High gloss urethane oil-based finishing paint with good abrasion resistance and high filling properties.The yacht paint is a one-component paint and easy to apply, it dries quickly and almost reaches the hardness and resistance of two-component varnishes after hardening.Suitable for interior and exterior use above the waterline, applicable on aluminum, steel and wood, with the appropriate primer. Can also be used to rework intact existing 1- and 2-component paints. On well prepared gelcoat surfaces, the Mono-urethane paint can be applied directly without a primer. Thinner: EPIFANES Brushthinner for Paint & Varnish, EPIFANES 1K-SpraythinnerYield: approx. 15 m²/l.Note color chart: The colors shown may show slight color deviations depending on the settings of your monitor.
An extremely hard, resistant and well covering 2-component color paint with particularly good scratch, impact and abrasion resistance. Due to the very good weather resistance, the color-stable high-gloss finish is retained for a long time even in sun and salt water. Suitable for plywood and non-working hardwoods, and as a finishing coat on epoxy coatings and gelcoat / GRP surfaces. Thinner: EPIFANES POLY-URETHANE Brush Thinner, EPIFANES POLY-URETHANE Spray ThinnerCoverage: 12 m²/kg.Note: This two-component paint cannot be used on 1-component paints. Please note that the accuracy of the displayed color chart depend on the settings of your screen and may be different from the original color.
A high-gloss one-component boat paint with good weather resistance and long-lasting gloss. The paint is easy to apply and is characterized by good flow properties and high covering power. Can be used on all interior and exterior materials above the waterline. Can be used on existing and intact 1- and 2-component paints.Color: WhiteThinner: EPIFANES Brushtinner for Paint & Varnish, EPIFANES 1-component spray thinnerYield: approx. 14 m²/l.
Please specify the exact color shade at the very end of the order process under "Comments"!Please specify the exact color shade at the very end of the ordering process under "Comments"!High gloss urethane oil-based varnish with good resistance and high opacity.The yacht varnish is one-component and easy to apply, dries quickly and after drying almost reaches the hardness and resistance of two-component varnishes.Suitable for interior and exterior use above the waterline, applicable on aluminum, steel and wood, with the appropriate primer. Can also be used to rework intact existing 1- and 2-component paints. On gelcoat, the mono-urethane can also be applied directly to the previously sanded, degreased surface.Thinner: EPIFANES Brushthinner, EPIFANES 1K Spray ThinnerYield: approx. 15 m²/l.In addition to the colors listed in the color chart, all shades of most yacht paint manufacturers and all RAL colors (except metallic and fluorescent) can be mixed at short notice with the EPIFANES MONO-URETHANE paint. The varnish is also available in silk gloss.Delivery time approx. 10 days.
Robust one-component paint for bilge, engine room and etc. Suitable for application on wood, steel, aluminum and GRP with the appropriate primer system.Thinner: EPIFANES Brushthinner for Paint & VarnishYield: 15m²/l
Waterline paint is a high gloss, water and weather resistant, single component paint specially developed for waterline application by the Dutch manufacturer EPIFANES. Suitable for fresh and salt water areas. Can be applied on all materials on a well adhering paint system above the waterline.It is recommended to paint the water pass or waterline with a distance of 5-10cm above the water (at full load), so that the paint does not have a constant water load later. Available in various shades.Yield: approx. 14 m²/l.The color samples may differ from the original color shades due to monitor or printer settings and serve only as a guide.
Simple 1-component fine and smoothing filler for wood and one-component paints above the waterline. The applied layers (max. 1mm thickness) can be sanded after 24 hours and overpainted with one-component products.Color: white.
A one-component, white silk gloss paint (48% gloss) based on urethane-alkyd resin with lightfast pigments.Suitable as a topcoat for interior use on primed materials like polyester, steel, wood and aluminum, or for exterior use above the waterline as a semi-gloss finish over a high gloss paint system.Can also be applied on existing, intact one- and two-component systems. The paint has great flow properties, hiding power and is resistant to abrasion, alcohol and household chemicals. Thinner: EPIFANES Brush Thinner for Paint and VarnishYield: approx. 13 m²/l.
EPIFANES Mulitlux boat paint is a high-quality, one-component white topcoat, e.g. for the bulwark and superstructures.The easy-to-apply paint is particularly UV-stable due to high-quality raw materials and does not yellow.It also retains its gloss for a long time and dirt does not adhere to the surface as well as with more open-pored coatings.Area of application: In interior and exterior areas above the waterline, as a final coat on coated surfaces, or for reworking 1- and 2-component coatings. Can be applied on sanded, degreased gelcoat if properly prepared. Thinner: EPIFANES Paint Thinner, EPIFANES 1-K Spray ThinnerColor: WhiteYield: approx.15 sqm/l.
A high-gloss one-component boat paint with good weather resistance and long-lasting gloss. The paint is easy to apply and is characterized by good flow properties and high covering power. Can be used on all interior and exterior materials above the waterline in combination with the appropriate primer. Can be used on existing and intact 1- and 2-component paint systems as well.Color: Black. Thinner: EPIFANES Brushthinner for Paint & Varnish, EPIFANES 1K Spray ThinnerYield: approx. 14 m²/l.
A high gloss, weather resistant alkyd resin paint with good flow properties and high coverage, available in 46 standard color shades.Suitable for use on primed gelcoat, steel and aluminum surfaces indoors and outdoors above the waterline. Also suitable for reworking existing 1- and 2-component systems. Select the shade from the shade card (the shade may appear slightly different due to your screen settings!). Yield: approx. 15 m²/l.
Extremely hard and well covering 2-component color paint with particularly good scratch, impact and abrasion resistance. Due to the very good weather resistance, the color-stable high-gloss finish is retained for a long time even in sun and salt water.Suitable for application on raw plywood and non-working hardwoods, or as a finishing coat on epoxy coatings and gelcoat / GRP surfaces. Not applicable on 1-component lacquers.Yield: 12 m²/kg.In addition to the colors listed in the color chart, all colors of most yacht paint manufacturers and all RAL colors (except metallic and fluorescent) can be mixed with EPIFANES Poly-urethane-DD Paint at short notice (delivery time approx. 10 days). The individual composition of the color pigments results in different prices depending on the color shade. The paint is also available with a satin gloss.Note on the color chart: Colors may differ from the original colors due to monitor or printer settings and are only intended as a guide.Please specify the exact color shade at the very end of the ordering process under "Comments"!
"Pure gold in the paint" - EPIFANES Boat Varnish GOLD SPECIAL contains a very high proportion of metallic, pure gold dust pigments. This gold varnish was developed for decorative stripes and engravings, ship names, and lettering on classic yachts, where traditionally the gold leaf was processed very elaborately. This EPIFANES boat varnish lets the gold dust shine in the precious metal quite typical shine and color tone and is much easier to process than gold leaf.Instructions:The base for this varnish is the same as all other EPIFANES boat varnishes. However, because of the heavy gold dust, the varnish must be stirred constantly during application. If the gold pigment is unevenly distributed, streaking may occur during varnishing. Therefore, two coats are recommended for the first application.To avoid spreading the gold dust everywhere when sanding the surrounding surfaces, it is recommended to cover the gold varnish with a coat of EPIFANES Clear varnish.
Please specify the exact color shade at the very end of the order process under "Comments"!A weather-resistant hard alkyd paint for interior and exterior surfaces. Available in most colours on request. The varnish is available in high gloss as well as in silk gloss.Good to work with, very good coverage and remaining colour.Yield: approx. 14 m.sq./l.It is possible to mix all shades of colour from most of the boat paint manufacturers and of the RAL colour chart on top of the regular colours of the EPIFANES glossy paint (with the exception of metallic and fluorescent).Shipping in approx. 10 days.
Slip- and abrasion-resistant, black matte varnish (28% gloss) based on a 1-component urethane/alkyd resin for interior and exterior applications.Fast drying and with very good flow properties, as well as good chemical and alcohol resistance.Interior use: On all substrates over suitable primers or undercoats.Exterior use: As a final coat on a protective paint systemThinner: EPIFANES Brush Thinner for Paint and Varnish, EPIFANES 1K Spray ThinnerCoverage: approx. 12 sqm/l.
Very high-gloss, one-component yacht varnish based on a non-yellowing, siliconized alkyd resin.This fast-drying, color-fast topcoat has a smooth flow even when applied by brush and guarantees minimal dirt adhesion as well as long weather resistance and gloss retention.Can be used on GRP, steel, aluminum and wood - with the appropriate primer. In the case of gelcoat, the paint can be applied directly to the sanded, degreased surface. Can be used indoors as well as outdoors above the waterline, in both fresh and salt water environments. Thinner: EPIFANES Brush Thinner for Paint & VarnishYield: approx. 14 m²/l.Note color chart: The color samples may deviate from the original color shades due to monitor or printer settings and serve only as a guide.
Very robust and extremely fast drying deck paint, which provides a semi-gloss finish that also gives it some slip resistance.Suitable for applications above the waterline, especially for the hull, running decks and hatch coamings.The gloss level can be increased with the addition of up to 25% EPIFANES Boat Varnish Clear, and the slip resistance of the paint on running decks can be increased with the addition of EPIFANES Anti-Slip Additive. Can be used on wood, steel and aluminum above the waterline, and for reworking existing intact paint systems.Yield: approx. 12 m²/lShades according to EPIFANES color chart. Due to the matt-glossy surface, slight deviations in color appearance may occur.Yield approx. 8 - 10 sqm/l.
Very robust, tar-free black marine paint (formerly tar varnish / black varnish) with exceptionally good oil and weather resistance, as well as resistance to changing influences of water and air.Can be applied directly to bare steel, wood or existing tar and bitumen coatings.Yield: 10 m²/lNote: Apply the first coat on bare steel and roughened and/or softened (sticky) tar layers withapprox. 20 - 25 % EPIFANES 1K Spray Thinner of the with white spirit and apply with a stiff brush.Apply the following coats loosely with a paint roller (short-haired lambskin roller).
A black protective coating based on bitumen for above and below the waterline.This modern version of the conventional bitumen paint adheres well to raw steel and wood surfaces as well as existing tar and bitumen layers and synthetic primers.It is easy to apply, offers great UV resistance, elasticity and protection against the interchangeable impacts of water and air.Yield: approx. 10 m.sq./l.Note: It is recommended to apply the first layer with 15-25% with EPIFANES 1K-Spraythinner and use a stiff brush to work the paint onto the surface.
HEMPEL MULTICOAT is a one-component, alkyd-based paint with good resistance to water and oil.The paint is characterized by its durability, UV resistance good application properties.Suitable for all boatbuilding substrates inside and outside above the waterline where a semi-gloss finish is desired.Most common applications: Bilge, storage areas or deck surfaces. Can be used as a complete coating system.Suitable thinner: HEMPEL 811Yield approx. 11 m²/l (40 µm).Note: Please observe the application instructions in the technical data sheet before and during application.
High-gloss, weather-resistant 1-component yacht paint based on alkyd resin. Lightfast pigments ensure high coverage capacity and long-lasting colors with long gloss retention. Longer processing time and good flow properties make this paint easy to work with. It can be applied on all common shipbuilding materials inside and outside above the waterline, in combination with the appropriate primer. Thinner: EPIFANES paint thinnerYield: approx.15 sqm/l.
White high-gloss, weather-resistant paint with a modified hard-alkyd base for interior and exterior use.Comes in white and off-white.Yield: approx. 14 m.sq./l.Thinner: 20-05.The former SIGMA brand name was SIGMARIE ENAMEL.
High-quality paint of Alkyd-OWATROL-oil base that can be applied to almost any surface without primer.Can even be applied directly to surfaces where rust was removed by hand.Resists heat up to 175íC.Requirements: approx. 15 m²/l.
Classic high gloss graphite paint on the basis of alkyd and urethan resins. Suitable for many applications on deck, e.g. hatches and bulwark.It creates a smooth and closed-pored surface which does not attract dirt and is easy to clean. Yield: approx.12 sqm/l.
