Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Chipping hammer with tip

2131-001 Rosthammer mit Spitze
2131*02 Rosthammer mit Spitze

€31.50*

€31.50*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

L (mm)
H (mm)
B (mm)
weight (g)
Stk

Classic chipping hammer for manual derusting. With point and chisel. With its point, the pickhammer is particularly suitable for chipping heavy rust in corners, for a complete removal of deeply ingrained severe rusting and for cleaning weld seams.

With polished ash handle.

Show article
📖 View article in the TOPLICHT catalogue


Classic chipping hammer for manual derusting. With point and chisel. With its point, the pickhammer is particularly suitable for chipping heavy rust in corners, for a complete removal of deeply ingrained severe rusting and for cleaning weld seams.

With polished ash handle.

Questions about the product?

Last seen products

More articles from this category

Chipping hammer
Chipping hammer
Classic chipping hammer with the two ends of the head rotated 90í from each other. Ideal for chipping rust on steel hulls or chains.With polished ash handle.Weight: 500 g.

€33.90 *
Details
Ship scraper / piercer
Ship scraper / piercer
Ship scraper with long handle, ideal for scraping paint. High-quality tool made from tempered, hardened tool-grade steel with asharpened edge and sturdy wooden handle. The rust scraper blade with flat edge as well ashandles in three lengths are also available separately.

From €8.20 *
Details
Ship scraper
Ship scraper
High-quality tool made from tempered, hardened tool-grade steel, with sharpened edge. The scraper comes mounted. The blade (2157-080) with handle (D=35 mm) with 2 clamps is intended for use as a mallet.

From €10.90 *
Details
Metal scraper disk TERCOO
Metal scraper disk TERCOO
TERCOO is a rotating disk for the removal of rust, paint, tar, epoxy, paint, adhesives etc. from various materials such as steel, iron or other metals.The rubber disks may be attached to a standard drill and allow rust or paint removal, as thoroughly as sandblasting.The result is a sandblasted surface with the appropriate texture suitable for the application of a new protective coating.TERCOO provides the correct surface preparation for proper adhesion of new protective coatings.With revs of 1500 - max. 4000 RPM up to 6 sq.m. can be worked with a single disk in one hour. Available designs:Metal (brown): single disk, one pin row. Metal (brown): double disk, two pin rows. Metal (brown): triple disk, three pin rows.

From €41.95 *
Details
FEIN polisher WPO14-25E with 8-fold steel blaster
FEIN polisher WPO14-25E with 8-fold steel blaster
The very powerful FEIN WPO14-25E angle polisher in a set with a TERCOO 8-fold blast wheel is the ideal "team" for large-scale rust removal work.The professional angle polisher is characterized in particular by the following features: speed control with high speed consistency thanks to a particularly powerful gearbox and a high-performance motor, a symmetrical housing with excellent ergonomics for right and left-handed operation, restart interlock and soft start.The 8-fold TERCOO blasting disc, with a special hexagonal holder, is designed for tough use and removes rust, tar and old paint. Supplied with special holder for handle mounting and protective plate in a system case.The TERCOO MULTI replacement discs are available in four versions:Article 2178-008 as a complete set with 8 blasting discs and a special shaft suitable for the FEIN angle polisherArticle 2178-009 as a set of 2 without shaft, for replacing individual discs (5°/15°).Article 2178-011 single disk 5°Article 2178-012 single disk 15°

From €39.90 *
Details
TERCOO suction device
TERCOO suction device
Suction device compatible with the TERCOO metal scraper disks. Minimises the rust, dust and paint particles produced from grinding and is recommended in addition to a face mask when working on or under the ship. Fits Hoovers with a hose diameter of 25mm. In combination with the TERCOO guiding rail with spacer the work - for instance below the waterline - is definitely made easier.

€105.51 *
Details
TERCOO guiding rail with spacer
TERCOO guiding rail with spacer
The TERCOO guiding rail with spacer makes the work with TERCOO scraper disk a great deal easier. The distance to the work part is adjusted by an adjusting screw, enabling one to work with little effort. The large handle adds additional strong grip. In combination with the TERCOO suction device the work - for instance below the waterline - is definitely made easier.

€129.00 *
Details
Needle Scaler VON ARX
Needle Scaler VON ARX
Compressed air needle gun made by VON ARX, equipped with 12 needles of 3 mm diameter each. Professional tool for effective substrate preparation of steel constructions. Can also be used on uneven surfaces, corners, edges or weld seams. Fast hammering of the needles makes thick layers of paint, rust or scale flake off. The narrow, handy design of the needle gun also makes it possible to work on hard-to-reach places on board, for example the bilge area.The needle gun is connected to a compressed air supply and guided against the surface with light pressure so that the needles can work unhindered. Operating pressure: 6 bar.Air consumption: 96 l/min.Connection: 3/8".Weight: 1,3 kg.Comes in a black plastic case.

€439.00 *
Details
Chipping hammer with tip
Chipping hammer with tip
Classic chipping hammer for manual derusting. With point and chisel. With its point, the pickhammer is particularly suitable for chipping heavy rust in corners, for a complete removal of deeply ingrained severe rusting and for cleaning weld seams.With polished ash handle.

€31.50 *
Details