Go to homepage
€0.00*
Jobs
Catalogue
Quick order
Filter products now
from 0 € to 5889 €
from 0.4 kg/m to 1.1 kg/m
from 0.5 L to 400 L
from 0 mm to 440 mm
from 40 mm to 600 mm
from 1 Zoll to 8 Zoll
from 1 Zoll to 8 Zoll
from 0 g to 8600 g
from 0 kg to 30 kg
from 5 mm to 160 mm
Filter products now

Pumps & sanitation

Until the middle of the last century, on many yachts and many a smaller professional vessel only a single article from this product category would have been needed - the marine bucket. In the meantime, boats without a toilet have become a rarity. Today, a functional washing, flushing and sanitary area with suitable fittings for fresh water supply and possibly a water heater offers the basic level of comforts and luxury. A well-installed, easy-to-use, low-maintenance on-board toilet ensures long-term peace on board. Especially under bad weather conditions at sea, …

Read more

488 products
Brass pipe-to-hose fitting
Brass pipe-to-hose fitting
Brass pipe-to-hose fitting with external thread and hexagon. Available for different hose diameters.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes and do not indicate the thread diameter.

From €3.20 *
Details
Brass pipe-to-hose fitting
Brass pipe-to-hose fitting
Bronze pipe-to-hose fitting
Bronze pipe-to-hose fitting
Bronze pipe-to-hose fitting with external thread and hexagon. Available for different hose diameters.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €7.65 *
Details
Bronze pipe-to-hose fitting
Bronze pipe-to-hose fitting
PVC hose (food safe)
PVC hose (food safe)
Transparent PVC hose with cross-fabric insert of polyester yarn.Food safe, resistant to chemicals and oil.Temperature resistant from -5°C to +60°C.Also intended for pressurized water systems.

From €2.50 *
Details
EPDM freshwater hose
EPDM freshwater hose
High-quality drinking water hose made of smooth EPDM rubber that is resistant to heat, abrasion and weathering. Lightweight, flexible (bending radius 130 mm) and absolutely light-tight. The hose is food-safe and FDA-compliant, the material does not release any substances into the fresh water and is durable. Can be used in the temperature range -40°C to 100°C and in the pressure range up to 15 bar. Available in blue and red.

From €9.60 *
Details
EPDM freshwater hose
EPDM freshwater hose
EPDM freshwater hose
EPDM freshwater hose
EPDM freshwater hose
Transparent multiflex hose PVC
Transparent multiflex hose PVC
Transparent, thick-walled hose made of flexible PVC with inserted steel spiral for use as a suction or pressure hose. Well suited for bilge pumps and bilge and grey water systems.Limited resistance to oil and grease (may harden).

From €3.95 *
Details
Seawater-proof bronze thru-hull
Seawater-proof bronze thru-hull
Standard length through hull fitting.Made from saltwater resistant bronze alloy CC491K (CuSn5Zn5Pb5-C).Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.You can find suitable seawater-resistant bronze strainers under accessories.

From €23.90 *
Details
Seawater-proof bronze thru-hull
Seawater-proof bronze thru-hull
Hose clamp stainless steel
Hose clamp stainless steel
Solid stainless steel design - all pieces completely stainless.With hexagonal bolts for high torque, high tear resistance and elasticity.

From €1.80 *
Details
Hose clamp stainless steel
Hose clamp stainless steel
A2 Hose clamp narrow, type HL
A2 Hose clamp narrow, type HL
Solid V2A design, all pieces entirely rust-free.With hexagonal bolts for high torque,high tear resistance and elasticity.

From €1.85 *
Details
A2 Hose clamp narrow, type HL
A2 Hose clamp narrow, type HL
Brass reducer with internal/external thread
Brass reducer with internal/external thread
Bronze reducers.BSP inner and outer threads.The thread sizes are the nominal sizes and not the diameter.

From €3.30 *
Details
T-bolt clamp
T-bolt clamp
Heavy, wide hose clamps, made entirely of A2-stainless steel.Hexagonal bolt for easy mounting in hard-to-reach corners. Due to the width particularly well suited for hose mounting on board.Type: HEAVY DUTY.

From €5.90 *
Details
T-bolt clamp
T-bolt clamp
WHALE QUICK CONNECT Pipework (by metre) WX7152
WHALE QUICK CONNECT Pipework (by metre) WX7152
WHALE QUICK CONNECT pipes for cold and hot water systems. The pipes (outer diameter 15 mm / wall thickness approx. 3 mm) made of PE plastic are cut to length, inserted into the connectors, ready! Disassembly and reuse are possible without effort and without tools! Suitable for cold and hot water (max. 65° and max. 6 bar). Material of the connectors: polypropylene, color white.The simple 2-step click system requires no special tools to make a watertight connection and is therefore perfect for mobile applications.

From €5.95 *
Details
WHALE QUICK CONNECT Pipework (by metre) WX7152
WHALE QUICK CONNECT Pipework (by metre) WX7152
Seawater-resistant bronze angle 90°
Seawater-resistant bronze angle 90°
90° angle with inner and outer threads. High quality fitting made from seawater-resistant bronze alloy. The nominal sizes are the thread sizes (BSP) and do not indicate the thread diameter!

From €7.90 *
Details
Brass T-junction internal thread
Brass T-junction internal thread
Brass fittings.

From €5.40 *
Details
WHALE QUICK CONNECT 90° joint 15mm tube WX1503
WHALE QUICK CONNECT 90° joint 15mm tube WX1503
90° angle connector ( type WX1503) from the manufacturer WHALE. Suitable for connecting 15 mm pipes of the WHALE QUICK CONNECT system.WHALE QUICK CONNECT is a practical and very easy to install system for the installation of fresh water systems on board.It is based on a 15 mm pipe system which is suitable for cold and hot water and is very universal thanks to the large variety of fittings. The simple 2-step click system requires no special tools to make a watertight connection and is therefore perfect for mobile applications.

€11.95 *
Details
DOMETIC holding tank vent filter DVF
DOMETIC holding tank vent filter DVF
A vent filter newly developed by DOMETIC, which is installed in the vent line of the black water tank. The filter contains activated carbon and binds unpleasant smells from the septic tank, it provides clean and pleasant air for the whole season.Easy to install, with plastic wall bracket.Comes with hose fittings on both sides, with adaptors for four different hose sizes.Simple replacement - the filter should be changed once per year.

€129.90 *
Details
DOMETIC holding tank vent filter DVF
DOMETIC holding tank vent filter DVF
VIR bronze ball valve
VIR bronze ball valve
Branded ball valve made of seawater-resistant bronze alloy CB491K CuSn5Zn5Pb5-B with full bore. Female thread to ISO 228/1 on both sides, the ball is made of hard chrome-plated brass CW617N with PTFE sealing shells. The lever is made of steel with a special GEOMET corrosion coating, with red PVC coating. Nominal working pressure PN40.A lockable lever is available (see accessories).Gewindeart: BSPGewindeform: zylindrisch, bzw. parallelDie Gewindegrößen sind Nenngrößen, sie bezeichnen nicht den Gewindedurchmesser.

From €19.95 *
Details
VIR bronze ball valve
VIR bronze ball valve
VIR bronze ball valve
Multiflex hose PVC
Multiflex hose PVC
Green transparent PVC hose for drinking water, bilge pumps (also suction side) and on-board toilets.Spiral strengthened and thick-walled version for use as suction or pressure hose.Approved for human consumption. Limited resistance to oil and grease (may harden).

From €4.90 *
Details
GUIDI Ball Valve Bronze with hard chrome plated brass ball
GUIDI Ball Valve Bronze with hard chrome plated brass ball
Ball valve made of the seawater-resistant bronze alloy CC499K (CuSn5Zn5Pb2-C), specially developed for marine applications.The ball is made of hard chrome-plated brass CW617N, an additional special surface treatment prevents the adhesion of dirt and incrustations. The shaft is made of seawater-resistant brass CW625N, the lever and fixing nut are made of stainless steel 304.The lever is coated with PVC (the colour may differ from the one in the photo).Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €39.00 *
Details
GUIDI Ball Valve Bronze with hard chrome plated brass ball
GUIDI Ball Valve Bronze with hard chrome plated brass ball
GUIDI Ball Valve Bronze with hard chrome plated brass ball
GUIDI Ball Valve Bronze with hard chrome plated brass ball
Manual ball valve TRUDESIGN
Manual ball valve TRUDESIGN
On both ends BSP internal thread, colour black with blue handle and a locking nose for a padlock.The ball cock is smooth-running, the ball PTFE sealed with reduced passage.Also available on request with sensors for an electronic position indicator. See under similar products.TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel.Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €52.95 *
Details
Waste hose
Waste hose
Thick-walled, white waste-water hose of PVC with integrated plastic spiral.Formulated for exceptional odor containment, made in Germany, very flexible, does not kink. The surface is smooth and easy to keep clean.

From €6.40 *
Details
Waste hose SPECIAL
Waste hose SPECIAL
Absolutely odor-proof faeces hose with integrated steel spiral.Three-layer design: white CR rubber on the outside, intermediate layer of textile fabric with steel spiral, smooth black EPDM rubber on the inside.The hose is designed for a working pressure of 6 bar and is temperature-resistant from -35°C to +135°C.

From €24.90 *
Details
Waste hose SPECIAL
Waste hose SPECIAL
WHALE QUICK CONNECT Adaptor 1/2"BSP female WX1532
WHALE QUICK CONNECT Adaptor 1/2"BSP female WX1532
Adapter (type WX1532) with 1/2" BSP female thread. Suitable for connection to 15 mm pipes of the WHALE QUICK CONNECT system.WHALE QUICK CONNECT is a practical and very easy to install system for the installation of fresh water systems on board.It is based on a 15 mm pipe system which is suitable for cold and hot water and is very universal thanks to the large variety of fittings. The simple 2-step click system requires no special tools to make a watertight connection and is therefore perfect for mobile applications.

€9.95 *
Details
WHALE QUICK CONNECT Adaptor 1/2"BSP female WX1532
WHALE QUICK CONNECT Adaptor 1/2"BSP female WX1532
WHALE QUICK CONNECT T-joint 15mm tube WX1502
WHALE QUICK CONNECT T-joint 15mm tube WX1502
T-connector (type WX1502) from the manufacturer WHALE. Suitable for connecting 15 mm pipes of the WHALE QUICK CONNECT system.WHALE QUICK CONNECT is a practical and very easy to install system for the installation of fresh water systems on board.It is based on a 15 mm pipe system which is suitable for cold and hot water and is very universal thanks to the large variety of fittings. The simple 2-step click system requires no special tools to make a watertight connection and is therefore perfect for mobile applications.

€14.90 *
Details
WHALE QUICK CONNECT T-joint 15mm tube WX1502
WHALE QUICK CONNECT T-joint 15mm tube WX1502
Brass pipe-to-hose fitting 90° with external thread
Brass pipe-to-hose fitting 90° with external thread
90° elbow hose nozzle made of brass, with external thread and hexagon for screwing in. For various hose diameters.Thread type: BSPThread form: cylindrical or parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €4.90 *
Details
Brass pipe-to-hose fitting 90° with external thread
Brass pipe-to-hose fitting 90° with external thread
… there is nothing more unpleasant than the sudden failure of a ship's toilet. Toplicht offers a larger selection of solid, proven yacht toilets in various designs and price categories. In the Toplicht range you will also find equipment and materials for all sanitary installations above and below the waterline, as well as tanks, filler necks and manual or electric pumps for drinking and waste water, deck and bilge.