VETUS NSF No-Smell-Filter large for Waste Water | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Art. No.	description	model	for hose (mm)	Price (unit)	Delivery time	Note list	Buy

Each waste water tank requires an air breather line, through which unpleasant odours may escape. This can be prevented by installing a VETUS no-smell filter into the breather line.

The filter is made of plastic and can be mounted on the wall. The hose connections are located on the bottom side.

The odor-neutral filter element contains a special odor-absorbing material. The filter element is replaceable and should be renewed once a year.

The optional lid spanner can be used to open the cross lid more easily. You can find this further down on this page under "Accessories".

Questions about the product?

Accessories

Cover spanner for VETUS filters with cross cover

Cover spanner for VETUS filters with cross cover

Cover spanner for easier opening of the cross cover on VETUS filters.The spanner is suitable for cooling water filters type FTR 330 (not for type FTR 140).The spanner also fits the NSF 16 (not the NSF16S), NSF 19, NSF 25 and NSF 38 odour filters.

€29.90 *

VETUS mouning bracket

VETUS mouning bracket

Very practical bracket for the mounting of VETUS filters and other auxiliary equipment.Especially useful for mounting in engine rooms with an isolation of up to 40 mm.AISI 316 stainless steel.Shipping with two mounting bolts.

€34.90 *

Hose clamp stainless steel

Hose clamp stainless steel

Solid stainless steel design - all pieces completely stainless.With hexagonal bolts for high torque, high tear resistance and elasticity.

From €1.50 *

T-bolt clamp

Heavy, wide hose clamps, made entirely of A2-stainless steel.Hexagonal bolt for easy mounting in hard-to-reach corners. Due to the width particularly well suited for hose mounting on board.Type: HEAVY DUTY.

From €5.90 *

Similar products

VETUS NSF16S No-Smell Filter small for Waste Water

VETUS NSF16S No-Smell Filter small for Waste Water

Each waste water tank requires an air breather line, through which unpleasant odours may escape. This can be prevented by installing a VETUS no-smell filter into the breather line.The filter is made of plastic and can be mounted on the wall. The hose connections are located on the bottom side. The NSF16S model is suitable for a 16 mm diameter vent hose.The odor-neutral filter element contains a special odor-absorbing material. The filter element is replaceable and should be renewed once a year.

€109.90 *

Holding tank vent filter

Holding tank vent filter

For installation in the vent line of a holding tank.Two-sided hose attachments of 16 mm and 19 mm.Comes with wall bracket.

€44.95 *

DOMETIC holding tank vent filter DVF

DOMETIC holding tank vent filter DVF

A vent filter newly developed by DOMETIC, which is installed in the vent line of the black water tank. The filter contains activated carbon and binds unpleasant smells from the septic tank, it provides clean and pleasant air for the whole season.Easy to install, with plastic wall bracket.Comes with hose fittings on both sides, with adaptors for four different hose sizes.Simple replacement - the filter should be changed once per year.

€129.90 *

Active carbon filter TRUDESIGN

Active carbon filter TRUDESIGN

For the installation in the ventilation pipe of the black water tank.A Carbon Filter is a useful addition to a holding tank vent pipe to reduce the odour of sewage.The activated carbon in the filter absorbs and converts the odours from your holding tank.Dual tail setup to fit 19 mm and 25 mm hose.Shipping with 2 mounting brackets.

€55.00 *

Brass tank ventilation bent

Brass tank ventilation bent

Bent tank vent.Brass, polished or chromed finish.All vents have metal sleeves.Intended for a maximum hull thickness of 15 mm.Gland for hose D = 16 mm.Available with the gland bent upwards or downwards.

From €24.95 *

Waste hose

Thick-walled, white waste-water hose of PVC with integrated plastic spiral.Formulated for exceptional odor containment, made in Germany, very flexible, does not kink. The surface is smooth and easy to keep clean.

From €6.40 *

Last seen products

More articles from this category

Cover spanner for VETUS filters with cross cover

Cover spanner for VETUS filters with cross cover

Cover spanner for easier opening of the cross cover on VETUS filters.The spanner is suitable for cooling water filters type FTR 330 (not for type FTR 140).The spanner also fits the NSF 16 (not the NSF16S), NSF 19, NSF 25 and NSF 38 odour filters.

€29.90 *

VETUS NSF16S No-Smell Filter small for Waste Water

VETUS NSF16S No-Smell Filter small for Waste Water

Each waste water tank requires an air breather line, through which unpleasant odours may escape. This can be prevented by installing a VETUS no-smell filter into the breather line.The filter is made of plastic and can be mounted on the wall. The hose connections are located on the bottom side. The NSF16S model is suitable for a 16 mm diameter vent hose.The odor-neutral filter element contains a special odor-absorbing material. The filter element is replaceable and should be renewed once a year.

€109.90 *

VETUS NSF No-Smell-Filter large for Waste Water

VETUS NSF No-Smell-Filter large for Waste Water

Each waste water tank requires an air breather line, through which unpleasant odours may escape. This can be prevented by installing a VETUS no-smell filter into the breather line.The filter is made of plastic and can be mounted on the wall. The hose connections are located on the bottom side.The odor-neutral filter element contains a special odor-absorbing material. The filter element is replaceable and should be renewed once a year.The optional lid spanner can be used to open the cross lid more easily. You can find this further down on this page under "Accessories".

From €121.90 *

Holding tank vent filter

Holding tank vent filter

For installation in the vent line of a holding tank.Two-sided hose attachments of 16 mm and 19 mm.Comes with wall bracket.

€44.95 *

DOMETIC holding tank vent filter DVF

DOMETIC holding tank vent filter DVF

A vent filter newly developed by DOMETIC, which is installed in the vent line of the black water tank. The filter contains activated carbon and binds unpleasant smells from the septic tank, it provides clean and pleasant air for the whole season.Easy to install, with plastic wall bracket.Comes with hose fittings on both sides, with adaptors for four different hose sizes.Simple replacement - the filter should be changed once per year.

€129.90 *

Active carbon filter TRUDESIGN

Active carbon filter TRUDESIGN

For the installation in the ventilation pipe of the black water tank.A Carbon Filter is a useful addition to a holding tank vent pipe to reduce the odour of sewage.The activated carbon in the filter absorbs and converts the odours from your holding tank.Dual tail setup to fit 19 mm and 25 mm hose.Shipping with 2 mounting brackets.

€55.00 *

Request sent successfully

Request wasn't send - a error occured. Please try again.