Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Boric wood impregnation BORACOL

€0.00*

The wood preservative BORACOL is not available for an indefinite period.

Boron salt-based wood preservative to combat and prevent mould, blue stain and bacteria in damp wood below deck, as well as algae, moss and mildew stains on the wooden deck.

Ready-to-use water-based solution, without outgassing organic solvents, therefore also suitable for indoor use.

This biocidal product should be used with care. Always read the label and product information before use. BAuA No. N-74326


more information
Show articles


Downloads

The wood preservative BORACOL is not available for an indefinite period.

Boron salt-based wood preservative to combat and prevent mould, blue stain and bacteria in damp wood below deck, as well as algae, moss and mildew stains on the wooden deck.

Ready-to-use water-based solution, without outgassing organic solvents, therefore also suitable for indoor use.

This biocidal product should be used with care. Always read the label and product information before use. BAuA No. N-74326


Biocidal Product: Important Purchase Information

Before selling a biocide-containing antifouling to a private individual with a German delivery address, we are required to conduct a one-time telephone consultation. Commercial customers and customers outside Germany are exempt from this requirement.

If you want to purchase a biocide-containing antifouling

  • you must be logged in as a customer
  • Add the product to your cart and proceed to checkout
  • After placing your order, you will receive an information email with all relevant details
  • To conduct the consultation, call Mon-Fri, between 9:00 AM and 6:00 PM at +49 40 88901080. The call takes approximately 5 minutes.

For more information on biocide-containing products, click here.

Legal information about the product
CLP Regulation
Symbols ghs07 ghs08
Signalword Attention!
H phrases H315, H319, H373, H412
BAuA-Registriernummer N-84571
Classified according to Biocidal Regulation (Regulation 528/2012/EU): Use biocidal products with care. Always read label and product information before use.

Questions about the product?

Last seen products

More articles from this category

EPIFANES EASY-FLOW Paint Conditioner
EPIFANES EASY-FLOW Paint Conditioner
EPIFANES EASY FLOW penetrating oil is a multi-purpose additive made of natural oils to improve the impregnating ability of one-component primers or undercoats.This product can be added to all conventional and semi-synthetic paints, even under difficult conditions, a favorable result is achieved. By adding 5-10% to the paint, visible brush strokes are avoided, thus creating a closed and smooth surface. Can also be used as an impregnating oil for wood and as a preservative oil for rusted steel surfaces freed from loose rust.This product can be reworked with conventional paints.

From €17.90 *
Details
IMP fungicidal impregnating oil
IMP fungicidal impregnating oil
Current delivery information: IMP is back in stock!IMP Impregnating Oil is a transparent wood impregnation made from a drying alkyd resin oil. Due to its excellent penetration properties, it has a preventive effect against rot and fungal infestation when the wood is impregnated because air and moisture are displaced. Dries in a short time, is water vapor permeable and water repellent. Suitable as a saturating primer for further coatings such as BENAR oils and other single-component coatings. For the sole treatment (matt surface) for spars and masts, we recommend applying "wet on wet" until the wood is completely saturated. Suitable for all types of wood.Application: The product is ready to use and should not be diluted. Stir well before use. The product can be applied with a brush or roller. Clean tools with turpentine substitute. Yield: approx. 3-6m2/l.

From €37.90 *
Details
OWATROL MARINE D1 penetrating oil
OWATROL MARINE D1 penetrating oil
Deep impregnation sealant for all types of wood, made with fungicide. Natural for sealing and soaking wood and decks. Permeates the wood and displaces moisture from its pores.For underwater surfaces, it must be covered with an primer.If used alone, a durable, breathable, silk-matte surface will be achieved.Should be covered with a finishing coat, OWATROL DEKS OLJE D2 or EDELOLJE. Yield at first use: 250-1000 ml/m.sq., maintenance treatment: ca.100 ml/m.sq..

From €29.90 *
Details
OWATROL DEKS OLJE D2
OWATROL DEKS OLJE D2
Natural oil for final gloss coating of wood impregnated with OWATROL DEKS OLJE D1 as a gloss finish.Use only in above-water applications.Builds a breathable, elastic coat that withstands cracks and delamination extremely well. Requirements: approx. 15 m.sq./l.

From €33.90 *
Details
OWATROL oil aerosol can
OWATROL oil aerosol can
Based purely on natural oils, OWATROL oil, with its exceptional penetration capabilities, is the basic product for many applications.It is three times as wet as water, that is to say, it even creeps upwards. On rusty metal it creeps deep into the rust pores and displaces air and moisture (thus the real causes for rust) from inaccessible areas. After drying (24 hours at 20°C), it is on the one hand easier to remove the leaf rust, and on the other will the saturated final rust be sealed, conserved and preserved and can be painted over with paints that are turpentine soluble (not applicable for parts, that are constantly covered by water).Additionally OWATROL oil lends itself to be the perfect additive for one component paints. Used instead of turpentine as a thinner it improves the coating and flow properties substantially and provides an optimal adhesion without diluting the quality of the paint. On the contrary, by adding 10-15 % OWATROL oil, paints and varnishes will be even more closed porous and long-lasting in the surface.Also usable as a toxin-free wood impregnation.Spray can for quick protection of small surfaces.

€19.90 *
Details
OWATROL oil paint conditioner
OWATROL oil paint conditioner
Based purely on natural oils, OWATROL oil, with its exceptional penetration capabilities, is the basic product for many applications.It is three times as wet as water, that is to say, it even creeps upwards. On rusty metal it creeps deep into the rust pores and displaces air and moisture (thus the real causes for rust) from inaccessible areas. After drying (24 hours at 20°C), it is on the one hand easier to remove the leaf rust, and on the other will the saturated final rust be sealed, conserved and preserved and can be painted over with paints that are turpentine soluble (not applicable for parts, that are constantly covered by water).Additionally OWATROL oil lends itself to be the perfect additive for one component paints. Used instead of turpentine as a thinner it improves the coating and flow properties substantially and provides an optimal adhesion without diluting the quality of the paint. On the contrary, by adding 10-15 % OWATROL oil, paints and varnishes will be even more closed porous and long-lasting in the surface.Also usable as a toxin-free wood impregnation. For small touch ups it is also available in a spray can.

From €13.90 *
Details
OMNISIDE INNOPERL W Impregnation
OMNISIDE INNOPERL W Impregnation
Surface impregnation for many absorbent surfaces such as sails, tarpaulins or boat cushions, as well as transparent protection for natural stone and wood surfaces. The product is not applied, but is absorbed into the surface, is invisible and does not change the color of the treated surfaces.  Has strong water, oil and dirt repellent properties (hydrophobic and oleophobic).Solvent and silicone-free, making it safe to use indoors.Can be applied with a brush, fur roller, cloth or pressure pump sprayer (see technical data sheet under "Downloads & Information").Coverage: approx. 10 m²/l Dilution: Can be diluted up to 1:2 with water.

From €31.00 *
Details
Wood impregnation OWATROL AQUADECKS
Wood impregnation OWATROL AQUADECKS
Newly developed product: deeply immersive, water based wood impregnation for all woods in the interior and the outside, especially qualified for teak decks.The quick drying impregnation protects the wood long term from greying (2 years) and is applied directly to the new wood or already weathered, but cleaned wood, without developing a film on the surface.The teak coloured pigmentation enables the UV protection.

€149.00 *
Details
BIO PIN Holzwurmfrei
BIO PIN Holzwurmfrei
Preventive, open-pored wood preservative against fungal decay and insect attacks of timber in the interior and outdoors as well as wood in humidors.Also suited for the restoration (solidification) of old timberPermeable for water vapour .Effective by obfuscation of the wood for vermin. Rubber gloves should be carried when applying.A recognised respiratory equipment should be carried when using a spray diffuser.Do not sand with steel wool, since the sanding dust can lead to black staining. The biopin Vertriebs GmbH produces innovative natural paints already in the fourth generation with the technical facilities of the present. The company manufactures wholesome products on the basis of natural raw materials.

€23.00 *
Details
LE TONKINOIS impregnating oil
LE TONKINOIS impregnating oil
HUILES BIO IMPRESSION: Colorless impregnation oil for wood.Made from pure natural oils (linseed oil, castor oil, palm oil).Free of pollutants and solvents. Quick-drying, durable, heavy-duty.Coverage: approx. 25 m.sq./l.

From €19.90 *
Details
RYLARD IMPREGNATE Wood Impregnation Oil
RYLARD IMPREGNATE Wood Impregnation Oil
Deep penetrating priming oil for untreated wood. Forms a long-lasting barrier in the wood and also serves as an ideal base for varnishing with RYLARD clear coats. Suitable for all types of wood. Yield 15-20 m²/l.RYLARD varnischThe Italian ship and yacht paint manufacturer BRAVA from Genoa, offers a range of traditional yacht paints with its RYLAR brand, the original formula of which was developed for yachting in the 19th century and is known as "Yachtman's Mirror" on many classic yachts.

€21.60 *
Details
HEMPEL WOOD IMPREG Impregnating Oil
HEMPEL WOOD IMPREG Impregnating Oil
Clear alkyd oil for impregnating raw wood to saturate it before applying varnish. Also suitable for the treatment of hardwoods, both indoors and outdoors above the waterline.Application: Before applying to untreated wood, ensure that the surface is dry and clean (wood moisture content should be below 16%). Remove dust and loose material from surfaces that have already been treated. Stir the container well and apply 2-4 coats wet on wet with a brush until the wood is saturated and no more oil is absorbed. Allow the oil to soak in, then wipe off excess oil with a lint-free cloth to prevent a film from forming. After drying, the surface can be further treated with the appropriate varnish or paint.Theoretical coverage: 13 m²/l (depending on surface roughness, porosity of the substrate and application method)Thinner: HEMPEL Thinner 811 (max. 20%)

€22.90 *
Details