immer wieder selbst reinigt.Saisonbedingter Bewuchs lässt sich mit Bürsten oder Hochdruckreinigen problemlos entfernen.Schleifen der gereinigten Oberfläche vor dem Folgeanstrich ist nicht notwendig.Empfohlen für alle Gewässer mit geringem Bewuchsdruck (Süßwasser) und hohen Umweltanforderungen. Geeignet für alle Bootsbaumaterialien. Thinner: 808.Yield: approx. 14,3 m²/l. Antifouling tip When completely renewing the underwater coat it makes sense - after first sealing with an Epoxy primer (i.e. Light Primer) - to firstly apply a coat of hard antifouling before two coats of selfpolishing antifouling in another colour. This can save time and money, because only when the colour of the first coat of paint becomes visible, will it become necessary to apply new coats of selfpolishing antifouling. For more than 100 years HEMPEL produces ship paints and today is one of the worldwide leading producers in this field. HEMPEL is especially known for its great varnishes and the perfected premium antifoulings among their yacht paints. As well as the products for the mega yachts and the commercial shipping, that will be applied by the professional user, which we can offer on demand.

From €39.90 *
Details
SIGMA ECOFLEET 290S antifouling
SIGMA ECOFLEET 290S antifouling
Tin-free, self-polishing longtime antifouling from the shipping industry.Fouling protection for up to 36 months in all waters.The base consists of bioactive, organic materials and copper compounds.Can cover most hard and ablative antifoulings.Must not be applied over old antifoulings containing teflon or tin..As a base or bonding agent, SIGMA VIKOTE CR-Primer is recommended.Yield: approx. 7 m.sq./l.Colour: red brown.Thinner: 21-06 (article-no 2580-101).Use biocidal products with care! Please read the information on the lable and the instruction leaflet before use. BAuA-Nr. N-52694

From €147.00 *
Details
HEMPEL HEMPASPEED TF Thin-Film Bottom Coating
HEMPEL HEMPASPEED TF Thin-Film Bottom Coating
HEMPASPEED TF is a biocide-free antifouling. It forms such a smooth surface that fouling is minimized and friction is reduced. The new hydrogel technology in the HEMPASPEED TF is a combination of thin layer and hard antifouling. That means it is as robust as a hard antifouling, but with an ultra-smooth surface. It protects against fouling and is easy to clean without chemicals. Suitable for fresh, salt and brackish water as well as for inland areas. Particularly recommended in areas where biocides may not be used or only to a limited extent (also in the Netherlands). Suitable for all sports boats with GRP, steel or aluminum hulls, also for regatta and trailer boats. Application on existing antifouling layerIt is possible to switch from a conventional antifouling to HEMPASPEED TF. The old coating (if it is still intact) does not have to be removed. A layer of HEMPEL CONVERSION Primer is then required as an intermediate layer. Two coats of HEMPASPEED TF should be applied over the primer. Application as a new coating When recoating, the substrate must first be sealed with HEMPEL LIGHT Primer before applying HEMPEL CONVERSION Primer and two coats of HEMPASPEED TF. Note the instructions on the product data sheet. A maximum of 3 months should elapse between application and putting the product in the water, ideally 30 hours at around 15°Application with brush or roller Dilute with Thinner 808 (No 3) (Art. No. 2577-020) Available in four shades: True Blue (blue), Ultimate White (white), Black (black) and Penta Gray (grey). Yield: approx. 11 m²/l.

From €44.90 *
Details
LEFANT T-COAT 2K Bottom Coating
LEFANT T-COAT 2K Bottom Coating
This light and biocide-free underwater coating is similar to a hard antifouling while being eco-friendly and easy to clean. The epoxy-resin-based coating produces a smooth, dense surface that protects the hull against moisture and corrosion as well as from bio fouling such as algae. LeFant T-Coat is free of silicones and metals and suitable for the use in open and closed waters (e.g. lakes, rivers). If fouling becomes attached to the surface, it can be easily removed mechanically with cleaning sponges, brushes or hull cleaning systems.Suitable GRP/plastic, steel, aluminum. Please note that existing antifouling and one-component underwater primers must be completely removed prior to application of T-Coat. Existing epoxy coating systems in good condition may be retained. For better adhesion and sealing of porous, sandblasted or rough surfaces, as well as when recoating, it is recommended to prime with an epoxy resin based primer like the LEFANT Epoxy Primer, (first coat thinned with 20-30% LEFANT Multi Thinner).To achieve a smooth "racing" surface, the paint can be wet sanded over with a fine grit after curing.Working temperature: minimum 7 °C, an ideal working temperature at 15-25 °C.Color mixing: Mix the primer with the desired color additive, add hardener and stir thoroughly. One paint pot contains 55 ml of paint and is sufficient for a 750 ml can of coating.Coverage: 4-6m²Application: Apply with brush or roller, one 750 ml container is sufficient for about 6m². 2-3 coats (approx. 100 microns/coat) are recommended for a new structure, 3-4 coats for the color white. For the safe and correct application of Lefant T-Coat, please read the product data sheet. You will find it below under "Downloads & Information".

From €72.80 *
Details
HEMPEL ALU-PROP-NCT 750ml Antifouling
HEMPEL ALU-PROP-NCT 750ml Antifouling
High performance, self-polishing antifouling. Excellent fouling protection due to patented binder technology from HEMPEL. Especially for aluminum boats, but can also be used for boats made of GRP, wood, steel as well as propeller drives.Application with roller or brush possible. Recommended Primer for underground preparation: Hempel Light Primer or Hempel's Underwater Primer.Coverage: 13m2/litreThinner: Hempel 808 (No. 3)For the right application, please follow the instructions in the technical data sheet under "Downloads and Information".

Content: 0.5 Liter (€0.00* / 1 Liter)

From €35.90 *
Details
LeFANT NAUTICA HARD ECO biocide free antifouling
LeFANT NAUTICA HARD ECO biocide free antifouling
NAUTICA HARD ECO is a biocide-free underwater coating from the Swedish company LEFANT, suitable for sail and power boats in all speed ranges.The hard matrix in the coating provides a smooth, low-friction surface which protects the boat from fouling and is easy to clean. A clean underwater hull increases speed and helps reduce fuel consumption.NAUTICA HARD ECO is suitable for use on aluminium hulls and is compatible with most self-polishing and hard antifouling. Can be painted directly onto LEFANT TF and LEFANT MARK 5. Two coats last for seasonal protection, extra coats in areas where friction and wear are higher, such as rudder, stern and waterline might be neccessary.Coverage: 13 m²/litreFor the application of Lefant Nautica Hard ECO, please see the detailed instructions on the technical data sheet under "Downloads & Information".PLEASE NOTE: The color black is currently not available. Alternatively, select a biocide-free hard antifouling (e.g. YACHTCARE Protector Hard )

From €59.00 *
Details
HEMPEL ECOPOWER PROP Propeller-Spray
HEMPEL ECOPOWER PROP Propeller-Spray
Biocide-free spray coating for propellers, Z-drives and stern drives. Protects against fouling and makes cleaning easier. Advanced binder technology controls the self-renewing effect throughout the season.For use on uncoated surfaces, priming with HEMPELS Prop Primer is recommended.For existing, old or traditional antifouling, remove loose material and fouling beforehand; on surfaces with existing, old hard matrix or unknown antifouling, the surface should also be wet-sanded (180 grit). Then clean and dry the surface. If the condition of the previous antifouling layer is poor, seal with a layer of primer (e.g. HEMPELS Underwater Primer).For detailed application instructions, please refer to the technical product data sheet under "Downloads".Theoretical coverage 11m2/ l

Content: 0.5 Liter (€0.00* / 1 Liter)

From €28.90 *
Details
HEMPEL SILIC ONE Propeller-Kit
HEMPEL SILIC ONE Propeller-Kit
HEMPEL's SILIC ONE propeller kit is an innovative, biocide-free coating for propellers with technological properties that ensure less frictional resistance and the best possible fouling protection.SILIC ONE is a copper- and biocide-free fouling release coating system based on silicone and hydrogel. Polymers in the coating react with water on the surface and form an invisible protective layer, a so-called hydrogel, between the hull surface and the water. For microorganisms, this layer is perceived as a liquid, so that they do not attach themselves to the hull in the first place. On the other hand, the micro-rough structure and the smooth surface tension prevent fouling organisms from becoming firmly anchored, so that they fall off again through manual cleaning or when moving quickly through the water.Suitable for fresh, salt and brackish water as well as inland areas. Particularly recommended in areas where biocides may not be used or only to a limited extent (also in the Netherlands).The Propller-Kit consists of:1x 375 ml SilicOne TieCoat,1x 375 ml SilicOne in blackImportant: Please note that the propeller must be free of any old paint/antifouling. We recommend that you adhere very closely to the processing instructions and recoating intervals in the application data sheet.For first time coating it is recommended to use HEMPEL Light Primer, which you have to order seperately.

€59.90 *
Details
SEAJET 021 EKO Biocide-free Underwater Coating
SEAJET 021 EKO Biocide-free Underwater Coating
SEAJET 021 EKO is a biocide-free underwater coating that forms a hydrolysis-based, erodible layer that is constantly renewed, making it difficult for dirt and fouling to adhere. It is applied like a conventional antifouling, two coats last a season. Suitable for fresh and salt water areas with light to medium fouling pressure, regular cleaning of the surface is recommended during the year.SEAJET 021 EKO can be painted on primed wood, GRP, steel and aluminum. Suitable for boats with maximum speeds of up to 40 knots.Application: For a new coating of the underwater hull, 2 coats of SEAJET 117 Epoxy Primer are suitable for priming, for wooden hulls SEAJET 015 Underwater Primer. Then apply 2 coats of SEAJET 021 EKO. When applying to existing antifouling, compatibility should be checked beforehand, e.g. using the SEAJET compatibility table. Clean underwater coatings in good condition, apply 1 coat of SEAJET 015 Underwater Primer, then apply 2 coats of SEAJET 021 EKO.Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials (with suitable primer)Coverage: approx. 10 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, spraying (professional use only)Drying times at 10°C: Dust-dry: approx. 2 hours, recoatable: after approx. 7 hours.Time between painting and launching at 10°C: min. 12 hours.For information on processing, please refer to the technical data sheet under "Downloads".

Content: 0.7519 Liter (€0.00* / 1 Liter)

From €29.90 *
Details
YACHTCARE PROTECTOR HARD Bioicde Free Bottom Paint
YACHTCARE PROTECTOR HARD Bioicde Free Bottom Paint
Hard, biocide-free underwater coating for sail and motor boats made of GRP, steel, wood or aluminum. Contains the LUBRICATOR FLUID developed by YACHTCARE, which makes it more difficult for fouling to adhere to the surface.Application: When rebuilding, the hull should be primed accordingly, e.g. with YACHTCARE Antifouling Primer or YACHTCARE Epoxy Primer. On existing hard antifouling, the coating can be applied directly to conventional hard antifouling (not PTFE-containing) after light sanding; a conversion primer is not necessary.Area of application: all northern European inland and coastal waters with light to medium fouling conditions. Coverage: 11m²/l Dilution: not necessary

From €42.90 *
Details
2577*33 HEMPEL CLASSIC Antifouling
HEMPEL CLASSIC Antifouling
Robust and reliable, self polishing antifouling with copper compounds as active agent. Sanding is not necessary before subsequent coatings. Applicable for all boat building materials except aluminium.Ecological protection for the whole season in salt water, brackish water and fresh water sailing areas in moderate temperatures.Yield: ca.11 m²/lThis product is approved for the use in the Netherlands (approval no. 15010). Use biocidal products safely! Please refer to the Technical Product Data Sheet under "Downloads & Information" for the correct application of the product.

From €23.90 *
Details