To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Reefing hook TDS

2156-010 Ausfughaken / Fugenkratzer TDS

2156-010 Ausfughaken / Fugenkratzer TDS

Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.

Reefing hook TDS

€54.90*

€54.90*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

length (mm)

215

Stk

Professional tool by TeakDeckingSystem (TDS) to remove old deck caulking or marine sealant from deck seams. A hook scraper, where the flanks can be sharpened and whose lower 3,5 mm wide edge can remove the material from the bottom of the seam.
Equipped with a rubberised, ergonomic handle.

more information

📖 View article in the TOPLICHT catalogue

Art. No.	length (mm)	Price (unit)	Delivery time	Note list	Buy

Downloads

Professional tool by TeakDeckingSystem (TDS) to remove old deck caulking or marine sealant from deck seams. A hook scraper, where the flanks can be sharpened and whose lower 3,5 mm wide edge can remove the material from the bottom of the seam.
Equipped with a rubberised, ergonomic handle.

Questions about the product?

Similar products

TDS Marine Deck Caulkling Sealant

TDS Marine Deck Caulkling Sealant

TEACKDECKING SYSTEMS deck caulk SIS440 was developed by professional teak deck installers over 30 years ago. The 1-component, air-moisture hardening silane-based deck joint compound is very well suited for deck joints of 3-10 mm width.The TEAKDECKING SYSTEMS deck caulk runs very well during application and does not shrink during hardening. When hardened, it is easy to sand, extremely flexible and highly resistant to UV light. A primer is not recommended for teak deck caulking. However, the joints must be well sanded and cleaned with acetone. An inlay masking tape is recommended to prevent 3-flank adhesion.Properties:Color: black,Film forming time: 20 - 40 minutes,Elongation at break: 850 %,Shore A hardness: 38-40°,Tensile Strength: 2.0 mm².Please observe the processing instructions on the data sheets.Important! When using the cartridge, first cut the tip at an angle. Then insert a suitable pointed object (e.g. a nail or screwdriver) into the spout and pierce the foil seal generously.

From €27.50 *

TDS deck joint applicator

TDS deck joint applicator

Practical applicator developed by teak deck specialists TDS for the precise filling of deck joints. The caulking aid can be screwed onto standard cartridge nozzles using a self-tapping plastic internal thread. Approx. 10-15 mm of the tip of the cartridge nozzle must be cut off beforehand. The skid-shaped nozzle on the wide underside is inserted into the joint and enables more controlled guidance when applying the joint sealant, saves material and limits the amount of sanding required later. Thanks to its rounded tip, the applicator enables a perfectly rounded joint. With sealing cap. After use, the applicator should be cleaned with a cloth and acetone and then closed with its cap.The white cartridge spout shown is not included. Available for 4, 5 and 6 mm joints. The corresponding width is labelled on the adapter.

From €19.90 *

TDS deck fix (100pcs)

TDS deck fix (100pcs)

Professional deck fix for the installation of bar decks, developed by teak deck specialists TDS. Simplifies the uniform adjustment of the joint width. The spacers have a drilled hole and can be fixed directly in the joint with a wood screw (not included) to prevent slipping.Available in packs of 100, each for 4, 5 and 6 mm joints.

From €59.90 *

MAXI-scraper

Inexpensive aluminum scraper with grippy soft handle and extra manual knob. Length, 290 mm. Weight, 260 g. Blade of hardened tool-grade steel, 65 mm wide.

From €17.90 *

Seam scraper

Seam scraper with stainless steel blade and plastic handle.Broad blade for scraping a plain surface. The pointed blade is a perfect tool for scraping of deck seams.

€12.50 *

Seam scraper

Ergonomic shaped scraper for the scraping and cleaning of grooves. The doubled blade is equipped with a roughened surface and can be employed either single (for narrow grooves) or double (for wide grooves). Spare blades (3 pieces per set) are available.

From €12.50 *

Seam sander TDS

Seam sander TDS

Patented professional hand tool with which the lateral flanks of deck joints can be sanded quickly and effectively or, in the case of a restoration, the remnants of old joint compound are sanded off to create a clean new adhesive surface in the joint. The teak handle glides gently over the deck and the height-adjustable guide plate ensures that the self-adhesive sandpaper strip has even pressure and that sanding is done exactly at a 90° angle. Supplied complete with 15 strips of sandpaper (60 grit).

From €49.00 *

TESA seam covering tape

TESA seam covering tape

Special tape for attaching to the surface of the seam bottom to hinder three-edge adhesion. Rolls of 50 m.

From €5.70 *

Acetone

Cleans tools, paint brushes and other working material. Effective for metal cleaning, epoxies, polyester resin and fiberglass. Can be used as thinner for many products. Degreases sanded surfaces.

€8.90 *

Last seen products

More articles from this category

Grindstone

Combination stone of electro-corundum. Highest quality for water or oil. One side rough, one fine.

€15.90 *

Double end scraper

Double end scraper

Made from tool-grade steel. Hardened cutting edge (50 HRC), sharpened. Cutting edge, 75 mm, length 270 mm, height 65 mm.

€14.95 *

Boat and molding scraper

Boat and molding scraper

With hardened and sharpened triangular edge, galvanized steel with beechwood handle.Entire length 270 mm.

From €15.90 *

Blades for boat and molding scraper

Blades for boat and molding scraper

Hardened and sharpened blades, galvanized steel.

From €10.50 *

Scraper KUNZ

Side scraper, with cast-iron handle, painted green.Tool-grade-steel blade 60 x 60 mm, hardened and ground on both sides. Can be resharpened easily.A practical tool that fits well in the hand and can be used by right- or left-handers.Dimensions:Length 310 mm, blade 60 x 60 mm, weight 530g.

€51.90 *

Spare blade

Spare blade for scraper KUNZ.

€23.90 *

blades for scraper BAHCO 625 MINI

blades for scraper BAHCO 625 MINI

Spare blades for BAHCO scraper 625 MINI.Made of COROMANT steel.Different shapes are available and may suit for complicated applications: - triangle blade (25mm) with three sharp edges, - round blade, - teardrop shaped blade with very sharp edge, - pear shape blade with roundish edge (to scrape rounded grooves).

From €22.80 *

BAHCO scraper ERGO MINI 625

BAHCO scraper ERGO MINI 625

Very slim scraper with soft ergonomically shaped handle and thin tool edge.Delivery with exchangable, reversible, convex sharpened blades of COROMANT carbide steel.Comes with plastic sheath.

€40.90 *

BAHCO scraper ERGO UNIVERSAL 650

BAHCO scraper ERGO UNIVERSAL 650

Scraper with soft ergonomically shaped handle and middle sized tool edge. Exchangable, reversible, convex sharpened blades of COROMANT carbide steel.

From €23.90 *

BAHCO scraper ERGO MAXI 665 doublehand

BAHCO scraper ERGO MAXI 665 doublehand

Strong scraper with soft ergonomically shaped handle and broad tool edge.For doublehand use. Exchangable, reversible, convex sharpened blades of COROMANT carbide steel.

From €56.90 *

Scraper

Scraper with unpainted wooden handle. The blade of hardened tool steel is riveted tightly, and carefully, slightly curved sharpened.

From €10.90 *

Twin scraper AMERIKA

Twin scraper AMERIKA

Handy scraper with wooden varnished handle available in 3 different sizes.Length of handle: 190mm.Each scraper is equipped with 2 exchangable blades, so that you carry a spare scraper always with you.

From €8.65 *

Gooseneck scraper

Gooseneck scraper

Scraper from tool steel, hardened.

€5.50 *

Scraper

Scraper from tool steel, hardened.

From €3.90 *

Scraper sharpener

Scraper sharpener

Steel sharpener, three-sided with wooden handle. For removing burrs from scrapers.

€29.90 *

Vacuum scraper

High quality scraper with carbide edge and vacuum attachment. For dust-free, environmentally friendly removal of bottom paint, etc. Available with double-sided blades and adapter for vacuum hose. Length 240 mm. Spare blades come in pairs.

From €45.50 *

MAXI-scraper

Inexpensive aluminum scraper with grippy soft handle and extra manual knob. Length, 290 mm. Weight, 260 g. Blade of hardened tool-grade steel, 65 mm wide.

From €17.90 *

Seam scraper

Seam scraper with stainless steel blade and plastic handle.Broad blade for scraping a plain surface. The pointed blade is a perfect tool for scraping of deck seams.

€12.50 *

Seam scraper

Ergonomic shaped scraper for the scraping and cleaning of grooves. The doubled blade is equipped with a roughened surface and can be employed either single (for narrow grooves) or double (for wide grooves). Spare blades (3 pieces per set) are available.

From €12.50 *

Reefing hook TDS

Reefing hook TDS

Professional tool by TeakDeckingSystem (TDS) to remove old deck caulking or marine sealant from deck seams. A hook scraper, where the flanks can be sharpened and whose lower 3,5 mm wide edge can remove the material from the bottom of the seam.Equipped with a rubberised, ergonomic handle.

€54.90 *

Request sent successfully

Request wasn't send - a error occured. Please try again.