Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Epoxy-Primer SEAJET 117 Multipurpose

from €52.90*

Content: 1

€52.90*

Content: 1 Liter

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

model
version
packaging
Ds
Seajet 117 is a multi purpose high performance primer for anti fouling and two component topcoats.
The product offers long term durability for fibreglass, steel and aluminium.
It is suitable for all areas of the boat.
Coverage rate: approx. 8,5 m²/l.
Colour: white.
Show 4 articles
📖 View article in the TOPLICHT catalogue

Seajet 117 is a multi purpose high performance primer for anti fouling and two component topcoats.
The product offers long term durability for fibreglass, steel and aluminium.
It is suitable for all areas of the boat.
Coverage rate: approx. 8,5 m²/l.
Colour: white.
Legal information about the product
CLP Regulation
Symbols ghs02 ghs07
Signalword Attention!
H phrases H226, H312+H332, H315, H317, H319, H412
P phrases P101, P102, P261, P271, P280, P501
Questions about the product?

Similar products

Thinner for SEAJET 118 primer
Thinner for SEAJET 118 primer
Thinner E for epoxy primer 117.

€25.60 *
Details

Last seen products

More articles from this category

EPIFANES / EPIFANES red lead
EPIFANES / EPIFANES red lead
According to german legislation this product may only be sent to resellers, professional users and public research institutes.If this applies to you, please request a quotation here.You may also buy this product personally in our showroom in Hamburg.For wood and steel. Classic red lead primer with a modified linseed-oil-alkyd-resin base. As a primer for single-component enamels, it has exceptional rust-proofing qualities and works as good protection on raw wood. Must not be used under water.Yield: 12 sqm/l.

€103.90 *
Details
EPIFANES EPOXY HB COAT Primer
EPIFANES EPOXY HB COAT Primer
A low-solvent, two-component thick film primer based on epoxy resin with zinc phosphate.Ideal as corrosion protection on steel and aluminum, as an osmosis protection layer on GRP and for sealing wood.The primer dries quickly and allows fast build-up of layers due to the higher solids content. Applicable above and below the waterline. For first time application, it is recommended to paint four coats to achieve optimum water impermeability. Can also be used for maintaining existing two-component systems. If the surface is to be painted with an antifouling, a coat of an adhesion primer such as EPIFANES INTERIMCOAT is required.Yield approx. 10 m²/l.

From €54.50 *
Details
EPIFANES INTERIMCOAT Antifouling Primer
EPIFANES INTERIMCOAT Antifouling Primer
A two-component epoxy-vinyl based primer, usable above and below the waterline.The coarse surface texture provides good mechanical adhesion, thus eliminating the need for sanding before the next coat. Can be overcoated with all EPIFANES one- and two-component products. Suitable as an adhesion primer for antifoulings.Note: Do not sand Interimcoat. After drying, wipe with a cleaning agent such as EPIFANES Cleaning Thinner or EPIFANES Fibreglass Prep Cleaner to remove any amino redness from the surface.Thinner: EPIFANES D-601 ThinnerYield approx. 8 m²/l.

€53.40 *
Details
EPIFANES CR Antifouling Primer
EPIFANES CR Antifouling Primer
EPIFANES CR Antifouling Primer is a universal underwater ship primer based on chlorinated rubber. Suitable for use on steel, aluminum, wood and polyester. It dries quickly and can be applied to many pre-treated substrates and old coatings. The chlorinated rubber contained in the primer makes it permanently elastic, allowing it to bridge the natural movement of wood, for example.Coverage: approx. 9 m²/l.Surface conditions: Fouling on old coatings must be removed. The substrate must be clean, degreased, dry, well sanded and free of dust. Wash off salt or other water-soluble contaminants with fresh water. Remove grease and oil with ammonia solution or Epifanes spray thinner for one-component-paints. Remove rust and loose coatings. Soften old tar coatings with an aggressive thinner and/or sand coarsely with P60-80.Application: Steel must be dry and completely free of rust, grease, oil, salt and dirt. Degrease with Epifanes cleaning thinner and clean cloths. Rough sand with P60. Old tar and bitumen layers should be at least seven days old and free of growth. Clean the surface and allow to dry before painting. For a preservative effect on wood, at least five coats should be applied when recoating. Can be painted over with hard and self-polishing antifouling paint. For further application information, please read the technical data sheet.Thinner: EPIFANES D-100 Thinner

From €36.90 *
Details
EPIFANES WASHPRIMER AQ
EPIFANES WASHPRIMER AQ
Solvent-free, water-based one-component adhesive primer.Excellent adhesion to new aluminum, galvanized surfaces and non-ferrous metals, glass and ceramics.Use above and below the waterline, recoatable with all 1 and 2 component products.Apply only thinly without runners, do not sand.Tip: On existing coatings with corrosion damage, use EPIFANES MULTI-MARINE Primer as an adhesion primer.Thinner: WaterYield approx. 16 sqm/l.

From €32.90 *
Details
EPIFANES epoxy primer
EPIFANES epoxy primer
Thin-bodied, well-filling 2-component rust protection primer based on epoxy resin. Has a high resistance to mechanical and chemical stresses, is high filling and easy to sand. Suitable for underwater and above-water application on steel, aluminum, GRP and plywood. Very good anti-corrosion properties due to zinc phosphate content and particularly resistant to under-rusting on damage.Can be recoated with EPIFANES POLY-URETHANE DD Yacht Varnish and POLY-URETHANE Primer (above the waterline), as well as EPIFANES EPOXY HB COAT.If recoating intervals are within 5 days, sanding is not necessary.Coverage: approx. 8 - 10 sqm/l.

€54.50 *
Details
EPIFANES BLACK BOTTOM Coating
EPIFANES BLACK BOTTOM Coating
A black protective coating based on bitumen for above and below the waterline.This modern version of the conventional bitumen paint adheres well to raw steel and wood surfaces as well as existing tar and bitumen layers and synthetic primers.It is easy to apply, offers great UV resistance, elasticity and protection against the interchangeable impacts of water and air.Yield: approx. 10 m.sq./l.Note: It is recommended to apply the first layer with 15-25% with EPIFANES 1K-Spraythinner and use a stiff brush to work the paint onto the surface.

From €32.90 *
Details
G4 Polyurethane Wood Primer G4
G4 Polyurethane Wood Primer G4
G4 Extra is a solvent-based, one-component polyurethane resin. It hardens by absorbing moisture from the air and the substrate. This creates a wear-resistant film. The coating has a yellowish-transparent color. G4 is the ideal primer for subsequent laminates with epoxy resins. As a wood sealer, G4 Extra is a particularly hard-wearing varnish for dark woods (e.g. mahogany). G8 Super offers improved UV protection.Coverage: approx. 100 ml/m² on non-absorbent and min. 200 ml/m² on absorbent substratesNote: Product contains hazardous chemicals in accordance with the REACH regulation. We recommend that it is only applied by professional users.Please observe the manufacturer's processing and safety instructions before using the product. These can be found on the product label and in the technical data sheet below under "Downloads & Information".

From €23.50 *
Details
YACHTCARE Antifouling Primer
YACHTCARE Antifouling Primer
An elastic, one component primer for the underwater coating of GRP, metal and wood.The metal particles in the primer generate a flake netting, which constitutes a robust protection against immersive moisture.The primer forms an underground for all commercially available hard and self polishing antifoulings, but not for antifoulings with copper particles, like for instance PTFE antifoulings.It can serve as barrier primer or as bonding agent when changing the antifouling approach.Yield: ca. 8 m²/l.

From €26.90 *
Details
YACHTCARE EPOXY primer
YACHTCARE EPOXY primer
All-purpose, economic two component epoxy primer for all boat building materials (except strong operating solid woods).With its excellent adhesive properties, impact resistance and diffusion density it is especially suited at the recommended strength of layers for Osmosis protection coating on GRP yachts and as anti corrosive coating for steel and aluminium. YACHTCARE EPOXY-PRIMER can be coated over by all antifoulings and paint systems.Yield: 8 m²/l

From €29.90 *
Details
SEAJET 015 underwater primer
SEAJET 015 underwater primer
SEAJET 015 UNDERWATER PRIMER is a quick-drying and corrosion protection single-part underwater primer with good water resistance and excellent bonding qualities on old coats of paint (except aluminium).Due to the special bonding agent it is also extremely well suited as adhesion agent and barrier primer on unknown and not compatible antifoulings.This is especially true for coats of paint on antifoulings containing TEFLON or PTFE. Colour: silver.Coverage: approx. 8.4 m.sq./l.

From €36.90 *
Details
Epoxy-Primer SEAJET 117 Multipurpose
Epoxy-Primer SEAJET 117 Multipurpose
Seajet 117 is a multi purpose high performance primer for anti fouling and two component topcoats. The product offers long term durability for fibreglass, steel and aluminium. It is suitable for all areas of the boat. Coverage rate: approx. 8,5 m²/l. Colour: white.

From €52.90 *
Details
HEMPEL UNDERWATER PRIMER aluminium vinyl primer
HEMPEL UNDERWATER PRIMER aluminium vinyl primer
Quick-drying, one-component vinyl primer of outstanding Water resistance and elasticity, as a primer for the underwater area on all boat building materials. Particularly good corrosion and abrasion protection due to aluminum flakes. Also as a tie coat between HEMPEL LIGHT PRIMER and a antifouling or between an old and a new antifouling (barrier primer). Thinning: HEMPEL THINNER 811. Coverage: approx. 8 m.sq./l. Use biocide products safely. Always read the label and product information before use. Product Safety: For this product the hazard pictograms and signal words shown above apply, as well as the following hazard statements: H226, H317, H336, H373, H412.

From €23.90 *
Details
HEMPEL LIGHT PRIMER
HEMPEL LIGHT PRIMER
HEMPEL LIGHT PRIMER is a high-quality two-part epoxy primer for below and above the waterline.It acts as a good protection against water penetration on rigid surfaces, to prevent and repair osmosis damage in GRP and as a rust-protectant on metals. It can also be used on plywood and hard woods.LIGHT PRIMER is a very good bonding agent for deck paint and antifouling.A high-quality two-part primer for above and below the waterline for boats of GRP, steel, wood and aluminum.According to german legislation the 5 litre bucket 2577-057 may only be sold to professional users. If this applies to you, please order here to your company adress. You may also buy this product personally in our showroom in Hamburg.Coverage: 5.2 m.sq./l when sprayed on, approx. 8 m.sq./l when rolled or brushed.Thinner: HEMPEL THINNER 845. 

From €24.90 *
Details
SIGMA VIKOTE 18 chlorinated rubber primer
SIGMA VIKOTE 18 chlorinated rubber primer
A proven underwater primer with good rust protection in the marine industry. This chlorinated rubber primer pigmented with aluminum is highly waterproof and elastic. It is suitable for steel, wood and GRP and can be painted over with most commercially available antifoulings. VIKOTE 18 is also suitable as a sealer between an old and a new antifouling coat.After thorough cleaning and sanding, old tar and bitumen coatings can also be painted over, but "bleeding through" must be expected.Coverage: approx. 8 m²/l. Color: light silver-grey.Thinner: Sigma Thinner 21-06.

From €79.90 *
Details
SIGMA PRIME 200 Epoxy-Primer
SIGMA PRIME 200 Epoxy-Primer
This very fast drying universal epoxy primer is "one for all": an exceptional robust and water-impermeable two component sealing for all boat building materials below as well as above the water line.SIGMA PRIME 200 has excellent corrosion protection characteristics as well as a high surface and temperature tolerance.It also adheres to only manually derusted and water blasted surfaces as well as on aluminium and galvanized areas.It can be covered with all maritime one and two component primers, paints and varnishes.For the antifouling below water a bonding agent (tiecoat) has to be used. For touch ups and smaller ships SIGMA VIKOTE 18 is used. For extensive coatings SIGMA COVER 555 (only available on request in 20 litre cans) is recommended.Tip: VIKOTE 18 can be painted directly onto SIGMAPRIME 200 without sanding if the surface is not yet fully cured, i.e. ‘tacky’. Otherwise it's necessary to sand the cured surface before coating.Coverage: approx. 11 m²/l. Thinner: 91-92.

From €139.00 *
Details
Penetrating epoxy zink coating HANSAZINC ST
Penetrating epoxy zink coating HANSAZINC ST
Two component epoxy primer containing zinc dust (67%) with a high penetrating capability also on steel surfaces, whitch are only hand cleaned of rust or water-blasted.Resulting in a well adherent and robust cathodic corrosion protection layer. HANSAZINC tolerates some residual moisture (not wetness) and a thin film rust formation.Can be overcoated with 2-K paints, as well as with tar, vinyl and chlorinated rubber primer, but not with paints based on alkyd resin and colors containing zinc phosphate. Colour: dark grey.Yield: 8-11 sqm/l.

€115.00 *
Details
Black varnish
Black varnish
Black, quick-drying petrol-resin solution (formerly tar paint) for use as a protective layer for ship hulls, pontoons and port facilities made from steel, wood and concrete.Also applicable below the waterline. Do not use in the interior!Can be diluted with turpentine. Yield: approx.8-10 m.sq./l.

From €18.90 *
Details
HEMPEL CONVERSION Primer
HEMPEL CONVERSION Primer
HEMPEL CONVERSION Primer is a two-component epoxy resin-based adhesion primer. It was developed to facilitate the change from conventional antifoulings to the biocide-free thin-film antifouling HEMPASPEED TF from HEMPEL. The primer can be applied to existing antifoulings (including International VC-17m) as well as to one- and two-component primers, provided the surface is intact and stable. Attention: The primer does NOT provide corrosion protection, but merely acts as an adhesion promoter.Coverage: approx. 15 m²/literSubstrate pre-treatment: New build: Prime uncoated surfaces with a corrosion protection primer beforehand. Two-component primers based on epoxy resin (e.g. HEMPEL Light Primer) are recommended.Existing antifouling (if load-bearing and intact): Sand the surface with wet sandpaper and water. Rinse the substrate. Clean and dry the surface.Application: Apply a full coat of HEMPEL Conversion Primer. Due to its low viscosity, the Conversion Primer is very thin, so any runners should be smoothed out as quickly as possible. The final coat (e.g. HEMPEL HEMPASPEED TF) can then be applied. Please refer to the technical data sheet for precise information on drying times and recoating intervals.

From €48.90 *
Details
LEFANT Epoxy primer
LEFANT Epoxy primer
LEFANT Epoxy Primer is specially designed for underwater use and can be applied to gelcoat, plastic, steel, aluminum, sterndrives and propellers.The two-component epoxy resin-based primer is suitable for pretreatment of antifoulings such as LEFANT T-Coat, it is oil and chemical resistant and protects against moisture penetration, preventing osmosis. Thanks to the long recoat intervals, it can be easily applied and cures even at low temperatures (min. 5 °C). Available in white or black.For detailed application instructions, please refer to the product data sheet. Application on painted substrates: Old one-component coatings and primers should be removed, two-component primers in good condition can be coarsely sanded (grit 60-80). Then clean thoroughly. If necessary, level uneven areas with epoxy filler.When recoating steel hulls, the surface should be sandblasted or coarsely sanded and painted with a diluted coat of epoxy primer (20-30% diluted with Lefant Multi thinner) immediately after sanding. Then apply up to three more coats and subsequently level out any unevenness and defects with putty.

From €52.00 *
Details