Skip to main content


EPIFANES Nonskid Deckcoating is a one-component, semi-gloss nonskid deck paint based on urethane/alkyd resin. It contains polypropylene beads that form a non-slip surface on the surface of the paint.

Applicable as a finishing coat on a one component paint system on wood, steel, aluminum, gelcoat/glass.

Thinner: EPIFANES paint thinner
Yield: 4-8 m²/l.

Note color chart: Due to monitor or printer settings, the colors may deviate from the original color shades and are therefore only intended as a guide.

Legal information about the product
CLP Regulation
Symbols ghs02 ghs07
Signalword Attention!
H phrases H226, H336
P phrases P102, P210, P260, P271, P280, P301+P310, P303+P361+P353, P501

Last seen products

More articles from this category

EPIFANES Anti-slip Additive
Anti-slip additive for EPIFANES MONO-URETHANE or EPIFANES POLY-URETHANE DD Yacht Varnish. By mixing the powder into the paint before application, an anti-slip paint can be mixed in the respective color shade. Can of 20g, sufficient for 750ml of paint.

From €13.50 *
EPIFANES Nonskid Deckcoating
EPIFANES Nonskid Deckcoating is a one-component, semi-gloss nonskid deck paint based on urethane/alkyd resin. It contains polypropylene beads that form a non-slip surface on the surface of the paint. Applicable as a finishing coat on a one component paint system on wood, steel, aluminum, gelcoat/glass. Thinner: EPIFANES paint thinnerYield: 4-8 m²/l.Note color chart: Due to monitor or printer settings, the colors may deviate from the original color shades and are therefore only intended as a guide.

From €38.50 *
HEMPEL ANTI-SLIP PEARLS Additive
Neutral additive for 1- and 2-part paints, to be mixed with the liquid paint for the final coat to create a nonskid surface. With 2-part paints, the hardener and base must be combined first, before the HEMPEL ANTI SLIP balls are carefully mixed in. As a rule, one coat is sufficient to create a nonskid surface. If a stronger structure is desired, you can follow up with a second coat of HEMPEL ANTI SLIP. Coverage: 80 g per 750 ml of paint.

€11.90 *
SIGMA Anti-Slip Powder
Finely ground coconut shells for the use as an additive for non-slip deck paint. The ANTI-SLIP powder is stirred into the paint and applied as the final coat. Can be used with paint colors from SIGMA and other manufacturers.Consumption approx. 50 g/liter

From €7.70 *
COELAN Antislip Glass Powder
This anti-slip additive consists of fine glass granulate and is sprinkled into the freshly applied topcoat or varnish as required. Suitable for COELAN coatings such as Flexo Adhesion Primer, can also be combined with other 1 and 2-component coatings. Size of granules: 105 - 210 μCoverage: as required

€13.90 *
Anti slip tape
Pre-punched, self-adhesive stripes with rounded edges.They are versatile and can be used on the deck, on the companionway and the cockpit.Shipping in sets of 10 stripes each.

From €9.95 *
KIWI GRIP Non-Skid Deck Coating
This unique product from New Zealand is ideal for creating non-slip, slip-resistant surfaces. KIWI GRIP is a one-component, gel-like paint that is easy to apply and resistant to environmental influences such as salt water and UV radiation.Application: KIWI GRIP can be applied with a notched trowel and then worked over with the texture roller supplied to create the rough surface. The "thickness" of the texture can be individually adjusted by diluting the paint with water (up to 10%) or by using fur rollers, for example. Practical: The paint comes in a resealable plastic bag, which enables economical application.Coverage: 2 m²/l (the 4l version contains 4x 1l) Dilution: Water (up to 10%)Detailed application instructions for KIWI GRIP can be found under "Downloads & Information".

From €69.95 *
OWATROL OWAGRIP Anti-Slip Coating
A one-component, polyurethane resin-based coating with a matte finish that can be used as an anti-slip top coat indoors and outdoors. The coating has a double anti-slip effect due to the granulate it contains and the rough texture when it dries. OWAGRIP was specially developed for the extreme weather conditions in the maritime sector, is abrasion-resistant, UV-resistant and anti-corrosive.Can be applied to existing polyurethane, epoxy, alkyd and acrylic-based paint systems.Coverage: 9-10 m²Application tips: The coating should be stirred well before application. A fur roller (mohair or short hair) or a brush can be used for application. Clean the surface well before painting. Sand damaged or rusting surfaces and repair accordingly. For recoating prepared, untreated wooden surfaces or slightly rusting metal surfaces, 5-10% Owatrol oil can be added for the first coat.Please read the technical data sheet prior to use. You can find it under "Downloads and information".

From €69.00 *