To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

EPIFANES POLY-URETHANE DD Clear Satin with UV Filter

2063-910 EPIFANES POLY-URETHANE DD Yachtlack Seidenglanz klar

EPIFANES POLY-URETHANE DD Clear Satin with UV Filter

€59.90*

Content: 0.7502

€59.90*

Content: 0.7502 Liter (€79.85* / 1 Liter)

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

packaging

750 ml can

Geb

A hard, UV-protecting two-component aliphatic urethane varnish with a satin finish . The varnish has excellent resistance against scratching, alcohol and other aggressive household chemicals. It is especially suited as a satin finish on EPIFANES POLY-URETHANE Clear Gloss With UV Filter, PP-VERNIS EXTRA varnish, epoxy resins and existing two-component satin varnishes. To be used on dimensionally stable wood like marine plywood.

Tip: For best results, apply the varnish with a nylon or short haired roller.

Thinner: EPIFANES POLY-URETHANE Brushthinner, EPIFANES POLY-URETHANE Spraythinner

Coverage: 12 m²/l

Mixing ration by weight: 2 part comp. A + 1 part comp. B

more information

📖 View article in the TOPLICHT catalogue

Art. No.	packaging	Price (pack)	Delivery time	Note list	Buy

Downloads

A hard, UV-protecting two-component aliphatic urethane varnish with a satin finish . The varnish has excellent resistance against scratching, alcohol and other aggressive household chemicals. It is especially suited as a satin finish on EPIFANES POLY-URETHANE Clear Gloss With UV Filter, PP-VERNIS EXTRA varnish, epoxy resins and existing two-component satin varnishes. To be used on dimensionally stable wood like marine plywood.

Tip: For best results, apply the varnish with a nylon or short haired roller.

Thinner: EPIFANES POLY-URETHANE Brushthinner, EPIFANES POLY-URETHANE Spraythinner

Coverage: 12 m²/l

Mixing ration by weight: 2 part comp. A + 1 part comp. B

Legal information about the product

CLP Regulation
Symbols
Signalword	Attention!
H phrases	H226, H317, H332, H335, H336, H412, EUH066
P phrases	P102, P210, P233, P260, P271, P280, P301+P310, P303+P361+P353, P501

Questions about the product?

Similar products

EPIFANES POLY-URETHANE Brushthinner

EPIFANES POLY-URETHANE Brushthinner

A slow evaporating thinner for brushing and rolling EPIFANES POLY-URETHANE Yacht coatings. Also suited as slow evaporating thinner for EPIFANES PP Varnish Extra.

From €19.90 *

Last seen products

More articles from this category

EPIFANES Rubbed Effect Varnish

EPIFANES Rubbed Effect Varnish

A one-component polyurethan alkyd resin-based clear coat that is quick drying and has a satin gloss. It protects surfaces against alcohol and other aggressive household chemicals. To be used as a finishing coat over several build up high gloss coats (e.g. EPIFANES Clear Gloss Varnish , EPIFANES Woodfinish Gloss or EPIFANES Rapidclear) on all wood types or as a maintenance coating for intact existing interior satin varnishes (one- and two-component). Suitable for interior application only.Suitable Thinner: EPIFANES Brush Thinner for Paint and VarnishCoverage: approx. 13 m.sq./l.

From €24.90 *

EPIFANES AQUA MARINE Satin Varnish

EPIFANES AQUA MARINE Satin Varnish

A fast-drying, low-solvent and one-component satin-gloss varnish made of a water-based polyurethan acrylate dispersion. Suited for final coating in interior applications.Because of the low VOC-level, this varnish has no odor. It has excellent flow ability and is restistant against abrasion, houshold chemicals and alcohol.It can be applied on existing, intact one- and two-component varnishes or as a semi-gloss finish on several build-up coats of a clear varnish system like EPIFANES Clear Varnish or EPIFANES Woodfinish Gloss. The varnish comes out of the can milky, but clears crystal clear when dried.Suitable thinner: waterYield: approx. 12 m²/l.

€45.50 *

EPIFANES RAPIDCOAT rapid satin varnish

EPIFANES RAPIDCOAT rapid satin varnish

Fast-drying, silk matt varnish with good weather resistance and UV protection.Adheres well to teak and other oily woods and protects against discoloration due to its brownish pigmentation.On weathered surfaces, EPIFANES Rapidcoat can restore a uniform appearance.Suitable for filling and priming wood in preparation for e.g. EPIFANES Clear Varnish or EPIFANES Woodfinish-Gloss. Can also be used for overcoating existing one-component clearcoats and can also be overcoated with all one-component lacquers. Use indoors and outdoors above the waterline.Thinner: EPIFANES Brush Thinner for Paint and VarnishYield approx. 13m²/l.

€32.90 *

EPIFANES RAPIDCLEAR wood protection

EPIFANES RAPIDCLEAR wood protection

A one-component varnish that provides optimal protection in all climate conditions. EPIFANES Rapidclear gives a high-quality satin finish for long-term protection and care of all maritime woods, both inside and outside above the waterline.The paint is based on a modified alkyd-urethane resin. It adheres extremely well to teak and other oily woods, is very water-repellent, very breathable and flexible. It provides a lightly pigmented UV-protection finish, protects against discoloration and supports the natural wood grain. On weathered surfaces, RAPIDCLEAR can restore a uniform appearance. With its quick drying, grain filling properties, it is suitable for fast and easy build-up of varnish without sanding needed between layers. This makes it a great base coating for the final application with EPIFANES Clear Gloss Varnish or EPIFANES Woodfinish Gloss. Can be applied on existing one- and two-component varnishes as well. EPIFANES Rapidclear is for those who want the best in a quick and easy satin finish system with maximum UV resistance and durability.Suitable Thinner: EPIFANES Brush Thinner for Paint and Varnish, EPIFANES 1-K spray thinner Coverage: ca. 13m²/l

€32.90 *

EPIFANES POLY-URETHANE DD Clear Gloss With UV Filter

EPIFANES POLY-URETHANE DD Clear Gloss With UV Filter

Extremely hard, high-gloss 2-component clear coat with UV filter.It offers particularly good scratch, impact and abrasion resistance. Due to it's great weather resistance, the high-gloss finish is retained for a long time even in sun and salt water. Has very good flow properties and allows easy application by roller, brush or spray gun.Suitable for interior and exterior use, on plywood and non-"working" hardwoods, and as a UV-protective finish on epoxy coatings.Cannot be used on 1-component paint systems.Thinner: EPIFANES POLY-URETHANE Brush Thinner, EPIFANES POLY-URETHANE Spray ThinnerYield: 12 m²/l.

From €59.90 *

EPIFANES POLY-URETHANE DD Clear Satin with UV Filter

EPIFANES POLY-URETHANE DD Clear Satin with UV Filter

A hard, UV-protecting two-component aliphatic urethane varnish with a satin finish . The varnish has excellent resistance against scratching, alcohol and other aggressive household chemicals. It is especially suited as a satin finish on EPIFANES POLY-URETHANE Clear Gloss With UV Filter, PP-VERNIS EXTRA varnish, epoxy resins and existing two-component satin varnishes. To be used on dimensionally stable wood like marine plywood.Tip: For best results, apply the varnish with a nylon or short haired roller.Thinner: EPIFANES POLY-URETHANE Brushthinner, EPIFANES POLY-URETHANE SpraythinnerCoverage: 12 m²/lMixing ration by weight: 2 part comp. A + 1 part comp. B

€59.90 *

EPIFANES PP-Varnish Extra with UV Filter

EPIFANES PP-Varnish Extra with UV Filter

High-gloss, good filling, elastic 2-part clear varnish for interior and exterior surfaces.Abrasion-resistant and quick-drying (3 coats per day are possible).Primer for massive- and plywood.Good insulating varnish for oily woods (for example, teak). Best adherence on epoxied surfaces.For UV protection outside, it must be covered with 1-part clear varnish or 2-part polyurethane (DD) varnish.Coverage: approx. 14 m.sq./l.

From €129.90 *

HEMPEL CLASSIC VARNISH

HEMPEL CLASSIC VARNISH

A traditional 1-part clear varnish in an alkyd base.The varnish contains tung oil, which ensures a flexible finish.Provides an excellent deep gloss finish and has good resistance to salt water, UV rays and weathering.Particularly well suited to wooden masts and wooden boat pieces that are exposed to similar conditions. Coverage: approx. 18 m.sq./l.

From €22.90 *

VOSSCHEMIE G8 SUPER Polyurethane Clear Coat

VOSSCHEMIE G8 SUPER Polyurethane Clear Coat

Note: Product contains hazardous chemicals according to the REACH regulation. We recommend processing only byprofessional users.Please observe the manufacturer's processing and safety instructions before using the product. These can be found on the product label and in the technical data sheet below under "Downloads & Information". G8 SUPER is a non-yellowing, solvent-based, one-component polyurethane lacquer. It hardens after the release of the solvent under the influence of air humidity and achieves very good resistance to common chemicals. The material should not be used in living areas.

€55.90 *

INTERNATIONAL ORIGINAL clear varnish

INTERNATIONAL ORIGINAL clear varnish

Traditional (formerly BLUE PETER), general purpose gloss varnish. Single-component clear varnish with high UV resistance and very good flow properties. High clarity finish for light colour woods. Spreading rate: approx. 12 m²/l.High quality varnish by INTERNATIONAL, the worldwide leading manufacturer of marine paints, that is now part of AKZO NOBEL and has an experience in the manufacture of ship paints of more than 150 years.

€24.95 *

INTERNATIONAL COMPASS clear varnish

INTERNATIONAL COMPASS clear varnish

Single-part high gloss clear polyurethane varnish, with high UV-resistance and very good flow characteristics.Quick drying, with good strength and wear-resistance. Light amber colour. High quality varnish by INTERNATIONAL, the worldwide leading manufacturer of marine paints, that is now part of AKZO NOBEL and has an experience in the manufacture of ship paints of more than 150 years. Practical Coverage 14 m²/l.

€29.95 *

INTERNATIONAL varnish SCHOONER

INTERNATIONAL varnish SCHOONER

Traditional amber coloured one-part varnish on the basis of tung oil with excellent UV protection.Exceptional deep gloss and colour especially on oleaginous woods like teak or iroko. Yield: 14m²/l. High quality varnish by INTERNATIONAL, the worldwide leading manufacturer of marine paints, that is now part of AKZO NOBEL and has an experience in the manufacture of ship paints of more than 150 years.Practical Coverage 13 m²/l.

€29.95 *

HEMPEL DURA-GLOSS-VARNISH

HEMPEL DURA-GLOSS-VARNISH

A fast-drying, one-component clear varnish based on urethane alkyd resin with UV absorbers and a good balance between hardness and flexibility. The varnish is scratch resistant and has an improved durability due to its optimized mixture of UV filters. DURA-GLOSS is suitable as a high gloss finish and can be used on new and already varnished wood indoors and outdoors above the waterline.Suitable thinner: HEMPEL Thinner No. 811Theoretical coverage: approx. 19 m²/l.Note: Please follow the application instructions in the technical data sheet before and during application of the product.

€21.90 *

BIO PIN natural clear varnish

BIO PIN natural clear varnish

High-gloss and wear-proof traditional varnish with excellent flow. Boiled from natural wood oil (tung oil) and rosin (hard spruce), possesses a very high solids content, which makes it exceptionally UV-, salt water- and weather-proof. BIO PIN oil is recommended as a base.Coverage approx. 12 m.sq./l.

From €19.90 *

LACQ Natural Clear Varnish

LACQ Natural Clear Varnish

The LACQ yacht varnish is produced by the Dutch company Vliegenthart using traditional methods and consists mainly of Chinese wood oils and phenolic resins. Although this means that it dries longer than many synthetic varnishes, it also has a better durability. The high-gloss surface remains elastic after drying and is extremely robust and weatherproof. The varnish also contains a UV filter that offers maximum protection against sunlight, even in tropical climates.Suitable for use on raw and unvarnished wood (e.g. mahogany, meranti, Oregon pine), as well as plywood inside and outside above the waterline. Can also be used to maintain existing, intact one- and two-component lacquer systems. Can be applied with a brush or spray gun.Contents: 1lCoverage: 14 m²/l. Thinner: Turpentine (brush application), petrol (spray application)For detailed application instructions, please refer to the technical data sheet under "Downloads & Information".

€35.50 *

LE TONKINOIS parquet varnish

LE TONKINOIS parquet varnish

VERNIS PARQUET:Linseed oil boiled with wood oils and alkyd resins to raise its strength and hardness.Quick-drying and heavy-duty, without solvents, satin gloss.Well suited for wood and parquet flooring.Coverage: approx. 20 m.sq./l.

From €37.90 *

RYLARD VG66 Premium classic high gloss varnish

RYLARD VG66 Premium classic high gloss varnish

This elastic yet very robust clear varnish for wooden boats is equipped with UV filters and promises a long-lasting high gloss.It is formulated from linseed oil and tung oil and refined with additional resins. It therefore dries faster than the traditional clear varnish VG63 and can also be applied well in northern European regions.Coverage: approx. 18 m²/lRYLARD varnischThe Italian ship and yacht paint manufacturer BRAVA from Genoa, offers a range of traditional yacht paints with its RYLAR brand, the original formula of which was developed for yachting in the 19th century and is known as "Yachtman's Mirror" on many classic yachts.

€29.90 *

EPIFANES POLY-URETHANE Varnish KARAT MAHAGONI

EPIFANES POLY-URETHANE Varnish KARAT MAHAGONI

POLY-URETHANE KARAT Mahogany Varnish from EPIFANES is a hard, UV-protective 2-component clear varnish for interior and exterior use. It has excellent scratch, impact and abrasion resistance.Due to the reddish pigmentation, the Karat Mahogany variant is particularly suitable for tinting in an existing 2-component clearcoat system or for pigmented new construction on raw wood.The application is the same as for the other POLY-URETHANE coatings from EPIFANES. Yield: 12 m²/l.

Content: 0.7502 Liter (€0.00* / 1 Liter)

€80.50 *

RYLARD VG63 Traditional Clear Varnish

RYLARD VG63 Traditional Clear Varnish

Clear yacht varnish, very elastic and deep penetrating, does not flake off. Boiled from linseed oil and tung oil according to a traditional recipe. However, unlike synthetic resin varnishes, it dries very slowly, which gives it the elasticity and durability required for solid wood boats. Should not be applied below 15°C.Coverage: approx. 20 m²/l.RYLARD varnischThe Italian ship and yacht paint manufacturer BRAVA from Genoa, offers a range of traditional yacht paints with its RYLAR brand, the original formula of which was developed for yachting in the 19th century and is known as "Yachtman's Mirror" on many classic yachts.

€36.90 *

SIGMA VARNISH YACHT GLOSS Clear Varnish

SIGMA VARNISH YACHT GLOSS Clear Varnish

Clear, high-gloss varnish.Seawater-proof, weather- and UV-resistant, high filling capacity, good scratch and wear resistance.Classic manufacture based in wood oil/phenol resin.Yield: approx. 16 m.sq./l.Thinner: 20-05.SIGMA VARNISH YACHT GLOSS is replacing the former SIGMARINE 42 varnish.

€29.90 *

Request sent successfully

Request wasn't send - a error occured. Please try again.