Sturdy brass deck fill, with hose nozzle and cast-in labelling in the rim, "WATER", "DIESEL" or "FUEL" can be selected depending on the intended use.Cover with O-ring seal and chain, as well as slotted recess for opening at the top.Polished brass or chrome-plated brass finish.
Fill fitting.Made of polished or chromed brass.For water or fuel.Cover with folding handle and molded writing. The cover is secured against loss with a stainless steel wire.With straight flange for the hose.
Sturdy deck plate made of bronze with brushed or chrome-plated surface. Suitable as a classic deck filler. Large versions can also be used as a deck opening for the passage of crane gear for ships with inboard hot eyes or as a mounting flange for cowls.The deck plate is fitted with an O-ring seal and can be sealed tightly. The internal thread (BSP) runs through the entire opening so that corresponding fittings with an external thread can be screwed in on the underside.Cover versions either with slot or with two recessed holes Ø 5mm (see table). Suitable keys for opening are available under accessories & spare parts.
Graceful designed deck fill with a cantilevered cap, that also covers the mounting screws.The cover is secured with a thin wire rope and has a foldaway handle that allows it to be opened and closed without tools. The corresponding tank designation is engraved in the handle.Available in polished brass or chrome-plated.You will find deck fills with the engraved label "WASTE" for waste water and blackwatertanks corresponding to this design under similar products.
Filler neck for water or diesel made of durable composite plastic. The colored marking of the nozzles prevents confusion during filling.The caps are made of polished stainless steel, with a black plastic ring engraved with the tank marking. The screw cap can be opened with a winch crank.Corresponding plastic pump out deck fills for blackwater and wasterwater can be found under similar products.
Deck fill of A4 stainless steel (AISI 316), polished finish.The matching covers (sold separately) are available with various inscriptions and a foldable handle held captive with spring-loaded studs.The deck fill is suitable for waste tank suction in conjunction with the screw-in pump-out adapter, item no. 1998-100 (see under accessories & spare parts).In combination with pump-out adapter Article-No. 1998-100, the deck fill can also be used to empty wastewater tanks.Comes without cover and screw sockets. You can find these articles similar products.
Filler caps made of A4 stainless steel (AISI 316), polished finish.The caps are available with four different inscriptions depending on the tank content. In addition, a small, coloured plastic label with icon is included in the scope of delivery, which can be glued into the corresponding deck fill to prevent confusion. The hinged handle is captive with spring-loaded pins.Supplied without the deck fill. You can find the matching stainless steel deck fills under similar products. These must be ordered separately.
Deck fill of A4 stainless steel (AISI 316), polished finish.The matching covers (sold separately) are available with various inscriptions and a foldable handle held captive with spring-loaded studs.In combination with screw sockets Article-No. 1998-100, the deck fill can also be used to empty holding tanks.Comes without cover and screw sockets. You can find these articles under accessories.
