Skip to main content


High-performance bilgepump without pressure switch, laid out as a four-chamber membrane pump.
The pump is self-priming to 2 m, can run dry safely and runs extremely quietly, thanks to rubber mountings.
Attachment: plug with 19 mm hose nozzle, plug with 3/4" male thread.

We exclusively carry FLOJET pumps, which have been developed especially for the marine industry (not camping pumps).

Comes with wide-mesh screen.

Accessories

Multiflex hose PVC
Green transparent PVC hose for drinking water, bilge pumps (also suction side) and on-board toilets.Spiral strengthened and thick-walled version for use as suction or pressure hose.Approved for human consumption. Limited resistance to oil and grease (may harden).

From €4.90 *
Hose clamp stainless steel
Solid stainless steel design - all pieces completely stainless.With hexagonal bolts for high torque, high tear resistance and elasticity.

From €1.80 *
PVC hose (food safe)
Transparent PVC hose with cross-fabric insert of polyester yarn.Food safe, resistant to chemicals and oil.Temperature resistant from -5°C to +60°C.Also intended for pressurized water systems.

From €2.50 *

Similar products

Grey water and bilge diaphragm pump JABSCO 50880
A new generation of diaphragm pump in the one compartment design by pump specialist JABSCO.Ideal for the draining of shallow bilges and shower drains.Maintanance is simplified by the filterless design and the pump is indeed free of clogging.Characteristics:Flow rate: Nominal 16 Litres/min. Self-priming from dry up to 3m (10ft) Flexible installation Dry running capability

From €209.90 *
Electric diaphragm pump WHALE GULPER 220
WHALE GULPER type 220: Electric membrane pump for pumping the bilge or emptying the head or holding tank (grey water pump). Self-priming. Suction lift max. 3 m, dicharge head max. 3 m, combined suction lift / discharge head max. 4m.Odorless running, vibration absorbing rubber feet.Universal installation due to swiveling pump heads.For tube 19mm. Weight 1.5 kg. Dimensions: L x W x H = 273 x 111 x 117 mm. Spare-parts sets available.

From €198.00 *
Electric diaphragm pump
The self priming membrane type pump is especially suitable for pumping polluted liquids, such as toilet waste, bilge water.The robust pump casing is wholly made from plastic and is equipped with rotatable connectors with sleeves, which can easily be demounted. These contain tube valves.This construction guaranties a very flexible mounting, little danger of blockage and simple cleaning of the pump.The strong electric motor is capable of continuous operation. Pump capacity: 27 l/min Maximum suction height:: 3 m Maximum delivery height: 5 m Housing material: plastic, black Membrane material: neoprene rubber Valve material: natural rubber Current draw for 12 V DC 8 AMP Current draw for 24 V DC 5 AMP Hose fittings for 38 mm Weight: 3,7 kg Mesurements: 300 x 320 x 220 mm

From €449.00 *
RHEINSTROM diaphragm pump M50E
Very powerful, self-priming electrical diaphragm pump with reliable industrial motor.This Rheinstrom diaphragm pump has been found to be very reliable over many years. It can be used as a bilge pump, a grey water pump and a delivery pump.Constant delivery rate, high safety against clogging, very good cleaning possibilities.Made of hard-wearing materials, the body is made of seawater-proof cast bronze.Fast and easy cleaning and maintenance and direct access to the valves are obtained by simply opening the lid of the pump. The discharge and suction side may be altered.Technical dataPump performance: 40 l/minDelivery head: 10 mSuction height: 3,5 mConnection: 38 mm hose connectionMotor: 110 WWeight: 9,5 kgA repair kit is available.

From €990.00 *
Pressure water pump FLOJET QUAD 4325
High-performance universal pump with pressure switch, intended as a drinking-water pump (max. 5 taps) or as a deck-wash pump (comes with filter), laid out as a four-chamber membrane pump.The pump is self-priming to 2 m, can run dry safely and runs extremely quietly, thanks to rubber mountings.Attachment: plug with 19 mm hose nozzle, plug with 3/4" thread .We exclusively carry FLOJET pumps, which have been developed especially for the marine industry (not camping pumps).

From €329.00 *
Bilge strainer WHALE
Bilge strainer with check valve, easy to clean.With 19 mm hose connector.The connector can be mounted in three directions: standing, horizontal, sideways.

€64.90 *
Bilge water filter (oil strainer) WAVESTREAM
The MARPOL Convention prohibits the discharge of oily wastewater into the sea. This filter removes the oily substances from the pumped bilge water by a patented filter system, so that the bilge water can be pumped out almost without oil residues and the water pollution is minimized.The filter is installed behind the bilge pump and in front of the ship's passage. It is suitable for oil residues, large dirt must be removed from the bilge before.Supplied with a stainless steel wall mounting plate.Replacement filter cartridges are available, annual replacement is recommended.LLOYD'S REGISTER Type Approved.

From €179.00 *
Float switch RULE SUPERSWITCH 37A
RULE Model No. 37A: This proven and robust floating switch has a high switching power (240 VA) and works for pumps with high initial current. The plastic housing is ultrasonic welded and thus the switch offers a high working security. For 12 - 32 V. Switching capacity: 240 VA.

€89.00 *

Last seen products

More articles from this category

Bilge pump MARCO
High-performance bilge pump, available in various sizes for 12V or 24V systems. Discharge head up to 3 m.The snap-off plastic housing can be opened easily for maintenance and cleaning. Low power requirements.Stainless-steel shaft with a high-quality seal.Built in Italy by MARCO.

From €37.95 *
Submergible bilge pump RULE
Powerful submersible pump from RULE. The pump is made of sturdy plastic and is ideal for smaller boats due to its light and compact nature.The motor is fully enclosed and runs very quietly. The shafts can not rust and are specially sealed against water penetration.The inlet strainer of the pump can be easily removed to clean the pump. The check valve prevents water from flowing back into the bilge, and the ventilated housing optimally prevents air pockets.A thermal shutdown prevents overheating and protects the pump.Also available as RULE AUTOMATIC (RA) automatic pumps. See under similar products.

From €35.90 *
Bilge pump RULE MATE
The proven automatic bilge pump, from US manufacturer RULE.Plastic housing with easily removable sieve baseplate.Quiet and fully encapsulated motor, stainless axis.Can be used as an automatic pump:Type RULE-MATE (RM) is controlled with an integrated electronic switch. Supplied with straight hose nozzles for 25 and 28 mm. 

From €129.00 *
Bilge pump RULE AUTOMATIC
The proven bilgepump from the US manufacturer RULE. Plastic housing with easily removable sieve baseplate. Quiet-running and fully encapsulated motor. Also made as an automatic pump: Type: RULE-AUTOMATIC (RA) works through an automatic microprocessor that checks if there is water in the bilge by briefly running the pump every 150 seconds (without a mechanical switch). Limited power requirements for the test runs: Only approx. 0.2-0.5 Ah per day.

From €135.00 *
Automatic pressure pump WHALE WaterMaster
The very quiet running WHALE WaterMaster is a four chamber diaphragm pump - a further development of the tried and tested UNIVERSAL pump.The pump runs dry without damage (within reason) and is self priming up to 3m, it delivers a smooth constant flow from a specially designed diaphragm.The pump has a fully sealed protective motor housing with completely integrated electronics according to IP 65 and is suitable for use with salt or fresh water.The shipment includes a strainer to protect the pump from debris.Simple installation: WHALE QUICK-CONNECT - 15 mm quick connect plumbing or ½" horsetails or 13mm hose. Measurements (L x W x H): 209 x 179 x 125, Weight: 1600 g.

From €144.00 *
Pressure-water pump WHALE-UNIVERSAL UF1825
Universal Pressure Pump 18 ltrs/min (4.75 US gals/min).High capacity demand and washdown pressure pump.Services up to 6 taps.- Quiet operation- Runs dry without damage- Inlet strainer included- Quick Connect ports with adaptors included- Suitable for use with saltwater and freshwater- Self-priming up to 3 m (10 ft)- Smooth constant flow- Extra protection and safety with wires and pressure switch housed internally- Universal mounting arrangement fits any existing installation.- May also be used with salt water.Supplied with Quick Connect inlet and outlet for fast connection directly to System 15 plumbing. Includes pre-strainer/filter that pivots to suit plumbing direction. 2 x 13mm barbed hose connections and 2 x 1/2″ BSP threaded tails are also included for connection to non-Quick Connect 15 plumbing.

From €279.00 *
Bilge pump WHALE ORCA
Submersible bilgepump with strong permanent magnet motor and special shaft seals.The outer cover can be removed for inspection.Shaft of rust-free steel.These pumps are only partially protected against dry-running, so the installation of the optional floating or sensor switch is recommended.

From €39.90 *
Electric diaphragm pump WHALE GULPER 220
WHALE GULPER type 220: Electric membrane pump for pumping the bilge or emptying the head or holding tank (grey water pump). Self-priming. Suction lift max. 3 m, dicharge head max. 3 m, combined suction lift / discharge head max. 4m.Odorless running, vibration absorbing rubber feet.Universal installation due to swiveling pump heads.For tube 19mm. Weight 1.5 kg. Dimensions: L x W x H = 273 x 111 x 117 mm. Spare-parts sets available.

From €198.00 *
Electric diaphragm pump WHALE GULPER 320
WHALE GULPER type 320: Electric membrane pump for pumping the bilge or pumping out the head or holding tank (grey water pump). Self-priming. Suction lift max. 3m, dicharge head max. 3 m, combined suction lift / discharge head max. 4m.Odorless running, vibration absorbing rubber feet.Universal installation due to swiveling pump heads.A variable tube adaptor connects the GULPER 320 to 19mm or 25mm tube. Weight 1.6 kg. Dimensions: L x W x H = 273 x 111 x 117 mm. Spare-parts sets available.

From €259.00 *
Waste pump WHALE GULPER
Membrane pump for emptying holding tanks.^ Protected against dry-running, self-priming to 3 m, discharge height max. 4 m. Low power draw; 2.5 A (at 12 V)Inlet hose attachments on both sides 38 mm. Dimensions: 340 x 300 x 120 mm. Weight 2.2 kg.

From €499.00 *
Small bilge pump WHALE SUPERSUB
Extremely low-profile, submersible pump with good power, by the renowned pump manufacturer WHALE, which can also be placed between frames and floor boards.Removable sieve, outflow hose adjustable from horizontal to vertical.Article 1441-111 comes with a non-return valve. Versions:SUPERSUB 5012 has a max. pump output of 32 l/min and 25 l/min at 1 meter height. , SUPERSUB 1012 has a max. pump output of 66 l/min and 47 l/min at 1 meter height.Also available in the WHALE SUPERSUB SMART version with automatic sensor switch.

From €49.90 *
Small bilge pump WHALE SUPERSUB-SMART
Extremely low-profile, submersible pump with good power, by the renowned pump manufacturer WHALE, which can also be placed between frames and floor boards.Equipped with a built in, maintenance free 'electric field sensor' as integrated float switch, removable sieve and non-return valve.Outflow hose adjustable from horizontal to vertical.Versions: SUPERSUB SMART 5212 has a max. pump output of 40 l/min and 34 l/min at 1 meter height. SUPERSUB SMART 1212 and 1224 have a pump output of 66 l/min and 47 l/min at 1 meter height.

From €94.90 *
Impeller pump JABSCO UTILITY-PUPPY 2000
Powerful impeller pump with bronze pump head and impeller made of nitrile rubber (oil-resistant), dry self-priming up to 1.20 m. Developed for pumping bilge water. Dry-running protection up to 20 minutes. Capacity 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), suitable for continuous operation.Dimensions 190x120x80 mm.Versions for 12V or 24V on-board voltage are available. Connection 3/4" (inside).

From €439.00 *
RULE LO-PRO Submersible Bilge Pump LP900D / LP900S
Flat, powerful bilge pump for tight spaces with freely adjustable hose outlet (vertical/horizontal) for 3 different hose diameters (19, 25 and 28 mm). All hose nozzles have lip check valves, the motor unit is removable for cleaning, maximum pumping height is 3.4 m.Pumping capacity: 3373 l/h at the same level.2400 l/h at 1 m height difference (1 mWS).Available as standard pump (type LP900D) or as automatic pump (type LP900S) with integrated sensor switch.The sensor has 3 switching modes: in mode "L" the pump switches on at a water height of 33 mm, in mode "H" at 50 mm, in mode "Time" the pump checks every 150 seconds by a short start if water is present and then pumps until the bilge is empty.

From €69.00 *
Pressure water pump SHURFLO NAUTILUS
This pump is specially developed for maritime use in pressure-water installations. Made in the USA by SHURFLO.Benefits:- for direct supply of one tap!- not dry self priming, must be installed at or below tank level,- dry-running safe single chamber pump,- output: 3,8 l/min,- sturdy motor,- very smooth performance, very silent- with hose nozzles for 10 mm tube.

€69.90 *
AQUA KING II Premium 4.0 SHURFLO fresh water pump
The pump AQUA KING II Standard 3.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.8 m and may run dry. A pre-filter ensures clean drinking water. The encapsulated pressure switch start at 2.8 bar and off again at 3.8 bar. The pump is equipped with an integrated bypass for precise and controlled dosing and even water flow, a pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 15.1 l/min,pressure: 2.8 - 3.8 bar,for supplying up to 4 taps,comes with a pre-filter,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose.Angled hose nozzles are also available.

From €189.95 *
SHURFLO LO-FLO automatic fresh water pump
This compact automatic demand fresh water pump offers durability and dependability making it ideal for low volume, intermittent duty applications.The 105 pump self-primes up to 0,75 m / 2.5 feet vertical while delivering over 1.0 GPM.A 12 volt low power consumption motor, equipped with thermal protection and long life pressure switch rated to 2 bar / 30 PSI, provides high pump performance and reliability.Features:- Automatic Demand up to 2 bar / 30 PSI,- Dry self Priming up to 0,76 m vertical,- Long Life Pressure Switch,- Thermally Protected,- Delivers 4 l/min / 1.0 GPM,Dimensions: 173 x 100 x 62 mmHose fitting for 10 mm hose.

€99.90 *
AQUA KING II Junior 2.0 SHURFLO fresh water pump
The pump AQUA KING II Junior 2.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.5 m and may run dry. The encapsulated pressure switch start at 1 bar and off again at 2 bar. A pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 7,6 l/min,pressure: 1 - 2 bar,for supplying up to 3 taps,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose, which can be screwed onto the thread with a quick-release fastener.

€124.95 *
AQUA KING II Standard 3.0 SHURFLO fresh water pump
The pump AQUA KING II Standard 3.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.5 m and may run dry. The encapsulated pressure switch start at 1.3 bar and off again at 2.0 bar. The pump is equipped with an integrated bypass for precise and controlled dosing and even water flow, a pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 11.3 l/min,pressure: 2,4 - 3,1 bar,for supplying up to 3 taps,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose, which can be screwed onto the thread with a quick-release fastener.

From €139.95 *
AQUA KING II Supreme 5.0 SHURFLO fresh water pump
The pump AQUA KING II Supreme 5.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.8 m and may run dry. A pre-filter ensures clean drinking water. The encapsulated pressure switch start at 2.8 bar and off again at 3.8 bar. The pump is equipped with an integrated bypass for precise and controlled dosing and even water flow, a pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 18.9 l/min,pressure: 2.8 - 3.8 bar,for supplying up to 5 taps,comes with a pre-filter,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose, which can be screwed onto the thread with a quick-release fastener.

From €226.95 *